ZyXEL Communications OLT-2300 Series Handbuch

OLT-2300 Series

Chassis-based Optical Line Terminal

Support Notes

Version1.0

Nov. 2007

ZyXEL OLT-2300 Series Support Notes

All contents copyright ٛ2006 ZyXEL Communications Corporation. 1



OLT Management and Maintenance ...............................................3

Firmware Upgrade .................................................................3

Using the Web Configurator...............................................3

Using the Console Port:.....................................................4

Using FTP: ......................................................................4

Restore a Configuration File ....................................................4

Using the Web Configurator:..............................................4

Using the Console Port:.....................................................5

Using FTP: ......................................................................6

Backing Up a Configuration File ...............................................6

Using the Web Configurator:..............................................6

Using the Console Port:.....................................................7

Using FTP: ......................................................................7

Load Factory Defaults.............................................................7

Using the Web Configurator:..............................................7

Using the Console Port:.....................................................8

General Networking.....................................................................8

Switching security .................................................................9

Setting up 802.1x Radius Authentication. .......................................9

Port Authentication: RADIUS Setup ....................................9

RADIUS Server Setup..................................................... 10

Create User Account....................................................... 10

Supplicant Setup (Windows XP) .......................................11

802.1x/MD5-challenge setup ........................................... 11

Port-based VLAN Introduction ............................................... 14

Setting Port-based VLAN............................................................14

Centralized Management ...................................................... 18

Introduction to SNMPc and NetAtlas............................................. 18

SNMPc Overview............................................................ 19

EMS Overview ...............................................................20

FAQ ........................................................................................28

What is the rationale of wavelength-division multiplexing (WDM)?

........................................................................................ 28

Why single mode is necessary for PON network?...................... 29

Why do we need PON not point-to-point fiber network?............. 29

How is PON optical performance specified?.............................. 30

What kind of the fiber connector ZyXEL GEPON product used? ... 30

What is Optical splitter?........................................................ 31

What is splitter “uniformity”?................................................. 31

What is the meaning of fixed attenuation and optical fiber

attenuation? ....................................................................... 32

What is the power budget value?........................................... 32

How do I design my PON network from the power budget?........ 33

ZyXEL OLT-2300 Series Support Notes

All contents copyright ٛ2006 ZyXEL Communications Corporation. 2

Lab environment example..................................................... 33

Field site environment example .............................................34

What are the default IP parameter settings? ......................36

What is the default login Name and Password to log into the Web

Configurator? ................................................................ 36

How to access my OLT through the console port? ...............36

What is default login password for console, telnet, and FTP login?

................................................................................... 36

How to change the password?.......................................... 36

How to access the Command Line Interface (CLI)? .............36

If I have forgotten the password, how to reset the password to

the default setting? ........................................................ 37

How to configure the IP address? .....................................37

Is Online Help available on the Web Configurator?..............37

How to restart device from the Web Configurator?.............. 38

How to check the current running firmware version?........... 38

Is the GEPON transceiver hot-swappable? .........................38

Is the mini GBIC transceiver hot-swappable? ..................... 38

Can I enable IGMP snooping on the OLT which is acting as an

IGMP Router? ................................................................ 38

ZyXEL OLT-2300 Series Support Notes

All contents copyright ٛ2006 ZyXEL Communications Corporation. 3

OLT Management and Maintenance

Firmware Upgrade

Using the Web Configurator

1. Download (and unzipped) the correct model firmware to your computer.

2. Click Management > Maintenance in the navigator panel to display the

following screen.

3. Click the “Click Here” link for Firmware Upgrade to display the following screen.

ZyXEL OLT-2300 Series Support Notes

All contents copyright ٛ2006 ZyXEL Communications Corporation. 4

4. In the File Path field, click Browse to locate the firmware file.

5. Click Upgrade to start the firmware upgrade process.

Using the Console Port:

1. Download (and unzipped) the correct model firmware to your computer.

2. Connect to the console port and launch a Terminal Emulation software

3. Restart the OLT to enter the debug mode via the terminal.

4. Enter “ATUR”.

5. Use the X-modem protocol to transfer (Send File) the firmware.

6. Enter “ATGO” to restart the OLT after the file transfer is complete and the

firmware upgrade process is done.

Using FTP:

1. Download (and unzipped) the correct model firmware to your computer.

2. Launch the FTP client on your computer to log into OLT. (From the command

prompt, type “ftp <OLT IP>”).

3. Press [ENTER] when prompted for a user name.

4. Enter the administrator login password to access the OLT and display FTP

prompt.

5. Enter “bin” to set the transfer mode to binary.

6. Use “put” to transfer the firmware from the computer to the OLT, for example:

“put firmware.bin ras” transfers the firmware on your computer (firmware.bin) to

the OLT and renames it to “ras”.

7. Enter “bye” to log out from the OLT.

Restore a Configuration File

Using the Web Configurator:

1. Click Management > Maintenance in the navigator panel to display the

following screen.

ZyXEL OLT-2300 Series Support Notes

All contents copyright ٛ2006 ZyXEL Communications Corporation. 5

2. Click the “Click Here” link for Restore Configuration to display the following

screen.

3. In the File Path field, click Browse to locate the firmware file.

4. Click Restore to start restoring configuration.

Using the Console Port:

1. Connect to the console port and launch Terminal Emulation software.

2. Restart the OLT to enter the debug mode via the terminal.

3. Enter “ATLC”

4. Use X-modem protocol to transfer (Send File) the configuration file (with a .rom

file extension).

5. Enter “ATGO” to restart the OLT after file transfer and the configuration restore

processes are complete.

ZyXEL OLT-2300 Series Support Notes

All contents copyright ٛ2006 ZyXEL Communications Corporation. 6

Using FTP:

1. Download (and unzipped) the correct model firmware to your computer.

2. Launch the FTP client on your computer to log into the OLT. (From the

command prompt, type “ftp <OLT IP>”.

3. Press [ENTER] when prompted for a user name

4. Enter the administrator login password to access the OLT and display FTP

prompt.

5. Enter “bin” to set the transfer mode to binary.

6. Use “put” to transfer the configuration file from the computer to the OLT, for

example: “put comfig.rom rom-0” transfers the configuration file on your

computer (config.rom) to the OLT and renames it to “rom-0”.

7. Enter “bye” to log out from the OLT.

Backing Up a Configuration File

Using the Web Configurator:

1. Click Management > Maintenance in the navigator panel to display the

following screen.

2. Click the “Click Here” link for Backup Configuration to display the following

screen.

ZyXEL OLT-2300 Series Support Notes

All contents copyright ٛ2006 ZyXEL Communications Corporation. 7

3. Click Backup to display the File Download dialog. Then, click Save to back up

the configuration text file to a location you specify on your computer.

Using the Console Port:

1. Connect to the console port and launch a Terminal Emulation software.

2. Restart the OLT to enter the debug mode via the terminal.

3. Enter “ATTD”.

4. Use X-modem protocol to transfer (Receive File) the configuration file (with

a .rom file extension).

5. Enter “ATGO” to restart the OLT after file transfer and the configuration backup

processes are complete.

Using FTP:

1. Download (and unzipped) the correct model firmware to your computer.

2. Launch the FTP client on your PC to log into the OLT. (From the command

prompt, type “ftp <OLT IP>”

3. Press [ENTER] when prompted for a user name

4. Enter the administrator login password to access the OLT and display FTP

prompt.

5. Enter “bin” to set the transfer mode to binary.

6. Use “get” to transfer the configuration file from the OLT to your computer, for

example: “get rom-0 config.rom” transfers the configuration file on the OLT

(rom-0) to your computer and renames it “config.rom”.

7. Enter “bye” to log out from the OLT.

Load Factory Defaults

Using the Web Configurator:

1. Click Management > Maintenance in the navigation panel to display the

following screen.

ZyXEL OLT-2300 Series Support Notes

All contents copyright ٛ2006 ZyXEL Communications Corporation. 8

2. Click “Click Here” link for Load Factory Default.

3. A dialog box pops up with the “Are you sure you want to load factory defaults?”

prompt.

4. Click OK.

5. Click OK again to start the configuration reset process. After it is complete, the

device automatically restarts.

6. Please note that the IP address of the OLT is now 192.168.0.1.

Using the Console Port:

1. Connect to the console port and open the Terminal Emulation Software.

2. Enter the administrator login password to log into the CLI. Enter “erase run” to

load the factory default configuration.

General Networking

ZyXEL OLT-2300 Series Support Notes

Switching security

Setting up 802.1x Radius Authentication.

Port Authentication: RADIUS Setup

Click Advanced Application> EPON Advance> Port Authentication in the

navigation panel to display the configuration screen as shown. Set the RADIUS

server IP address, UDP port and shared Secret. Make sure the information you

have entered is the same as the RADIUS server. Then click Apply to make the

settings take effect.

Click the 802.1x link to display the 802.1x configuration screen. Select the Active

check box to enable and then select the Active for a port to enable 802.1x

authentication on that port. You can leave the other settings to the default values.

Click Apply to save your changes.

Inhaltsverzeichnis

Andere ZyXEL Communications Touch-Terminal Handbücher

ZyXEL Communications

ZyXEL Communications OLT-1308 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung