ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Confidential

ZyXEL

Firmware Release Note

NBG318S

Release 3.60(AMR.2)C0

Date: 11/08/2007

Author: Jones Xu

360AMR2C0(RELEASE).doc 1/23

ZyXEL Confidential

ZyXEL NBG318S Standard Version

release 3.60(AMR.2)C0

Release Note

Date: 11/08/2007

Supported Platforms:

ZyXEL NBG318S

Versions:

ZyNOS Version: V3.60(AMR.2) | 11/08/2007

Bootbase Version: V1.01 | 05/08/2007 12:40:00

Notes:

1. MSN Video ALG only support with MSN 7.0 above and the default port (1863)

should not be changed.

2. Bit Torrent ALG support following tools: BitComet 0.58, BitSpirit v3.1.0, BitLord

1.1, G3 Torrent v0.9999, Aeureus 2.3.0.4, BitTornado T-0.3.12

3. To conform to the local policy, some countries are not allowed to use 802.11g Turbo

mode. These countries are: Argentina, Brazil, Ecuador, Japan, South Korea, and

Malaysia. The function will be disabled automatically despite the device settings.

4. We support up to 27 concurrent WLAN STAs at the same time if WPA-PSK was

used.

5. Homeplug device can not be used as a hub to many Ethernet clients (such as PC or

Laptops) when you are setting up QoS scenario. You should connect one client to

one Homeplug device in this case.

Known Issues:

1. NetBIOS traffic between WAN & LAN would be blocked if firewall was enabled.

2. Delete the trigger port rule won’t take effect immediately, they work until aged out.

3. VoIP(SIP) can not work if you turns on the Bandwidth Management feature.

4. Your device will encounter errors if you upload the game list file with wrong

formats. For example, too long text in a single line of the game list file.

5. You may need to restart your device to let Bandwidth Management traffic control on

the direction “To WAN” take effect.

6. You may get a lower performance if you have turned on the Bandwidth

Management feature with any active rules.

360AMR2C0(RELEASE).doc 2/23

ZyXEL Confidential

7. HomePlug LED lights up even if it’s not within any management network.

8. The Homeplug Rx statistics may not be updated at the first moment when you just

power it on.

9. The priority mapping can’t be disabled even you set “None” to Homeplug QoS

Priority Mapping.

Features:

Modification in 3.60(AMR.2) | 11/08/2007

1. Change 3.60(AMR.2)b5 to 3.60(AMR.2) FCS version.

Modification in 3.60(AMR.2)b5 | 10/31/2007

1. [BUG FIXED]

SPR: 071029620

Symptom: DUT exception when unplug ethernet cable.

Condition:

Step1. Set PPPoE encapsulation mode with nailed-up connection

Step2. Do ping out to check PPPoE work

Step3. Unplug ethernet cable, DUT exception

2. [BUG FIXED]

SPR: 071029589

Symptom: When WPS function disable, the wireless beacon still has the WPS info.

Condition: When WPS function disable, the wireless beacon still has the WPS info,

please remove it!

3. [BUG FIXED]

SPR: 071029618

Symptom: If user enable wireless Super mode, GUI doesn’t block the RTS/CTS

/Fragmentation threshold items.

Condition: If user enable wireless Super mode, GUI doesn’t block the RTS/CTS

/Fragmentation threshold items.

4. [BUG FIXED]

SPR: 071030689

Symptom: From the Web , when we disable the Wireless Lan, function can't work.

Condition:

1. load default setting

2. open the WEB, /Network/Wireless Lan ,disable the Wireless Lan,

3. it still broadcast the beacon

5. [BUG FIXED]

SPR: 071030707

Symptom: All priority are changed to "Highest" while user select HomePlug QoS

"None".

Condition:

1. Select HomePlug QoS "None", and save it.

2. All Priority are changed to "Highest".

360AMR2C0(RELEASE).doc 3/23

ZyXEL Confidential

3. Select HomePlug QoS "VLAN" (or TOS), and save it.

4. All Priority still are "Highest".

Modification in 3.60(AMR.2)b4 | 10/22/2007

n/a.

Modification in 3.60(AMR.2)b3 | 10/22/2007

1. [BUG FIXED]

SPR: 071023145

Symptom: Fimeware can't be uploaded via console port

Condition:

1. Fimeware can't be uploaded via console port

Modification in 3.60(AMR.2)b2 | 10/19/2007

6. [BUG FIXED]

SPR: 071001034

Symptom: WLAN default should be enabled.

Condition:

1. upload ras & rom-0

2. check WLAN default setting

3. WLAN should be enabled by default

7. [BUG FIXED]

SPR: 071002054

Symptom: HomePlug QoS tab should be removed from "Basic" mode

Condition:

1. HomePlug QoS tab should be removed from "Basic" mode

8. [BUG FIXED]

SPR: 071002058

Symptom: Change "TX" to "Tx" in HomePlug link info page

Condition:

1. In HomePlug link info page, please change "TX" to "Tx"

9. [BUG FIXED]

SPR: 071002059

Symptom: HomePlug's "QoS" tab is gone in other language

Condition:

1. HomePlug's "QoS" tab is gone in other language

10. [BUG FIXED]

SPR: 071005368

Symptom: LAN DNS default server type shoule be First DNS Relay, Second None,

Third None.

Condition:

1. Firmware version 3.60(AMR.1)b1, [FEATURE CHANGED] The default settings

in GUI DHCP Server/Advanced/DNS settings is "DNS Relay"

2. But 3.60(AMR.2)b1, DHCP Server/Advanced/DNS settings is "From ISP"

11. [BUG FIXED]

360AMR2C0(RELEASE).doc 4/23

ZyXEL Confidential

SPR: 071005374

Symptom: DUT can't save IP port number =10000 in the HomePlug QoS page

Condition:

1. In HomePlug QoS page, DUT can't save the range(10000<= IP port number <=

65535)

12. [BUG FIXED]

SPR: 071008438

Symptom: DUT disconnect from FTP Server when run FTP stress test with PPTP

encapsulation

Condition:

1. Setup PPTP configuration with dynamic IP address.

2. Run FTP data transfer over night.

3. DUT disconnect with FTP Server

13. [BUG FIXED]

SPR: 071008470

Symptom: Wireless Super G throughput is under Criterion

Condition:

1. In wireless Super G throughput, Rx(Client to AP) throughput is under

criterion(<20 Mbps)

2. Please reference the PQA test report

Modification in 3.60(AMR.2)b1 | 09/21/2007

14. [FEATURE ENHANCED]

Support WPS.

15. [FEATURE ENHANCED]

Support Homeplug QoS.

16. [BUG FIXED]

SPR: 070330946

Symptom: IGMP + wireless do not work well

Condition:

1. In Ethernet WAN mode, Enable IGMP in WAN/LAN

2. Confiog Wreless security= No security

3. IGMP server in WAN side

4. One wireless client associate to DUT and subscribe IGMP(Cisco IPTV)

program(this program is about 1.8M bps)

5. The wireless client just get the sound, not video

Modification in 3.60(AMR.1) | 09/06/2007

Change 3.60(AMR.1)b4 to 3.60(AMR.1) FCS version.

Modification in 3.60(AMR.1)b4 | 08/21/2007

360AMR2C0(RELEASE).doc 5/23

ZyXEL Confidential

1. [BUG FIXED]

SPR: 070711538

Symptom: Send a "query" packet to WAN port, no "report" packet from WAN port

Condition:

1. Send a "query" packet to WAN port

2. Not get "report" packet from WAN port.

2. [BUG FIXED]

SPR: 070810860

Symptom: DUT crash continually when doing syslog with enable logs og Firewall LAN to

WAN.

Condition:

1. enable Logs of Firewall LAN to WAN

2. seutp Log, enable all "Log categories" & "Syslog Logging"> Server IP address

192.168.1.33, and then Apply

3. DUT crash continually

3. [BUG FIXED]

SPR: 070814121

Symptom: Exception happen while change WAN mode from HomePlug WAN mode to

Router mode(Always reproducible)

Condition:

1. Load to default setting

2. Enable MBM function

3. Enable the syslog function, and fill the syslog IP address

4. Change the WAN mode from Router mode to HomePlug WAN mode

5. Change the HomePlug WAN mode to Router mode

6. Exception happen

4. [BUG FIXED]

SPR: 070809663

Symptom: Via Auto-Bridge function, DUT fail to change mode from AP mode to HomePlug

WAN.

Condition:

1. Load to default setting.

2. Change to HomePlug WAN mode

3. Change mode from HomePlug WAN to AP mode via Auto-Bridge function

4. User want to change back to HomePlug WAN mode from AP mode via Auto-Bridge

function, but it fail(DUT will change back to Router mode)

5. [BUG FIXED]

SPR: 070808573

Symptom: DUT DHCP server can not work well after DUT change mode from AP mode to

Router via "Auto-Bridge" function.

Condition:

1. Load to default setting

2. Change LAN IP= 192.168.100.1, DHCP server= 192.168.100.33 and pool=32

3. Change to AP mode from Router mode via Auto-Bridge function.

4. Change back to Router mode via Auto-Bridge function again.

5. Wired LAN host renew IP address from DHCP server

6. But the host get 192.168.1.33/gateway=192.168.1.1(Check the DUT

MAC=00:00:00:00:00:00)

7. Check DUT's IP address via CLI command "ip if", DUT's IP address=192.168.100.1

6. [BUG FIXED]

360AMR2C0(RELEASE).doc 6/23

ZyXEL Confidential

SPR: 070810775

Symptom: PPTP default PPTP Configuration = "Use Fixed IP Address".

Condition:

1. Load to default setting

2. Change WAN setting from "Ethernet" to "PPTP"

3. Check the default PPTP configuration = "Use Fixed IP Address".

4. Please change the default PPTP configuration = "Get automatically from ISP".

Modification in 3.60(AMR.1)b3 | 08/02/2007

1. [BUG FIXED]

HomePlug WAN support auto-bridge.

2. [BUG FIXED]

In HomePlug WAN mode, local PC sometimes gets WAN domain ip during initial time.

Modification in 3.60(AMR.1)b2 | 08/01/2007

1. [BUG FIXED]

Support AP mode for auto-bridge.

2. [BUG FIXED]

SPR: 070711538

Symptom: Send a "query" packet to WAN port, no "report" packet from WAN port

Condition:

1. Send a "query" packet to WAN port

2. Not get "report" packet from WAN port.

3. [BUG FIXED]

SPR: 070712653

Symptom: Use Buffalo as the enrollee to run WPS, DUT exception

Condition:

1. Use Vista as external registrar (Wired LAN)

2. Use Buffalo as the enrollee to join this network

3. In WPS process, DUT exception

2. If the user uses Atheros (use jumpstart) as external registrar (WLAN), then the result is

the same

4. [BUG FIXED]

SPR: 070709362

Symptom: Please modify the wording "UPNP" to "UPnP" in the WPS page

Condition:

1. In WPS page, the String "Note: If you enable WPS, the UPNP service will be turned on

automatically."

2. Please modify the wording "UPNP" to "UPnP"

5. [BUG FIXED]

360AMR2C0(RELEASE).doc 7/23

ZyXEL Confidential

SPR: 070709366

Symptom: The re-authentication timer is changed to "1800" after user run WPS process

Condition:

1. The re-authentication timer default value is "0"

2. Vista writes the wireless security via WPS

3. The re-authentication timer is changed to "1800"

6. [BUG FIXED]

SPR: 070711539

Symptom: If the IGMP group entry is over 29 group, IGMP packet will be flooding in the

other port

Condition:

1. Make 30 streams from IGMP server to DUT WAN port

2. Make 30 groups join packet from DUT's LAN port 1

3. The other LAN ports will receive the IGMP blooding packet(These blooding packet will be

dropped)

7. [BUG FIXED]

Symptom: If Daylight saving is already enable, time server doesn’t work.

Condition:

1. Manually set time, and enable daylight saving. Apply setting.

2. check time server, apply setting. Time server doesn’t work.

8. [BUG FIXED]

Symptom: AP mode change router mode by auto-bridge cause exception

Condition:

1. WAN get auto-bridge ip in Router mode, and change mode to AP mode.

2. reset device, and pull out WAN cable

3. Change WAN to non auto-bridge domain. After WAN get ip and change AP mode to

router mode, device exception.

Modification in 3.60(AMR.1)b1 | 07/23/2007

1. [FEATURE ENHANCED]

Support Windows Vista.

2. [FEATURE ENHANCED]

Support EMule in Bandwidth Management.

3. [FEATURE ENHANCED]

Support WCN (Windows Connect Now)

4. [FEATURE ENHANCED]

Support multiple Firewall rules. Each rule has its own schedule and can apply to specific

IP addresses.

5. [FEATURE CHANGED]

The default settings in GUI DHCP Server/Advanced/DNS settings is “DNS Relay”

6. [FEATURE ENHANCED]

360AMR2C0(RELEASE).doc 8/23

ZyXEL Confidential

Improvements on GUI multilingual selection.

7. [FEATURE ENHANCED]

HomePlug support for Intellon v2.0 functionality

1. FW/BIP upgrade

2. Push-button security and sync issue

8. [BUG FIXED]

SPR: 070502082

Symptom: ALG_H.323 can’t work with NetMeeting.

Condition:

1. LAN host open NetMeeting to call WAN host NetMeeing

2. LAN host can’t hear the voice from WAN host.

9. [BUG FIXED]

SPR: 070326639

Symptom: DUT can’t get IP address after change ISP.

Condition:

1. DUT connect to ISP-1, and get IP address as 192.168.14.100

2. LAN host ping 168.95.1.1 –t

3. change DUT connection to ISP-2

4. DUT can’t get IP address from ISP-2

10. [BUG FIXED]

SPR: 070702047

Symptom: device can not drop connections then redial to PPTP server

Condition:

1. Step1. reset to factory default

2. Step2. set Encapsulation mode be ”PPPoE” , work for a while

3. Step3. set Encapsulation mode be ”PPTP” , device can not drop connections then redial

to PPTP server

Modification in 3.60(AMR.0) | 05/31/2007

Change 3.60(AMR.0)b6 to 3.60(AMR.0) FCS version.

Modification in 3.60(AMR.0)b6 | 05/28/2007

1. [BUGFIX]

SPRID: 070524314

Symptom: Symptom: In GUI, users set the RADIUS accounting port as 1813 and save it, go

to status page and back, the RADIUS accounting port as "0".

Modification in 3.60(AMR.0)b5 | 05/21/2007

1. [GUI CHANGE]

To refine the GUI Homeplug strings.

360AMR2C0(RELEASE).doc 9/23

ZyXEL Confidential

Modification in 3.60(AMR.0)b4 | 05/04/2007

2. [BUGFIX]

SPRID: 070426287

Symptom: Edit the MAC Address in Out of network DUT or Active DUT. DUT add new MAC

Address in My HomePlug Network list. It should only change the MAC Address.

3. [BUGFIX]

SPRID: 070426291

4. [BUGFIX]

SPRID: 070426293

Symptom: Please add a space in the Wizard finish page.

Condition:

1. In Wizard finish page, there is a description "Check our exciting range of ZyXEL products

atwww.zyxel.com "

2. Please add a space between "at" and "www.zyxel.com"

5. [BUGFIX]

SPRID: 070417744

Symptom: In Chinese language, please help to change "移至基本設定" to "進入基本設定"

while user login the system.

Condition:

1. While user login system, system ask user to select one hyper-link to enter system.

2. In Chinese language, please change "移至基本設定" to "進入基本設定"

6. [BUGFIX]

SPRID: 070417742

Symptom: In Chinese language, it show "HomePlug AV (影音)" in the interface status of the

status page

Condition:

Please change the "HomePlug AV (影音)" to "HomePlug AV"

7. [BUGFIX]

SPRID: 070417743

Symptom: In Chinese language, it show "成員行動"(Member Action) in the HomePlug table.

Condition:

1. In Chinese language, it show "成員行動"(Member Action) in the HomePlug table.

2. It is very strange, please help to modify it.(Maybe "編輯成員" or else)

Modification in 3.60(AMR.0)b3 | 4/16/2007

1. [BUGFIX]

SPRID: 070411506

Symptom: In the HomePlug WAN mode, the Interface Status display wrong information

360AMR2C0(RELEASE).doc 10/23

Andere Handbücher für NBG318S Series

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications NBG-334SH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301-PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-2000 Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAH7608 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-418N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XTREMEMIMO X-550 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-330W - V1.90 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-330W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-460N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6616 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-T1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-4615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG 5715 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EX3301-TO Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 660HW-D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8924-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-460N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR G5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-320W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5317-T20A Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung