2N Access Unit M Bedienungsanleitung
www.2n.cz
Access Unit M
Access Control
Installation manual
Version: 1.0
The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of
telecommunications equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways,
private branch exchanges (PBX), and door and lift communicators. 2N
TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years
and represented a symbol of stability and prosperity on the telecommunications
market for almost two decades. At present, we export our products into over 120
countries worldwide and have exclusive distributors on all continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands
protected by law.
2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find
information and to answer your questions about 2N products and services. On www.
faq.2n.cz you can find information regarding products adjustment and instructions for
optimum use and procedures „What to do if...".
2N TELEKOMUNIKACE a.s. hereby declares that the 2N product complies with all
basic requirements and other relevant provisions of the 1999/5/EC directive. For the
full wording of the Declaration of Conformity see the CD-ROM (if enclosed) or our
website at www.2n.cz.
The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by
this standard and guarantee a high quality, technical level and professional aspect of
all our products.
2N TELEKOMUNIKACE a.s., www.2n.cz 3/56
Content
1. Product Overview
1.1 Components and Associated Products
1.2 Terms and Symbols
2. Description of Installation
2.1 Before You Start
2.2 Mechanical Installation
2.3 Electric Installation
2.4 Extending Module Connection
3. Detection of 2N Access Unit M using 2N® Network Scanner
4. Factory Reset
5. Maintenance
6. Status Signaling
7. Technical Parameters
7.1 General Drawings
8. Supplementary Information
8.1 General Instructions and Cautions
8.2 Troubleshooting
8.3 Directives, Laws and Regulations
2N TELEKOMUNIKACE a.s., www.2n.cz 5/56
Basic Features
2N Access Unit M is an elegant and reliable access IP system equipped with a number
of useful functions.
2N Access Unit M is a single-module access system available in several versions.
All the 2N Access Unit M versions include an integrated card reader module which ,
helps control access using an RFID card. With additional software settings, you can
use the card to control more functions than just door lock switching too.
The 2N Access Unit M keypad version helps you control the electric lock switch by
entering a valid numeric code via the numeric keypad. With additional software
settings, you can use the numeric code to control more functions than just door lock
switching too.
The 2N Access Unit M Bluetooth version helps you control the lock switch using the 2N
application installed in your smartphone.Mobile Key
®
2N Access Unit M is designed as a robust, mechanically resistant IP55-rated access
system, which withstands any weather conditions without requiring additional
accessories.
The installation of is very easy. All you have to do is connect the 2N Access Unit M
system to your LAN via a mains cable. Feed the access system either from a 12V
power supply or your PoE supporting LAN.
To configure 2N Access Unit M
use a PC equipped with any Internet browser. Use 2N
®
to bulk manage extensive access system installations easily. Access Commander
2N TELEKOMUNIKACE a.s., www.2n.cz 6/56
Advantages of Use
Elegant mullion design
Weather resistance (IP 55)
Easy wall (surface) mounting (brick/pasterboard walls, door frames)
Integrated electric lock switches with wide setting options
Integrated RFID card reader module
Bluetooth module version
Backlit touch keypad version
LAN (PoE) or external 12V power supply
Configuration using web interface
HTTP server for API configuration
SNTP client for time synchronization
SMTP client for email sending, Picture to Email feature
TFTP/HTTP client for automated firmware and configuration upgrade and
update
2N TELEKOMUNIKACE a.s., www.2n.cz 7/56
1.1 Components and Associated Products
Main Units
Part No. 916112
2N Access Unit M 13.56 MHz, NFC ready
®
is used for reading RFID cards in the 13.56 MHz bandwidth with the
NFC support. Combining an access reader and a controller, the
device is used for access control inside and outside of buildings.
The following RFID cards can be read:
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916112-S
2N Access Unit M secured 13.56 MHz, NFC ready
®
is used for reading secured RFID cards in the 13.56 MHz bandwidth
with the NFC support. Combining an access reader and a controller,
the device is used for access control inside and outside of buildings.
The following RFID cards can be read:
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)
2N TELEKOMUNIKACE a.s., www.2n.cz 8/56
Main Units
Part No. 916114
2N Access Unit M RFID 125 kHz, 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz and 13.56 MHz
bandwidths with the NFC support. Combining an access reader and
a controller, the device is used for access control inside and outside
of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916114-S
2N Access Unit M RFID 125 kHz, secured 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz bandwidth and
secured cards in the 13.56 MHz bandwidth with the NFC support.
Combining an access reader and a controller, the device is used for
access control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)
2N TELEKOMUNIKACE a.s., www.2n.cz 9/56
Main Units
Part No. 916115
2N Access Unit M Bluetooth & RFID 125 kHz, 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz and 13.56 MHz
bandwidths with the NFC support. Combining an access reader, a
Bluetooth module and a controller, the device is used for access
control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916115-S
2N Access Unit M Bluetooth & RFID 125 kHz, secured 13.56 MHz,
®
NFC
is used for reading RFID cards in the 125 kHz bandwidth and
secured cards in the 13.56 MHz bandwidth with the NFC support.
Combining an access reader, a Bluetooth module and a controller,
the device is used for access control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)
2N TELEKOMUNIKACE a.s., www.2n.cz 10/56
Main Units
Part No. 916116
2N Access Unit M Touch Keypad & RFID 125 kHz, 13.56 MHz, NFC
®
is used for reading RFID cards in the 125 kHz and 13.56 MHz
bandwidths with the NFC support. Combining an access reader, a
touch keypad and a controller, the device is used for access control
inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
Part No. 916116-S
2N Access Unit M Touch Keypad & RFID 125 kHz, secured 13.56
®
MHz, NFC
is used for reading RFID cards in the 125 kHz bandwidth and
secured cards in the 13.56 MHz bandwidth with the NFC support.
Combining an access reader, a touch keypad and a controller, the
device is used for access control inside and outside of buildings.
The following RFID cards can be read:
EM4xxx
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
Felica
ST SR(IX)
2N Mobile Key
®
HID SE (Seos, iClass SE, Mifare SE)
License
Part No. 916012 2N Access Unit NFC license
Andere Handbücher für Access Unit M
1
Inhaltsverzeichnis
Andere 2N IP-Zugriffskontrollsysteme Handbücher
