3idee ox-mag Bedienungsanleitung
www.3idee.eu
ox-mag VESA adapter
Assembly instructions
The VESA adapter is compatible with the following products from MSI (msi.com)
compatible:
Optix AG321CQRDE, Optix MAG301CR2, Optix MAG342CQR, Optix
MAG342CQRV, Optix MAG342CQRVDE
The VESA adapter allows you to conveniently mount your MSI brand monitor to a
monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and
nuts for this.
If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels. (not included in the scope of delivery)
2
Assembly instructions
Horizontal / Vertical Alignment
Not all VESA adapters and monitors are suitable for vertical alignment.
This is due to the geometry of the adapter / monitor, which is sometimes not otherwise feasible.
We would like to point out that this information should not be disregarded in any case, because the
adapter comes very quickly to its durability limit if the mounting is not specified.
We always try to develop monitors for vertical (upright) mounting as well.
The standard orientation of a monitor is horizontal.
Horizontal mounting: YES
Vertical mounting: YES
3Assembly instructions
Important Safeguards
Please read these instructions carefully and keep them for future reference.
If you pass the product on to third parties, these instructions should also
always be given. Failure to follow these instructions may result in injury or
damage to people and the product, for which we cannot accept any liability.
IMPORTANT - KEEP FOR FUTURE REFERENCE.
- Use of this product should always be in accordance with the specified safety instructions.
- Do not exceed the maximum weight of the compatible monitor models or serious injury or property
damage may result.
- Observe the maximum ambient temperature of 35°C when using the product.
- Do not mount the VESA adapter near a heat source or under direct sunlight as this may heat up the
adapter.
- Check whether your mounting point (e.g. monitor arm) can withstand the weight of the monitor with
VESA adapter.
- The product is designed exclusively for mounting with a hole pattern of 75x75 mm.
- After installing the VESA adapter, the position of the monitor must be readjusted to ensure proper
ergonomics.
⚠ CAUTION
Make sure that the device is switched off and disconnected from the power supply before
installation to avoid possible injury or damage.
1. Before First Use
Check the product carefully for possible transport damage and for the absence of accessories, such as
screws, which should be included in the scope of delivery.
⚠ CAUTION
Make sure that packaging materials and small screws and parts contained therein are
inaccessible to children to minimize the risk of choking and other risks.
2. Maintenance and Cleaning
2.1 Maintenance
- It is recommended to check every three months that all screws are still tight. Also, regularly check the
condition of all components of the product.
4
Assembly instructions
- Store the product in a cool and safe place, ideally at a maximum storage temperature of 40°C. For
additional safety, keep the product away from children and preferably in its original packaging.
- Avoid any vibrations and shocks so as not to affect the life and functionality of the product.
2.2 Cleaning
- No corrosive or hot cleaning agents should be used to clean the product. Likewise, wire brushes, metal
or other sharp materials are unsuitable for cleaning and should not be used.
- For gentle and effective cleaning, the use of a soft, damp cloth is recommended.
3. Waste Disposal
For the disposal of this product we recommend to contact the responsible local authorities or disposal
services. They can provide you with detailed information on available disposal options and recycling
centers in your area.
4. Manufacturer Information
3idee Technologies S.à r.l.
5 Um Lenster Bierg
L-6125 Junglinster
Luxembourg
5. Help and Feedback
If you need help with your article, we are here for you. We also appreciate any feedback.
https://help.3idee.eu/en/contact
5Assembly instructions
Assembly instruction
Step 1
Figure 1
Place your MSI monitor on a safe, soft surface to avoid
damaging it during installation.
Take the M4x20 screws (screw bag SP14) and attach the
VESA adapter to the back of your monitor using a
screwdriver. (Figure 1)
First loosely screw in all 4 screws and then gradually tighten
them.
Step 2
Figure 2
This is how the correctly mounted VESA adapter should look
on your monitor. Please check again if all screws are
tightened properly. (Figure 2)
Step 3
Figure 3
For this step we recommend a 2nd person.
Now lift the monitor and hold it to your monitor mount.
Fasten the VESA adapter with the 4 included M4x14 screws
(screw bag: SP2).
It is best to fasten 2 screws diagonally first, so that the
monitor cannot fall down and you can fasten the remaining
screws without any effort.
ATTENTION: Pay attention to the right screws!
(Figure 3)
Inhaltsverzeichnis
Andere 3idee Adapter Handbücher
3idee
3idee hp27-o VESA Adapter Bedienungsanleitung
3idee
3idee ao-u28v Bedienungsanleitung
3idee
3idee VESA de-2318us Bedienungsanleitung
3idee
3idee hp2xf-o Bedienungsanleitung
3idee
3idee smsng-s24d Bedienungsanleitung
3idee
3idee xia-27dm Bedienungsanleitung
3idee
3idee HP-HP24F Bedienungsanleitung
3idee
3idee acr-hy Bedienungsanleitung
3idee
3idee smsng-s24e Bedienungsanleitung
3idee
3idee Q-ew27 Bedienungsanleitung
3idee
3idee hp-s Bedienungsanleitung
3idee
3idee hp-m Bedienungsanleitung
3idee
3idee hpm-f Typ1 Bedienungsanleitung
3idee
3idee S2216M Bedienungsanleitung
3idee
3idee EX3203R Bedienungsanleitung
3idee
3idee acr-s24h Bedienungsanleitung
3idee
3idee acr-s24 Bedienungsanleitung
3idee
3idee vs-vx24 Bedienungsanleitung
3idee
3idee hp-32f Bedienungsanleitung
3idee
3idee smsng-g7 Bedienungsanleitung
