3M MS2 Sealant Box 4075-S Bedienungsanleitung

MS2™ Sealant Box 4075-S

Instructions

June 2006

78-8135-7044-3-A

278-8135-7044-3-A

1.0 General

Use the 3M™MS2™ Sealant Box 4075-S for moisture resistance and possible reentry applications. This

procedure can be used in fold-back and inline splices and may be applied either during or after the splicing

operation. The sealant box is designed for use with the 3M™MS2™ Super Mini Splicing Modules.

Note: Apply sealant box at ambient temperatures of 32˚F (0˚C) or above.

2.0 Components

Insertion tool: To be used with up to 12

sealant boxes.

Sealant boxes: Packaged with disposable

grease retainers and liners.

Insertion Tool

Sealant Box with

Liner and Retainer

3.0 Sealant Box Installation

3.01 Remove retainer.

3.02 Peel plastic liner away from the sealant.

Discard liner and retainer.

3.03 Insert module into 3M™MS2™ Sealant Box

4075-S and press into sealant as far as possible

with uniform force on each end.

78-8135-7044-3-A

3.04 Place insertion tool on sealant box and lift tool

wings to press module completely into sealant

box. Be sure triangular ribs on tool wings

engage both edges of module to press it into

the sealant box.

Note: The insertion tool must be used to insure

proper installation of the sealant box.

3.05 When module is completely pressed into

sealant box, green grease should be visible

coming out of all wire positions at back of

module.

3.06 Snap latches on ends of sealant box to lock

module into place.

3.07 Remove insertion tool and repeat procedure for

remaining modules.

4.0 Sealant Box Removal

4.01 To remove module from sealant box, release

end latches and remove molded protrusions

(see arrows at right) from base of box with

snips or sheath knife. Remove module.

Note: Sealant boxes must not be reused. If a sealant

box is removed, it must be replaced with a

new sealant box.

Note: Carefully follow health, safety, and

environmental instructions as given on

Material Safety Data Sheet.

3M and MS2are trademarks of 3M Company.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information

believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you

must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability

associated with such use. Any statements related to the product which are not contained in 3M’s current

publications, or any contrary statements contained on your purchase order shall have no force or effect unless

expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time

of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is

defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or

repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M

will not be liable for any indirect, special, incidental or consequential loss or damage arising from this

3M product, regardless of the legal theory asserted.

Communication Markets Division

3M Telecommunications

6801 River Place Blvd.

Austin, TX 78726-9000

800.426.8688

Fax 800.626.0329

www.3MTelecommunications.com Please recycle.

Litho in USA

Inhaltsverzeichnis

Andere 3M Kabel und Steckverbinder Handbücher

3M 5458A-IJ Bedienungsanleitung

3M 90-B1 Bedienungsanleitung

3M 7700 Series Betriebsanleitung

3M Cold Shrink QS-III Splicing Kit Bedienungsanleitung

3M 36110-3000 Series Bedienungsanleitung

3M SafeLok Anchorage 4011 Leitfaden

3M VF-45 Bedienungsanleitung

3M ECAM-20 MM-D Bedienungsanleitung

3M ECAM-27MM-D Bedienungsanleitung

3M 5321 Bedienungsanleitung

3M 3443-112 Montageanleitung

3M 4604 Bedienungsanleitung

3M Liqui-Cel MM 0.5x1 Series Handbuch

3M Cold Shrink QT-III 7620-S-INV-3G Series Bedienungsanleitung

3M TTS-5-1-OJ Benutzerhandbuch

3M 3104 Bedienungsanleitung

3M 4655 Bedienungsanleitung

3M 5811 Series Bedienungsanleitung

3M 8800-APC/AS/AGC Bedienungsanleitung

3M Fibrlok II 2539 Bedienungsanleitung

3M 8800 APC/AS Bedienungsanleitung

3M Scotchlok U1 Series Bedienungsanleitung

3M 7620-S-2 Bedienungsanleitung

3M 45116 Handbuch

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung