3M 8210Plus Bedienungsanleitung

8210Plus/

8210/8110S

Particulate Respirator N95

User Instructions

IMPORTANT: Keep these User Instructions for

reference

Respirateur N95 contre les particules

Directives d’utilisation

IMPORTANT : Conserver ces directives à titre de

référence .

Respirador de partículas N95

Instrucciones del usuario

IMPORTANTE: Conserve

estas

Instrucciones del

usuario para referencia.

This respirator contains no components made from natural rubber latex.

Ce respirateurest exempt de composants en latexdecaoutchouc naturel.

Este respirador no contiene componentes hechos de látex de

WARNING

This respiratorhelps protect againstcertain

particles. Misuse may result in sickness or

death. For properuse,seesupervisor, or User

Instructions, or call 3M in U.S.A., 1-800-247-3941. In Canada,call

TechnicalService at 1-800-267-4414.

MISE EN GARDE

Ce respirateur protègecontre certaines particules.

Une mauvaise utilisation peut causerdes

problèmes de santé ou la mort. Pourconnaître

l’utilisation adéquate de ce produit, consultersonsuperviseur, lireles

directives d’utilisation, ou appelez3Maux États-Unis au 1-800-247-3941.

Au Canada, appelezleservicetechnique au 1-800-267-4414.

ADVERTENCIA

Este respirador ayudaaprotegercontra ciertas

partículas. El malusopuede ocasionar

enfermedad o incluso la muerte.Para su uso

adecuado consulteasu supervisor, lea las Instrucciones o llame a 3M

en EUA al 1-800-247-3941. En Canadállame al Servicio Técnico al

1-800-267-4414. En Méxicollame al 01-800-712-0646. O contacte a

3M en su país

IMPORTANT

Before use, wearermustread and understand theseUser Instructions.

Keep these instructionsforreference.

Use For

Particlessuch as those fromgrinding,sanding, sweeping, sawing,

bagging, or processing minerals, coal, iron ore, ﬂour, metal, wood,

pollen,and certain other substances. Liquid or non-oil based particles

fromsprays that do notalsoemit oil aerosols or vapors. Follow all

applicablelocal regulations. For additional information on 3M use

recommendationsfor this class of respirator pleaseconsult the 3M

RespiratorSelection Guide found on the Personal Safety web site at

www.3M.com/PPESafetyorcall 1-800-243-4630 in U.S.A. In Canada,

call 1-800267-4414.

Do NotUse For

Do not use for gases and vapors,oil aerosols, asbestos, or

sandblasting; particulate concentrations that exceed either 10 times

theoccupationalexposurelimit or applicable governmentregulations,

whichever is lower. In the United States, do notusewhen the U.S.

Occupational SafetyandHealthAdministration (OSHA)substance

speciﬁcstandards, such as those for, arsenic, cadmium, lead in the

construction industry, or 4,4’-methylene dianiline (MDA), specifyother

types of respiratory protection.Thisrespiratordoes not supplyoxygen.

Biological Particles

This respiratorcanhelp reduce inhalation exposures to certain

airborne biologicalparticles (e.g. mold,Bacillus anthracis,

Mycobacterium tuberculosis, etc.) but cannot eliminate the risk of

contracting infection, illness or disease. OSHA and other government

agencies have not established safe exposure limitsforthese

contaminants.

Use Instructions

1. Failure to follow all instructions and limitations on the use of this

respirator and/or failure to wearthisrespirator during all times of

exposure can reduce respirator effectiveness andmay result in

sickness or death.

2. In theU.S., before occupationaluse ofthisrespirator, a written

respiratory protection program must be implemented meeting all

the requirements of OSHA 29 CFR 1910.134,such as training,

ﬁt testing, medical evaluation, and applicable OSHA substance

speciﬁcstandards. In Canada, CSA standard Z94.4 requirements

must be met and/or requirements of the applicable jurisdiction, as

appropriate. Follow all applicable local regulations.

3. Theparticles which canbedangerous to yourhealth include those

so small that youcannot seethem.

4. Leave the contaminated areaimmediately and contactsupervisor

if dizziness,irritation, or other distressoccurs.

5. Store therespirator awayfromcontaminatedareas when not

in use.

6. Inspect respiratorbefore each use to ensure that it is in good

operating condition. Examine all therespiratorparts for signs

of damage including the two headbands, attachment points,

nose foam,andnoseclip.Therespirator should be disposed of

immediately upon observation of damaged or missingparts.

Filtering facepieces are to be inspected prior to each use to

assure there are no holes in the breathing zone other than the

puncturesaround staplesand no damage hasoccurred.Enlarged

holesresultingfromripped or torn ﬁlter material around staple

punctures are considered damage.Immediately replace respirator

if damaged. Staple perforations do not affect NIOSH approval(For

8110S only).

7. Conduct a user sealcheck beforeeachuse as speciﬁedinthe

Fitting Instructionssection.If you cannot achieveaproper seal,

do not use the respirator.

8. Dispose of used product in accordance with applicableregulations.

Use Limitations

1. This respirator does notsupply oxygen. Do not use in atmospheres

containing lessthan19.5%oxygen.

2. Do notuse when concentrations of contaminants are immediately

dangerous to lifeandhealth,areunknown or when concentrations

exceed 10 timesthe permissible exposurelimit(PEL) or according

to speciﬁcOSHAstandards or applicable government regulations,

whichever is lower.

3. Do notalter, wash,abuse or misuse this respirator.

4. Do not use with beards or other facial hair or otherconditions that

prevent a goodsealbetween thefaceandthesealingsurface of

the respirator.

5. Respirators can help protect your lungs against certain airborne

contaminants. They will not prevententry through other routes

such as the skin, which would require additionalpersonal

protective equipment(PPE).

6. Thisrespirator is designed foroccupational/professional use by

adults who are properly trained in its use andlimitations. This

respirator is notdesignedtobeused by children.

7. Individuals withacompromisedrespiratory system,such as

asthma or emphysema, should consult a physician and must

complete a medical evaluation prior to use.

8. When stored in accordance with temperature and humidity

conditionsspeciﬁedbelow, theproduct may be useduntilthe “use

by” date speciﬁed on the packaging.

Storage Conditionsand ShelfLife

Beforeuse, store respirators in theoriginal packaging away from

contaminatedareas, dust, sunlight, extreme temperatures, excessive

moisture and damaging chemicals. When stored in accordance with

temperatureandhumidity conditions speciﬁed below, theproduct may

be useduntilthe“useby” date speciﬁed on packaging. Always inspect

product and conductauser sealcheck before use as speciﬁed in the

User Instructions. If you cannot achieveaproper seal, do not use

the respirator.

End of Shelf LifeUse

respirators before the“useby” date speciﬁed

on packaging

Storage TemperatureRange

Storage Maximum Relative Humidity <80% RH

+86˚F

+30˚C

-4˚F

-20˚C

<80%

Time Use Limitation

If respiratorbecomesdamaged,soiled or breathingbecomes difﬁcult,

leave thecontaminated areaimmediately and replacethe respirator.

Fitting Instructions

Must be followed each timerespirator is worn.

1. Prestretchtop and bottomstraps before placing respirator on the

face (8210 only) (Fig. 1).

2. Cup the respirator in your hand, with the nosepiece at your

ﬁngertips, allowing the headbands to hang freely below your

hand (Fig. 2).

3. Position therespirator underyourchinwiththenosepiece up.Pull

thetopstrap over your head resting it high at the topback of your

head. Pull the bottom strap over your headandposition it around

the neck below the ears (Fig.3).

4. Place yourﬁngertipsfrom both hands at thetopofthe metal

nosepiece.Using twohands, mold thenosearea to the shape of

your nose by pushing inwardwhilemoving your ﬁngertips down

both sides of the nosepiece (Fig. 4).

Pinching the nosepiece usingonehand may resultinimproper

ﬁt and less effective respiratorperformance. Usetwohands.

5. PerformaUser Seal Check prior to each wearing. To check the

respirator-to-faceseal,place both hands completely over the

respirator and exhale sharply. Be careful not to disturb the position

of the respirator. If air leaks aroundnose, readjustthenosepiece

as described in step 4. If air leaks at the respirator edges, workthe

straps back along the sides of yourhead (Fig.5).If you CANNOT

achieveaproperseal, DO NOT enter the contaminatedarea.

See your supervisor.

1 2 3 4 5

Removal Instructions

Seestep3of Fitting Instructionsand cup respirator in hand to

maintain positiononface. Pull bottom strap overhead.Stillholding

respirator in position, pull top strap overheadandremoverespirator.

REMARQUEIMPORTANTE :

Avant d’utiliser ce produit, l’utilisateur doit lire et comprendre ces

directivesd’utilisation. Conservezces directives d’utilisation aux ﬁns

de référence

Utiliser pour

Lesparticulesdégagées pendant le meulage, le ponçage, le balayage,

le sciage,l’ensachage ou le traitement des minéraux, du charbon,

du minerai de fer, de la farine, du métal, du bois, du pollen et de

certainesautressubstances.Les particulesliquides ou exemptes

d’huile provenant d’aérosols, mais ne dégageant pasd’huile ou de

vapeurs.Suivre lesréglementationslocales applicables. Pour obtenir

de plus amples renseignements sur les utilisationsrecommandées

par 3M pour ce type de respirateur, consulter le Guide de sélection

desrespirateurs de 3M qui se trouvesurlesite Web de la Division

desproduits de protection individuelle de 3Màl’adressesuivante :

www.3M.com/PPESafety ou appeler le1800 243-4630aux États-Unis

Au Canada, appeler le1800 267-4414.

Utilisations déconseillées

Ne pas utiliser pour les gaz, les vapeurs, les aérosols à base d’huile,

l’amiante ou le décapage au jet de sable, lesconcentrations de

particules 10 fois supérieuresàla limite d’exposition admissible

en milieudetravail ou auxlimites applicablesétabliespar le

gouvernement,selon la valeur la moins élevée.Aux États-Unis, ne

pasutiliserlorsque l’OccupationalSafetyandHealthAdministration

(OSHA) américaineades normes concernant des substances précises,

comme cellesconcernant l’arsenic, le cadmium, le plomb dans

l’industrie de la construction ou le diamino-4,4’ diphénylméthane

(MDA), recommandentd’autres types de protection respiratoire. Ce

respirateur ne fournitpasd’oxygène.

Andere Handbücher für 8210Plus

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere 3M Schutzvorrichtung Handbücher

3M DBI SALA EXOFIT NEX Bedienungsanleitung

3M PROTECTA Cobra Bedienungsanleitung

3M DBI Sala 3400800C Bedienungsanleitung

3M DBI-SALA Nano-Lok 3101521 Bedienerhandbuch

3M DBI SALA FLEXIGUARD Glyde-Saf HD System Bedienerhandbuch

3M Peltor Optime H510A Bedienungsanleitung

3M PELTOR Optime MT155H530A 380 Bedienungsanleitung

3M DBI-SALA Sealed-Blok 3400800 Bedienungsanleitung

3M WORKTUNES WIRELESS Bedienungsanleitung

3M DBI-SALA 3400862 Bedienungsanleitung

3M 4530 Bedienungsanleitung

3M Versaflo M Series Bedienungsanleitung

3M 1450 Bedienungsanleitung

3M 100 Series Bedienungsanleitung

3M DBI SALA SEALED-BLOK 3400944 Bedienungsanleitung

3M 1436 Bedienungsanleitung

3M Versaflo S Series Bedienungsanleitung

3M Pro-Protect Bedienungsanleitung

3M WORKTUNES WIRELESS Bedienungsanleitung

Beliebte Schutzvorrichtung Handbücher anderer Marken

Sola HD

Sola HD STV100K Series Bedienungsanleitung

socomec

socomec COUNTIS AMd Bedienungsanleitung

Kemo Electronic

Kemo Electronic M148-24 Bedienungsanleitung

SK ClickClick Bedienungsanleitung

Endress+Hauser

Endress+Hauser HAW569 Bedienungsanleitung

Ultrasonic

Ultrasonic SonicPRO Bedienungsanleitung

nxt

nxt BIA-nXt-DPC 1-22 Bedienungsanleitung

TFortis

TFortis SG-Switch Bedienungsanleitung

BERNINI DESIGN

BERNINI DESIGN Be172 Bedienungsanleitung

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYSET-3P-ESS-50-100 Bedienungsanleitung

E.K.T.

E.K.T. ke-DP01 Bedienungsanleitung

Siemens

Siemens SIPROTEC 7SD80 Bedienungsanleitung

cias

cias MICRO-RAY Bedienungsanleitung

Sungrow

Sungrow PVS-16MH Bedienungsanleitung

Reer

Reer 32010 Bedienungsanleitung

Tyco

Tyco ESFR-17 Bedienungsanleitung

Ross

Ross Opengear SRA-8901-R Bedienungsanleitung

GE Multilin 850 Bedienungsanleitung