A4Tech X-710 Bedienungsanleitung

User s Manual

Model(s): X-710 X-718

www.a4tech.com

SPEEDGameMouse

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO

CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Federal Communications Commission Requirements

The equipment has been tested and foundto complywith the limits for Class B Digital Device,pursuant to part15

ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergyand,ifnot installed

and used in accordance with theinstruction,maycause harmful interference to radio communication. However,

there is no guarantee that interference will notoccur ina particular installation. Ifthis equipment does cause harmful

interference to radio or television reception, whichcan be determined byturning the equipment offand on, theuser

is encouraged to tryto correct the interference byoneor more ofthe following measures:

lReorient ofrelocate the receiving antenna.

lIncrease the separation between the equipment and receiver.

lConnect theequipment intoan outlet on a circuit different fromthat to whichthereceiver is connected.

lConsult the dealer or an experienced radio/TV technician for help.

THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE

COULD VOID THE USER SAUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 oftheFCC Rules. Operation is subject to the following two conditions:

(1). this device maynot cause harmful interference, and

(2). this device must accept anyinterference received, including interference that maycause undesired operation.

HOW TO CONNECT YOUR MOUSE

1. Locate an available USB mouse port on the backof your computer.

2. Insert the USB mouse connector into the USB port .

If you like to use the PS2 port (for the round PS/2 plug), you will need to plug the

USB connector with a PS2 adapter.

HOW TO CHANGE THE DPI SETTING OF SPEED GAMEMOUSE

Clickthe button shown onthe right figure to quicklyshift

from 600-800-1200-1600-2000 DPI as the scroll wheel

changes color between shifts. You dont need anydriver

for this fabulous function!

MODEL: X-710

At Resolution:

Scrolling Wheel

will change to:

Recommend for: Suitable for Resolution of display

Recommend）

400DPI Non Slow-Speed andnormal accuracy player 640 480

600DPI Green Medium-Speed and required average accuracy player 800 600

800DPI Yellow Fast Speed and required aboveaverage accuracy player 1024 768

1000DPI Red High-Speed and required aboveaverage accuracy player 1152 864

Click6th keyto quicklyshift from 400, 600, 800 to 1000 DPI

MODEL: X-718

At Resolution:

Scrolling Wheel

will change to:

Recommend for: Suitable for Resolution of display

Recommend）

600DPI Non Slow-Speed andnormal accuracy player 800 600

800DPI Green Medium-Speed and required average accuracy player 1024 768

1200DPI Yellow Fast Speed and required aboveaverage accuracy player 1152 864

1600DPI Red High-Speed and required pinpoint accuracy player 1280 960

2000DPI Red & Yellow

coruscating

Extra High-Speed and required pinpoint accuracy player 1280 1024

Click 6th key to quicklyshift from 600, 800, 1200, 1600 to as high as 2000 DPI

STEPONE: HOW TOINSTALLSMART-X7 SOFTWARE

***** For Windows Me /2000 /2003 /XP

1. MUST: Please uninstall anyprevious mouse driver before installing the Smart-X7

2. MUST: Make sure you have completelyfinished setting upyour

mouse pad andmouse

3. Insert theincluded Compact Disc (CD) into your CD-ROM

4. Click “Install Driver”. Select model: X-710/718 Optical Mouse

5. Clickthe buttonon the right to install driver

6. Followthe on screen instruction to complete your installation

7. Restart your computerafter the driver has beeninstalled

8. You will see amouse icon “ ” appear on the bottomright

of your taskbar (near the clockarea)

9. Double clickon the mouse icon “ ” will bring you the mouse property(Image - Top: Mouse Properties Window)

10. Ifthe mouse image appears in themouse properties menu looksexactly thesameas the mouse on hand, then you

have successfullyinstalled the Smart-X7 driver

Mouse Properties Window

STEPTWO: HOW TO PROGRAMYOUR MOUSE BUTTONS

MOUSE PROPERTY

lOpen your MouseProperties.

First Tab: Button

Section I: Button Assignment

1. The mouse image that appears in the first section is a keyto numbers

listed to the right.For example, button #1 has been assigned as “Main

Button”bydefault andits not programmable.

2. The rest ofthe buttons from#2 to # 5are programmable.

Section II: Double-Click Speed Section III: Button Configuration

Adjust your double-clickspeed If you select “Left-Handed”,your

Main Buttonwill be#2 button.

Keyboard Property

Before wego further to setting up your mouse buttons with game commands,

we want tomake sure your keyboard properties has the character repeat

setting correct. Followthe steps belowto get toKeyboard Properties:

1) Go to Control Panel

2) Clickon Keyboard

3) For Repeat Delay:Most right (SHORT)

4) For Repeat Rate: Most right (FAST)

5) Apply>> OK

STEPTHREE: HOW TO SET X7-JUMP FUNCTION

( LEARN TO SIMULATE KEYBOARD S COMMANDS AND PROGRAMXYSENSITIVITYINDEPENDENTLY)

The function Smart-X7 not only provides program XY sensitivity

independently , but also can be set in any of the buttons from # 2 to

# 5 of simulation functions for the keyboard and half of the mouse

button simulation functions for the keyboard.

1. Double clickon the mouse icon “ ” will bring you the mouse

property. (image A)

2. One Clickon X7-Jump and you ll seethepop upwindow( image B)

Here you will see 2Parts:

lPart Oneis Change Mouse DPI.

lPart Two is Keystrokes.

Let s enjoyall the innovative features of the mousestep bystep as

follows :

image A

image B

Section I: Change Mouse DPI ：Set mouse XY axis sensitivitylevels

In order to Shift from pixel-precise targeting to fast-twitch maneuvers, without stopping the action. This

avoids the error in operation for more efficiency. You can configure your mouse as synchronism or

non-synchronism higher/lower with manyparameters to control the X/Ydpi byyourself in this smart X7

Software ,

Model At Resolution: LED of Scrolling Wheel Confirmable range of X/Y axes by software

400DPI Non 200DPI-400DPI

600DPI Green 200DPI-600DPI

800DPI Yellow 200DPI-800DPI

X-710

1000DPI Red 200DPI-1000DPI

600DPI Non 200DPI-600DPI

800DPI Green 200DPI-800DPI

1200DPI Yellow 200DPI-1200DPI

1600DPI Red 200DPI-1600DPI

X-718

2000DPI Red & Yellow coruscating 200DPI-2000DPI

If to cancel this mode, just clickthe 6th button ,it will automaticallychange to the next light status, if you need

the dpi amount prior to usage ,just click “Utilizemouse sensitivityconfiguration”mode and apply “”.

Section II: Keystrokes

ToADD keystrokes: Clickon the button “NewKeystroke”and youll see

a “Keystroke”Windowpopsup (Image: left, bottom)

Here youwill see 3 radio buttons:

lPress and hold will input keystrokes consecutively

lPress and hold will onlyinput oncethekeystrokes

lPress will input keystrokes consecutively,press again will release the

keystrokes

If you select the 1st radio button, it means youwould like to have the mouse

completelysimulate the keyboards keystroke –when you press and hold a

keyon the keyboard, it will input a character consecutively.

If you select the 2nd radio button, it means youwould like to have the mouse

partiallysimulatekeyboardskeystroke –when you press and hold a keyon

the keyboard, it will onlyinput onceunless youlift it and press it again.

If you choose the 3rd radio button, it means that you should have the mouse

buttonautomatically simulate the keyboardskeystroke –whenyoupress and

hold a keyon the keyboard, it will automaticallykeep inputting a character

unless youtype the mouse button assignedagain.

Let s do some example together…

Example 1: Select 1st Radio Button

1. Clickon “Record”(Reference: Image A)

2. Press “R”on the Keyboard

3. Click “OK”

4. It will bringyoubackto previous page

5. Nowclickon “Keystroke (R)”, the one youjust created

6. Select the Mouse Button (green icon) ontheMouse Image toyour right

to store the “Keystroke (R)”.

7. Green iconwill turn red once its beenselected. (ImageB)

8. Click “Apply”>> “OK”

We have stored it in Mouse Button # 2.

Let s tryit on regular word document or on game application (Counter

Strikes).

lTryit on Word Document. Press and hold your mouse button #3

Did you see the character “RRRRRRR”inputted consecutively?

lTryit on GameApplication.Press and hold your mouse button #

3.In Counter Strike, “Keystroke (R)”means to add bullets. Did

yousee it adding bullets? Ifyes, youhave successfully created a

command.

(Image A)

(Image B)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere A4Tech Maus Handbücher

A4Tech

A4Tech Wireless 1-Wheel Mouse Bedienungsanleitung

A4Tech

A4Tech G6-19 Bedienungsanleitung

A4Tech

A4Tech Bloody RT7 Bedienungsanleitung

A4Tech

A4Tech MeetingMan G10-700F Bedienungsanleitung

A4Tech

A4Tech G7-740NX Bedienungsanleitung

A4Tech

A4Tech G3-620F Bedienungsanleitung

A4Tech

A4Tech RFSOP-688 Bedienungsanleitung

A4Tech

A4Tech X-710BFS Bedienungsanleitung

A4Tech

A4Tech G7-540 Bedienungsanleitung

A4Tech

A4Tech G6-10 Bedienungsanleitung

A4Tech

A4Tech Office 8K Bedienungsanleitung

A4Tech

A4Tech G9-660 Bedienungsanleitung

A4Tech

A4Tech G9-500H Bedienungsanleitung

A4Tech

A4Tech N-400 Bedienungsanleitung

A4Tech

A4Tech G9-200F Bedienungsanleitung

A4Tech

A4Tech BT-630 Bedienungsanleitung

A4Tech

A4Tech G7-300 Bedienungsanleitung

A4Tech

A4Tech NB-50 Bedienungsanleitung

A4Tech

A4Tech XL-750BH Bedienungsanleitung

A4Tech

A4Tech RFSOP-54 Bedienungsanleitung

A4Tech

A4Tech GL-6630 Bedienungsanleitung

A4Tech

A4Tech N-600X Bedienungsanleitung

A4Tech

A4Tech G9-630 Bedienungsanleitung

A4Tech

A4Tech RBWM-70 Bedienungsanleitung

Beliebte Maus Handbücher anderer Marken

Sven

Sven RX-G720 Bedienungsanleitung

3DConnexion

3DConnexion CadMouse Pro Bedienungsanleitung

Canyon

Canyon Puncher GM-20 Bedienungsanleitung

Sharkoon

Sharkoon Light2 180 Bedienungsanleitung

Cherry

Cherry MW 8C ERGO Bedienungsanleitung

NGS

NGS HIT RB Bedienungsanleitung

Sharkoon

Sharkoon FireGlider Bedienungsanleitung

Lenovo

Lenovo Wireless Mouse N3902 Bedienungsanleitung

BASETech

BASETech BN-S11 Bedienungsanleitung

Dell

Dell WM326 Bedienungsanleitung

Areson

Areson B213 Bedienungsanleitung

HP M17587-371 Bedienungsanleitung

Chatpen

Chatpen CHA-30 Bedienungsanleitung

GAMDIAS

GAMDIAS DEMETER GMS5000 Bedienungsanleitung

HP KJ453AA - Wireless Laser Mouse Bedienungsanleitung

Trust

Trust GRAPHIN GXT 960 Bedienungsanleitung

Lenovo

Lenovo SD-9082 Bedienungsanleitung

Alienware

Alienware AW320M Bedienungsanleitung