Aaeon AOP-9150 Bedienungsanleitung

Operator Panel

A O P - 9150

AOP-9150

Intel®Atom N270 Processor

15” XGA 250 nits color TFT LCD

10/100/1000Base-TX Ethernet

4 COM/ 4 USB2.0/ 1 Parallel

1 VGA/ 1 DVI

AOP-9150 Manual 2nd Ed

February 2014

Operator Panel

A O P - 9150

This document is copyrighted, 2014. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, nor for

any infringements upon the rights of third parties, which may result

from its use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have

been made in the preparation of this document to assure its

accuracy, AAEON, assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information

contained herein.

AAEON reserves the right to make changes in the product design

without notice to its users.

Operator Panel

A O P - 9150

Acknowledgments

Award is a trademark of Award Software International, Inc.

VIA is a trademark of VIATechnologies, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Intel®and AtomTM are trademarks of Intel Corporation.

Microsoft Windows®is a registered trademark of Microsoft

Corporation.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

ESS is a trademark of ESS Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

SMI is a trademark of Silicon Motion, Inc.

Creative is a trademark of Creative Technology LTD.

All other product names or trademarks are properties of their

respective owners.

Operator Panel

A O P - 9150

iii

Packing List

Before you begin installing your card, please make sure that the

following materials have been shipped:

1 AOP-9150 Operator Panel PC

10 Mount brackets and screws

1 Power cord (Optional)

1 Transfer Board for CD-ROM

1 CD-ROM for manual (in PDF format) and drivers

If any of these items are missing or damaged, you should contact your

distributor or sales representative immediately.

1. Use a 3 V @ 200 mA lithium battery

2. Packing: please carry the unit with both hands,

handle with care

3. Maintenance: to properly maintain and clean the

surfaces, use only approved products or clean

with a dry applicator

4. Do not remove CompactFlash storage card

while reading from or writing into the storage

card.

Operator Panel

A O P - 9150

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from anyAC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

4. For plug-in equipment, the power outlet must be installed near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation.

Dropping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before

connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over voltage.

12. Never pour any liquid into an opening. This may cause fire or

electrical shock.

13. Never open the equipment. For safety reasons, the equipment

should be opened only by qualified service personnel.

Operator Panel

A O P - 9150

14. If one of the following situations arises, get the equipment

checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to

work according to the users manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS

BELOW -20°C (-4°F) OR ABOVE 60°C (140°F). IT MAY

DAMAGE THE EQUIPMENT.

16. Caution:

There is a danger of explosion if the battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by

the manufacturer. Dispose of used batteries according to the

manufacturer’s instructions and your local government’s recycling

or disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon

incorrecte. Ne la remplacer qu’avec le même modèle ou

équivalent recommandé par le constructeur. Recycler les

batteries usées en accord avec les instructions du fabricant et les

directives gouvernementales de recyclage.

DISCLAIMER: This set of instructions is given according to IEC

704-1. AAEON disclaims all responsibility for the accuracy of any

statements contained herein.

Operator Panel

A O P - 9150

Below Table for China RoHS Requirements

产品中有毒有害物质或元素名称及含量

AAEON Panel PC/ Workstation

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

外壳

○

中央处理器

与内存

○

硬盘

○

液晶模块

○

光驱

○

触控模块

○

电源

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Operator Panel

A O P - 9150

vii

Contents

Chapter 1 General Information

1.1 Introduction................................................................ 1-2

1.2 Feature......................................................................1-3

1.3 Specification..............................................................1-4

1.4 Dimension ................................................................. 1-7

Chapter 2 Hardware Installation

2.1 2.5”Hard Disk Drive (HDD) Installation ....................2-2

2.2 Panel Mounting ......................................................... 2-5

2.3 RS-232 PORT: COM1/COM3/COM4/COM5;

RS-232/422/485 PORT: COM2 (MALE) .........................2-7

2.4 VGA PORT (FEMALE)..............................................2-7

2.5 LAN0 & LAN1 PORT (FEMALE)............................... 2-7

2.6 USB2.0 PORT-USB0/1/2 (FEMALE) ........................ 2-8

Chapter 3 Award BIOS Setup

3.1 System Test and Initialization . .................................3-2

3.2 Award BIOS Setup....................................................3-3

Chapter 4 Driver Installation

4.1 Installation ................................................................. 4-3

Appendix A FAQ

A.1 FAQ........................................................................A-2

Operator Panel

A O P - 9150

Chapter 1 General Information 1-1

General

Information

Chapter

Operator Panel

A O P - 9150

Chapter 1 General Information 1-2

1.1 Introduction

AOP-9150 operator panel PC is a high performance solution

features all-in-one SBC with Intel®AtomTM N270 1.6 GHz processor.

That is designed to serve as a human machine interface (HMI) and

as a multimedia computer. It is a PC-based system with true-color

and wide-view-angle TFT LCD display. Onboard Ethernet controller,

multi-COM port interfaces, and DVI. In addition, its "fit anywhere"

design makes it very flexible and able to be used in many different

kinds of installations. It can be wall mounted, panel mounted or

stood upright on a desktop.

For system integrators, this simple, complete, compact and highly

integrated multimedia system let you easily build a panel PC into

your applications. Common industrial applications include factory

automation systems, precision machinery, and production process

control. It is also suitable for many non-industrial applications,

including interactive kiosk systems, entertainment management,

and car park automation. Our panel PC is a reliable, cost-effective

solution to your application's processing requirements.

Inhaltsverzeichnis

Andere Aaeon Touchscreen Handbücher

Aaeon

Aaeon AHP-1083 Bedienungsanleitung

Aaeon

Aaeon PFM-541I Bedienungsanleitung

Aaeon

Aaeon APC - 8152 Bedienungsanleitung

Aaeon

Aaeon POP-190 Bedienungsanleitung

Aaeon

Aaeon AMB-2000HT-E Series Bedienungsanleitung

Aaeon

Aaeon OMNI-5215-SKU Bedienungsanleitung

Aaeon

Aaeon AMB-551-D Bedienungsanleitung

Aaeon

Aaeon OMNI-2155 Bedienungsanleitung

Aaeon

Aaeon ACP-5215 Bedienungsanleitung

Aaeon

Aaeon ACP-5210 Bedienungsanleitung

Aaeon

Aaeon AHP-1122 Bedienungsanleitung

Aaeon

Aaeon AOP-8150WT Bedienungsanleitung

Aaeon

Aaeon OMNI-5155L Bedienungsanleitung

Aaeon

Aaeon AMB-2003 Series Bedienungsanleitung

Aaeon

Aaeon FOX-80 Bedienungsanleitung

Aaeon

Aaeon ACP-1103 Bedienungsanleitung

Aaeon

Aaeon ACP-5153 Bedienungsanleitung

Aaeon

Aaeon AOP-8150 Bedienungsanleitung

Aaeon

Aaeon AGD-317R Bedienungsanleitung

Aaeon

Aaeon ACP-1074 Bedienungsanleitung

Aaeon

Aaeon AOP-8060 Bedienungsanleitung

Aaeon

Aaeon FOX-81 Bedienungsanleitung

Aaeon

Aaeon OMNI-3155-UP Bedienungsanleitung

Aaeon

Aaeon FOX-151 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung