Advantech TPC-30 Series Bedienungsanleitung

TPC-30/32 Series

Intel PXA270

Touch Panel Computer

with 3.5" QVGA TFT LCD

User Manual

TPC-30/32 Series User Manual ii

The documentation and the software included with this product are copy-

righted 2008 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

This Manual Covers the Following Models:

• TPC-30 Series

• TPC-32 Series

• TPC-30T-E2AE

• TPC-32T-E2AE

Part No. 2003003021 1.2 Edition

Printed in Taiwan October 2008

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

TPC-30/32 Series User Manual iv

This product has passed the CE test for environmental specifications.

FCC Class A

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning.

Use a damp cloth. Do not use liquid/spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located

near the equipment and must be easily accessible.

5. Put this equipment on a reliable surface during installation. Drop-

ping it or letting it fall may cause damage.

6. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

7. Make sure the voltage of the power source is correct before con-

necting the equipment to the power outlet.

8. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

9. All cautions and warnings on the equipment should be noted.

10. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

11. Never pour any liquid into an opening. This may cause fire or elec-

trical shock.

12. Never open the equipment. For safety reasons, the equipment

should be opened only by qualified service personnel.

13. If one of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

14. Do not leave this equipment in an environment where the storage

temperature may go below -20° C (-4 °F) or above 70° C (158° F).

This could damage the equipment.

15. If one of the following situations arises, get the equipment checked

by service personnel:

a. The Power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment has not work well or you can not get it work

according to user‘s manual.

e. The equipment has dropped and damaged.

f. If the equipment has obvious sign of breakage

16. Never open the equipment. For safety reasons, only quali fied ser-

vice personnel should open the equipment.

17. CAUTION: The computer is provided with a battery-powered real-

time clock circuit. There is a danger of explosion if battery is incor-

rectly replaced. Replace only with same or equivalent type recom-

mended by the manufacture. Discard used batteries according to the

manufacturer’s instructions.

TPC-30/32 Series User Manual vi

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Ver-

wenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient

ein angefeuchtetes Tuch zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und

leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.

Ein Kippen oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät

vor überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen

nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBw-

erte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber

fallen kann.

10. Es sollte auch nichts auf der Leitung abgestellt werden. Alle Hin-

weise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten

Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan-

nung eine Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder

Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.

elektrischen Schlag auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der ele-

ktrischen Sicherheit nur von authorisiertem Servicepersonal geöff-

net werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz

zu trennen und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend

funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesse

vii

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

TPC-30/32 Series User Manual viii

Contents

Chapter 1 General Information ....................................... 2

1.1 Introduction ....................................................................... 2

1.2 Specifications .................................................................... 2

1.2.1 System Kernel ................................................................ 2

1.2.2 I/O Ports ......................................................................... 3

1.2.3 Storage ........................................................................... 3

1.2.4 Safety and Environment ................................................. 3

1.3 LCD Specifications ........................................................... 4

1.4 Touchscreen Specifications............................................... 4

1.5 Power................................................................................. 4

1.6 I/O Ports Arrangement ...................................................... 5

Figure 1.1:I/O Ports Arrangement ................................. 5

1.7 Panel Mounting ................................................................. 5

1.8 Dimensions and Cutout ..................................................... 6

Figure 1.2:Dimensions and Cutout ................................ 6

Chapter 2 System Setup.................................................... 8

Figure 2.1:Power Connector and Power Lines .............. 8

Figure 2.2:Pin Assignment on the Power Receptor ....... 8

Figure 2.3:Power Line into the Power Receptor ............ 9

Chapter 3 System Tuning ............................................... 12

3.1 LCD Tuning .................................................................... 12

Figure 3.1:Display ....................................................... 12

Figure 3.2:Display Properties ...................................... 12

3.2 Touchscreen Calibration ................................................. 13

Figure 3.3:Style ............................................................ 13

Figure 3.4:Stylus Properties ......................................... 13

Figure 3.5:Touchscreen Calibration ............................ 14

3.3 Buzzer Setting ................................................................. 14

Figure 3.6:Volume & Sounds Setttings 1 .................... 14

Figure 3.7:Volume & Sounds Setttings 2 .................... 14

Chapter 4 Windows CE .................................................. 18

Figure 4.1:Windows CE on TPC-30/32 ....................... 18

4.1 TPC Utilities.................................................................... 19

4.1.1 Soft-Keyboard .............................................................. 19

Figure 4.2:Soft-Keyboard ............................................ 19

4.1.2 TPC Configuration ....................................................... 19

Figure 4.3:TPC Configurator ....................................... 19

Figure 4.4:General ....................................................... 20

Figure 4.5:Network ...................................................... 20

Figure 4.6:Advanced Network ..................................... 21

Figure 4.7:Watchdog Setting ....................................... 21

Figure 4.8:Misc Page ................................................... 22

TPC-30/32 Series User Manual x

Figure 4.9:Reboot Machine ......................................... 23

Figure 4.10:Registry Saving Success ........................... 24

Figure 4.11:Registry Editor ......................................... 24

4.1.3 Advantech Tools .......................................................... 25

Figure 4.12:Advantech Tools ...................................... 25

Figure 4.13:Remote Display Host Application ............ 26

Figure 4.14:Remote Display Application .................... 27

Figure 4.15:Connect .................................................... 27

Figure 4.16:Remote Display Host Application ............ 28

Figure 4.17: NotepadPlus ............................................ 28

Figure 4.18:TPC Version Information ......................... 29

4.1.4 Other Utilities .............................................................. 29

4.2 Networking...................................................................... 30

4.2.1 Network via Ethernet ................................................... 30

Figure 4.19:Network and Dial-up Connections ........... 30

Figure 4.20:Selected Connection ................................. 31

Figure 4.21:Setting IP Address .................................... 31

Figure 4.22:Setting Name Servers ............................... 32

Figure 4.23:Save Registry ............................................ 32

4.2.2 Network via Serial Port ................................................ 33

Figure 4.24:PC Connection .......................................... 33

Figure 4.25:PC Connection Properties ........................ 34

Figure 4.26:Change Connection .................................. 34

Figure 4.27:Change Connection .................................. 35

Figure 4.28:COM1 Set ................................................. 35

Figure 4.29:Microsoft ActiveSync .............................. 36

Figure 4.30:Select Connection Setting ........................ 36

Figure 4.31:Configure Connection Setting .................. 37

Figure 4.32:Get Connected .......................................... 37

Figure 4.33:Run Repllog.exe on the TPC .................... 38

Figure 4.34:Connection on the TPC ............................ 38

Figure 4.35:Connection on the Host PC ...................... 38

Figure 4.36:Explore the TPC ....................................... 39

4.3 Application Program Development................................. 39

4.3.1 System Requirements for Developers .......................... 39

4.3.2 Building Windows CE Runtime .................................. 40

Figure 4.37:Starting a New Project .............................. 41

Figure 4.38:Selecting ................................................... 41

Figure 4.39:Compiling Your Program ......................... 42

Appendix A Watchdog Timer Programming................... 44

A.1 DeviceIOControl ............................................................. 44

A.2 How to Use the Control Code ......................................... 46

A.2.1 IOCTL _WDT_ENABLE: ........................................... 46

A.2.2 IOCTL _WDT_DISABLE: .......................................... 46

A.2.3 IOCTL_WDT_STROBE: ............................................ 46

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech Touchscreen Handbücher

Advantech

Advantech ITA-8100 Bedienungsanleitung

Advantech

Advantech PPC-154 Bedienungsanleitung

Advantech

Advantech COASTIPC PPC-412 Installations- und Betriebshandbuch

Advantech

Advantech PPC-L61T Bedienungsanleitung

Advantech

Advantech TPC-1251T-Exxx Series Bedienungsanleitung

Advantech

Advantech IPPC-7158 Series Bedienungsanleitung

Advantech

Advantech TPC-B300 Series Bedienungsanleitung

Advantech

Advantech PPC-4211W Bedienungsanleitung

Advantech

Advantech PPC-3120-RE9A Montageanleitung

Advantech

Advantech POC-W211 Gebrauchsanweisung

Advantech

Advantech PPC-3151-650AE Installations- und Betriebshandbuch

Advantech

Advantech PPC-155T Bedienungsanleitung

Advantech

Advantech PPC-L126 Bedienungsanleitung

Advantech

Advantech PPC-S154T Bedienungsanleitung

Advantech

Advantech PPC-306 EHL Installations- und Betriebshandbuch

Advantech

Advantech PPC-306 EHL Bedienungsanleitung

Advantech

Advantech TPC-2000 Series Bedienungsanleitung

Advantech

Advantech IPPC-6152F Series Bedienungsanleitung

Advantech

Advantech Intel XScale PXA Touch Panel Computer TPC-66... Bedienungsanleitung

Advantech

Advantech TPC-870 Bedienungsanleitung

Advantech

Advantech PPC-105 Bedienungsanleitung

Advantech

Advantech PPC-150 Series Bedienungsanleitung

Advantech

Advantech PPC-415 Installations- und Betriebshandbuch

Advantech

Advantech PPC-318W Installations- und Betriebshandbuch

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung