A&D UA-702 Bedienungsanleitung

Digital Blood Pressure Monitor

Model UA-702

Instruction Manual

Manuel d’instructions

Manual de Instrucciones

Manuale di Istruzioni

UA-702EX-CU4-5658D

ENGLISH 1

ENGLISH

Dear Customers

Congratulations. You have purchased an A&D blood pressure monitor, one of

the most technologically advanced, yet easy to use products available in the

marketplace today.

We strongly recommend you read this instruction manual carefully prior to using

it the first time.

General Information

This device conforms to the European Directive 93/42/EEC for Medical

Products.This is evidenced by the CE mark of conformity accompanied by the

reference number of a designated authority.

This device is designed for monitoring your blood pressure and pulse rate at

home. Therefore, intended use of this device is limited to monitoring blood

pressure and pulse for the general public, except newborns and infants.

Note

1. This device is designed for personal use and not for public use.

2. This device is not designed for measuring newborns or infants. Using this

device on newborns and infants could cause injury to the child. DO NOT

USE on newborns or infants.

Precautions

1. Precision components were used in the

construction of this device. Extremes in

temperature, humidity, direct sunlight, shock

or dust should be avoided.

2. Clean the device with a dry, soft cloth. Never

use thinner, alcohol, benzine, or wet dusters.

3. Avoid folding the cuff tightly or storing the

hose tightly twisted for long periods, as such

treatment may shorten the life of the

components.

4. The device and cuff are not water resistant. Protect the device and cuff from

rain, sweat and water.

5. Measurements may be impaired if the device is used close to televisions,

microwave ovens, cellular telephones, X-ray or other devices with strong

electrical fields.

6. Used equipment, parts and batteries are not treated as ordinary household

waste, and must be disposed of according to the applicable regulations

ENGLISH 2

Parts Identification

Symbols

ENGLISH 3

Symbols Function / Meaning Treatment

Turns the device on and off.___________

Guide to install battery ___________

Direct current ___________

SN Serial number ___________

Date of manufacture ___________

Type BF: Device, cuff and tubing

are designed to provide special

protection against electrical

shocks. ___________

Appears when measurement is in

progress and flashes when the

pulse is detected. Measurement is in progress -

-remain still.

Flashes when there is air

remaining in the cuff at power up.

Flashes at the completion of the

measurement until exhaust is

complete.

Press the exhaust valve

button to exhaust the air.

The pulse is detected immediately

after the measurement has begun. Increase pressurization by 30

to 40 mmHg and measure

again.

Appears when the battery voltage

is too low for the device to work

properly. Replace all batteries with

new ones.

Appears when the blood pressure

can not be measured accurately.

First exhaust the air from the

cuff, then re-apply the cuff

properly and measure again.

Appears when the pulse is not

detected correctly. First exhaust the air from the

cuff, then re-apply the cuff

properly and measure again.

Flashing

exhaust

velosity

The exhaust rate is greater than 8

mmHg/s. Adjust the exhaust rate to 2

to 5 mmHg/s.

The medical device label by the

EC directive ___________

Registered with the Australian

Communication Authority by the

Trademarks office. ___________

ENGLISH 4

Using the Monitor

1. Installing / changing the batteries

Remove the battery cover and insert new batteries into the battery

compartment as shown, taking care that the polarities (+) and (-) are observed.

Use only R6P, LR6, AA or similar type batteries.

•Insert the batteries as shown in the battery compartment. If not, the device

will not work.

•When (LOW BATTERY mark) appears in the display, replace all

batteries with new ones at the same time. Do not mix old and new batteries.

It may shorten the battery life, or cause the device to malfunction.

• (LOW BATTERY mark) does not appear when the batteries are drained.

•Battery life varies with the ambient temperature and may be shorter at low

temperatures.

•Remove the batteries if the device is not to be used for a long period of time.

The batteries may leak and cause a malfunction.

•Use the specified batteries only. The batteries provided with the device are

for testing monitor performance and may have a shorter life.

2. Connecting the air hose

Insert the air connector plug into the air socket firmly.

ENGLISH 5

Using the Monitor

3. Attaching the arm cuff

Wrap the cuff around the upper arm,about

2-3 cm above the elbow,as shown. Place

the cuff directly against the skin, as clothing

may cause a faint pulse, and result in a

measurement error.

Constriction of the upper arm,caused by

rolling up a shirt sleeve,may prevent

accurate readings.

4. How to take proper measurements

For the most accurate blood pressure measurement:

• Sit comfortably at a table. Rest your arm on the table.

• Relax for about five to ten minutes before measurement.

• Place the center of the cuff at the same height as your heart.

• Remain still and keep quiet during measurement.

• Do not measure right after physical exercise or a bath.

Rest twenty or thirty minutes before taking the measurement.

• Try to measure your blood pressure at the same timeevery day.

5. Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be

alarmed).

6. After measurement

After measurement, press the POWER button to turn off the power.

Remove the cuff and record your data.

Note

The device has an automatic power shut-off function,which turnsoff the power

automatically three minutesafter measurement.

Allow at least ten minutes between measurements on the same person.

ENGLISH 6

Measurements

1. Place the cuff on the arm (preferably the left arm).

2. Press the POWER button.

•When the POWER button is pressed, all of the display symbols will

appear for about one second.

•When the " 0 " is flashing, the device is ready for measurement. If the

mark appears, the cuff has some air trapped in it. Press the exhaust

valve button until "0" appears.

3. Pressurize the cuff by squeezing the rubber bulb.

•Inflate the cuff to 30-40 mmHg higher than your normal systolic value.

The figure on the left of the display shows the current pressure as you

inflate the cuff.

•A buzzer sounds when pressure reaches 160, 200, 240 and 280 mmHg.

4. When pressurization is complete, the automatic exhaust mechanism will

gradually reduce the pressure in the cuff and the mark will appear along

with the current pressure reading on the left and exhaust rate on the right.

•The measurement will not be accurate if the exhaust rate is outside of the

2 to 5 mmHg range.

•Remain still during the measurement. When a pulse is detected, the

mark will flash in unison with the pulse of the person being monitored and

the pressure display will switch to the right side. When the measurement

starts, the buzzer will sound at each pulse.

ENGLISH 7

Measurements

5. When the measurement is complete,the buzzer soundsfor about one second.

The systolic pressure is displayed on the left and the diastolic is displayed on the

right. The pulse alternates with the systolic and diastolic displays.

6. Press the exhaust valve button to completely release the air from the cuff.

•When a measurement is made with insufficient pressure, the mark will

appear. Re-pressurize the cuff to a pressure that is about 30 to 40 mmHg

higher than the previous time.

•When a measurement is made with an erratic pulse or in a very noisy

environment, will appear.

7.Turning the power off

Press the POWER button to turn the power off. The device will be instandby mode.

8. Subsequent measurements

If a subsequent measurement is required, turn off the power and turn it on

again. When the "0 " appears, the device is ready for another measurement.

Note

Allow at least ten minutes between measurements on the same person.

9. Automatic power-off function

If the device is left on after a measurement, it will turn off automatically after about

three minutes.It may be turned off at any time by pressing the POWER button.

ENGLISH 8

Measurements

Notes for proper measurement

Sit in a comfortable position. Place the arm to be used for the measurement on a

table or other support so that the center of the cuff will be at the same height as

your heart.

•Relax for about five or ten minutes before starting a measurement. If you

are excited or depressed by emotional stress, the measurement will reflect

this stress as a higher (or lower) than normal blood pressure reading and

the pulse reading will usually be faster than normal.

•An individual’sblood pressure varies constantly, depending on what you

are doing and what you have eaten. What you drink can have a very

strong and rapid effect on your blood pressure.

•This device bases its measurements on the heart beat. If you have a very

weak or irregular heart beat, the device may have difficulty determining

your blood pressure.

•Should the device detect a condition that is abnormal, it will stop the

measurement and display an error symbol. See the section on the

descriptionsof display symbols for details.

•This blood pressure device is intended for use by adults only. Consult with

your physician before using this device on a child. A child should not use

this device unattended.

ENGLISH 9

About Blood Pressure

1. What is blood pressure?

Blood pressure is the force exerted by blood against the walls of the arteries.

Systolic pressure occurs when the heart contracts. Diastolic pressure occurs

when the heart expands.

Blood pressure is measured in millimeters of mercury (mmHg). One's natural

blood pressure is represented by the fundamental pressure, which is measured

first thing in the morning while one is still at rest and before taking food or drink.

2. What is hypertension and how is it controlled?

Hypertension is abnormally high blood pressure.If left unattended, it can cause

many health problems including stroke and heart attack.

Hypertension can be controlled by altering lifestyle, avoiding stress and with

medication under a doctor’s supervision.

To help prevent hypertension or keep it under control:

•Do not smoke.

•Reduce salt and fat intake.

•Maintain proper weight.

•Exercise regularly.

•Have regular physical checkups.

3. Why measure blood pressure at home?

Blood pressure measured at a clinic or doctor's office may cause apprehension

or fear and can produce an elevated reading, 25 to 30 mmHg higher than that

measured at home. Home measurement reduces the effects of outside

influences on blood pressure readings, supplements the doctor's readings and

provides a more accurate, complete blood pressure history.

Inhaltsverzeichnis

Sprachen:

Andere A&D Blutdruckmessgerät Handbücher

A&D

A&D UA-705 Bedienungsanleitung

A&D

A&D ESSENTIAL UB-525 Bedienungsanleitung

A&D

A&D UB-543 Bedienungsanleitung

A&D

A&D UA-1030T Bedienungsanleitung

A&D

A&D UA-853 Bedienungsanleitung

A&D

A&D ESSENTIAL UB-525 Bedienungsanleitung

A&D

A&D UB-510 Kurzanleitung

A&D

A&D UA-774 Bedienungsanleitung

A&D

A&D UB-512 Bedienungsanleitung

A&D

A&D TM-2441 Bedienungsanleitung

A&D

A&D UB-510 Bedienungsanleitung

A&D

A&D UB-351 Bedienungsanleitung

A&D

A&D UB-543 Bedienungsanleitung

A&D

A&D UA-767 Bedienungsanleitung

A&D

A&D UM-102 Bedienungsanleitung

A&D

A&D UB-543 Bedienungsanleitung

A&D

A&D Life Source UB-525CN Bedienungsanleitung

A&D

A&D UA-1200BLE Bedienungsanleitung

A&D

A&D TM-2657P Bedienungsanleitung

A&D

A&D UA-631V Bedienungsanleitung

A&D

A&D UB-511 Bedienungsanleitung

A&D

A&D UA-767PBT-C Betriebsanleitung

A&D

A&D UA-851 Bedienungsanleitung

A&D

A&D UA-787 Plus Bedienungs- und Wartungshandbuch

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung