Braun VitalScan 1 Bedienungsanleitung

BPW200AR

BPW220AR

VitalScan®1

VitalScan®3

This product is manufactured for

Kaz Europe Sàrl under a license to the‘Braun’

trademark.‘Braun’is a registered trademark

of Braun GmbH, Kronberg , Germany.

Este producto es fabricado para Kaz Europe

Sàrl bajo licencia de la marca registrada‘Braun’.

‘Braun’es una marca registrada de Braun

GmbH, Kronberg, Alemania.

Este produto é fabricado para Kaz Europe Sàrl

baixo licença da marca“Braun”.“Braun”é

marca registrada da empresa Braun GmbH,

Kronberg, Alemanha.

English................................ 2

Español.............................19

VitalScan 3

F G

VitalScan1

A000525R0

09AUG16

ARGENTINA:

Importa, distribuye y garantiza: Newsan S.A.

Roque Pérez 3650 - C.A.B.A. - Argentina (C1430FBX)

Teléfono: 0810-444-1236

Producto autorizado por la ANMAT: PM-2270-1

DirectorTécnico: Farm. Mauricio Rittiner - MP19592

Condición deVenta:VENTA LIBRE

Contenido de la caja: 1Tensiómetro clínico digital

BRAUN modelo BPW200AR, BPW220AR, 1 manual

de usuario en castellano con instrucciones de uso,

precauciones y advertencias, 1 hoja de garantía.

Hecho en China.

Características eléctricas:

3 V 1.8 W 2 Baterías AAA de

1.5 V c/u

Manufacturer:

Kaz Europe Sàrl

Place Chauderon 18

CH-1003 Lausanne

Switzerland

Made in China.

Hecho en China.

Fabricado na China.

BPW200AR/BPW220AR

Manufacturado en China por ONBO Electronic

(Shenzhen) Co., Ltd., No. 497,Ta Laneg Nan Road,Ta

Laneg Street, Baoan District , Shenzhen, China para

Kaz Europe Sàrl, Place Chauderon 18 CH-1003

Lausanne, Suiza.

Manufactured in China by ONBO Electronic

(Shenzhen) Co., Ltd., No. 497,Ta Laneg Nan Road,Ta

Laneg Street, Baoan District , Shenzhen, China for

Kaz Europe Sàrl, Place Chauderon 18 CH-1003

Lausanne, Switzerland.

Intended use of BraunVitalScan 1 andVitalScan 3

BraunVitalScan 1 /VitalScan 3 are blood pressure monitors that have been

developed for easy and accurate blood pressure measurements from the wrist.The

measuring accuracy of Braun VitalScan 1 and VitalScan 3 were tested at the time of

manufacture and were proven by clinical research in accordance with AAMI/ANSI-SP10,

and also passed ESH clinical validation.

What youshould know about blood pressure

Blood pressure constantly changes throughout the day. It rises sharply in the early

morning and declines during the late morning. Blood pressure rises again in the

afternoon and ﬁnally drops to a low level at night. Also, it may vary in a short period of

time.Therefore, readings from successive measurements can ﬂuctuate.

SYS

mmHG

140

120

100

6 5 h12 18 0

DIA

mmHG

Note: Blood pressure readings from a healthy 31-year old male, measured at 5-minute intervals

GB English

Blood pressure measured in a doctor’s oﬃce only provides a momentary value.

Repeated measurements at home better reﬂect one’s actual blood pressure values

under everyday conditions.

Moreover, many people have a diﬀerent blood pressure when they measure at home,

because they tend to be more relaxed than when in the doctor’s oﬃce.

Regular blood pressure measurements taken at home can provide your doctor with

valuable information on your normal blood pressure values under actual everyday

conditions.

TheWorld Health Organization (WHO) has set up the following standard blood pressure

values when measured at resting pulse:

Blood

pressure (mmHg)

Normal values Mild hypertension Severe

hypertension

SYS = systole

= upper value

DIA = diastole

= lower value

up to 140

up to 90

140 – 180

90 – 110

over 180

over 110

Safety information and important precautions

•To ensure accurate measuring results, carefully read the complete

use instructions.

•This product is intended for household use only. Keep product and

batteries away from children.

•People suﬀering from cardiac arrhythmia, vascular constriction,

arteriosclerosis in extremities, diabetes or users of cardiac pacemakers

should consult their doctor before measuring their blood pressure

themselves, since deviations in blood pressure values may occur

in such cases.

•If you are under medical treatment or taking any medication, please

consult your doctor ﬁrst.

•The use of this blood pressure monitor is not intended as a substitute

for consultation with your doctor.

2. The display will then show D-M and the month number will ﬂash.You can advance

the month by pressing the button.To set, press the button.

3. Next, the day number will ﬂash and you can press the button to advance

the days.To set the day press the button.

4. Then, the time icon will automatically appear and the hour number ﬂashes.

Advance the hour by pushing the button.To set the hour press the button.

5. Last, the minute number will ﬂash, and you can press the button to advance

the minutes.To set the minutes press the button.

6. To complete, exit the time/date setting mode by pushing the button. If you

want to change the time or date at anytime, press and hold the time/date

button for 3 seconds and begin the process as described above.

Note: Time and date will be lost when changing batteries.

Viewing time and date

The display will always display the time.To view

the date, just press the time / date button .

The date will display for 3 seconds and then revert

back to displaying the time.

Product description

•Display

Memory button

Time/date button (not available on the VitalScan1)

Power (start/stop) button

Cu

Battery compartment cover

Battery compartment

1 2 3

4 5 6

Inserting batteries

•Use alkaline batteries, type AAA 1.5V.

•Remove the battery compartment cover and insert

two batteries with correct polarity (see symbol in the

battery compartment).

•New batteries will provide approximately

200 measurements.

•Only discard empty batteries.They should not

be disposed of in the household waste, but at appropriate collection

sites or at your retailer.

Time and date (only forVitalScan 3)

Setting time and date

1. After new batteries have been installed, the year number ﬂashes at bottom of

display. Advance the year by pressing button.To set, press the button.

2 cm

1 2

4 5 6

Key rules for accurate blood pressure measurement

•Always take readings at the same time of day, ideally in the morning, under the same

conditions.

•Do not measure within 30 minutes after smoking, coﬀee, tea consumption or any

form of exertion.These factors will inﬂuence the measurement results.

•Always measure on the same wrist (normally left).

•Take oﬀ wrist watch and jewelry before ﬁtting the monitor on the measuring arm.

•Wait approximately 3 minutes before repeating a measurement.

Taking a measurement

1. While taking a measurement, sit down, relax, keep still, especially the

hand of the measuring arm (normally left), do not move or speak.

2. Fasten the monitor on the PALM side of your wrist, roughly 2 cm below

the palm line. DO NOT ATTACH LIKE AWRISTWATCH. Make sure that

the cuﬀ ﬁts tightly. See Cu tting on page 10.

3. Hold the monitor AT THE HEART LEVEL, as on the examples below.

Do not let arm fall below heart level.

4. Press power button to begin.The measurement starts automatically.While

measurement is in progress, do not move or speak.

Note: If necessary to interrupt a measurement, press the at any time. The device

immediately cancels the measurement, lowers cu pressure and enters sleep mode.

5. The cuﬀ will ﬁrst inﬂate and then deﬂate. At the end of the measurement a ﬁnal

beep sounds and the reading is displayed:

Upper (systolic) value

Lower (diastolic) value

Pulse

6. Press the power button to turn the product oﬀ. Otherwise the product will

turn oﬀ automatically after 1 minute. If at any time, you want to stop the

measurement, press the power button .

7. Tests results will be saved into the memories automatically ( see Average &

memory functions below). If you don’t want store the data, press and hold the

power button 5 seconds until the M icon is ﬂashing, then press the memory

button to conﬁrm operation.

Irregular heartbeat detection (only for VitalScan 3)

This symbol indicates that certain pulse irregularities were

detected during the measurement. In this case, the result may

deviate from your normal basal blood pressure – repeat the

measurement. In most cases, this is no cause for concern. However,

if the symbol appears on a regular basis (e.g. several times a week

with measurements taken daily), we advise you to tell your doctor.

CAUTION: An irregular heartbeat can be a serious medical condition

requiring medical attention.We recommend contacting your physician

if you see this icon frequently.

1 2

7 Sec.

1 2 3

Average & memory functions

Your VitalScan 3 blood pressure monitor will automatically store 90 measurements

(VitalScan 1 model: 10 measurements). Storing is done automatically after each

completed measurement.The memory is nonvolatile.This means that you will not lose

stored data when changing batteries. However, the memory can be cleared manually.

See Deleting all measurements on page 9.

TheVitalScan 3 model features an Average function to display the average

reading of the last three measurements.

Note: Average readings feature is NOT available in the VitalScan 1 model.

Recalling average readings (VitalScan 3 only)

1. To recall average readings, press button.

The average of the 3 last readings will display

along with average icon .

2. To exit, turn device oﬀ by pressing button.

Recalling stored readings (VitalScan 1 andVitalScan 3)

1. Press memory button once for average of existing memories (this step is for

VitalScan 3 only. See Recalling average readings above.)Then press button

again. Memory icon will appear and a number will brieﬂy appear in the

pulse ﬁeld.This number indicates which memory is being recalled.Then, the

recalled measurement will display.

2. Repeatedly pressing the button will call up one by one all stored readings.

The number of the memory will appear ﬁrst, followed by the measurement.

3. To exit the memory mode, press the button.

Deleting all measurements

IMPORTANT: Before proceeding to clear all the memory, make sure you don’t have

to make reference to the readings in the future.

1. In shut o mode, press button for at least 7 seconds until CL appears

in display.

2. When you release the button, CL will ﬂash.

3. Press the button one more time and 3 short beeps will sound, CL will

disappear which indicates all stored readings have been deleted.

Battery charge indicator

Batteries almost discharged

When the batteries are approximately 75% used the

battery symbol will ﬂash. The monitor will continue to

measure reliably, but new batteries should be obtained.

Batteries discharged—replacements required

!When the batteries are dead, the battery symbol

will ﬂash empty, display will go blank and 3 beeps will

sound.You cannot take any further measurements

and must replace the batteries.

10 11

Replace batteries

1. Open the battery compartment on the left side by

pulling battery door down.

2. Replace the batteries – ensure they are

correctly connected, as shown on the symbols

in the compartment.

3. All saved memories are retained although date and

time must be reset—the year number therefore ﬂashes

automatically after the batteries are replaced.

To set time and date, follow the procedure described

in Time and date on page 4.

2 cm

Storage and cleaning

•Do not expose device to either extreme temperatures,

humidity, dust or direct sunlight.

•The cuﬀ contains a sensitive air-tight bubble.

Handle this carefully and avoid all types of straining

through twisting or buckling.

•Clean the product with a soft, slightly damp cloth.

Stains on the cuﬀ can be carefully removed with a

damp cloth. Do not use gasoline, thinners or similar

solvents. Do not wash or dry clean the cuﬀ. Do not

store the product in a place exposed to direct sunlight

or high humidity.

•Do not drop the device or treat it roughly in any way.

Avoid strong vibrations.

•NEVER open the device!This will make the

manufacturers warranty invalid!

Cuff fitting

1. Remove all objects and jewelry from the wrist

(e.g. wristwatch, bracelet, etc.) Put the cuﬀ over the

wrist in with the monitor face on the INSIDE of wrist.

2. The distance between the cuﬀ and the hand

should be approximately 2 cm (1/2”).

3. Secure the cuﬀ with theVelcro fastener, so that it

lies comfortably and not too tight. No space should

remain between the cuﬀ and the wrist.

Calibration

This product has been calibrated at the time of manufacture. If used according to

the use instructions, periodic recalibration is not required. If at any time, you

question the measuring accuracy, please contact an authorized Service Centre .

12 13

* If this or any other problem occurs repeatedly, please consult your doctor.

Error Description Potential cause and remedy

«Hi» Pulse or cuﬀ pressure

too high The pressure in the cuﬀ is too high (over

300 mmHg) OR the pulse is too high

(over 200 beats per minute). Relax for 5

minutes and repeat the measurement*.

«LO» Pulse too low The pulse is too low (less than 40 beats

per minute). Repeat the measurement*.

Readings from repeated

measurements diﬀer

considerably.

Blood pressure is a

ﬂuctuating value.

For healthy adults, deviations

of 10 to 20 mmHg are

possible.

none

Cuﬀ is not

properly ﬁtted. Ensure that the monitor is

ﬁtted as follows:

- on the palm side of your wrist

- approx. 2 cm away from

palm line

Readings were not

consistently taken at heart

level.

For each measurement, hold the

monitor at heart level.

Talking, coughing, laughing,

moving etc. when measuring

will inﬂuence the reading.

While measuring, relax, keep still, do not

move or speak.

Error Description Potential cause and remedy

Batteries are low Insert new batteries

Batteries are dead Insert new batteries

«ERR 1» Signal too weak The pulse signals on the cuﬀ are too weak.

Re-position the cuﬀ and repeat the

measurement.*

«ERR 2» Error signal During the measurement, error signals were

detected by the cuﬀ, caused for instance by

movement or muscle tension. Repeat the

measurement, keeping the arm still.

«ERR 3» No pressure in the cuﬀ An adequate pressure cannot be generated

in the cuﬀ. A leak may have occurred. Check

that the cuﬀ is correctly connected and is

not too loose. Replace the batterries

if necessary. Repeat the measurement.

«ERR 5» Abnormal result The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for performing

reliable measurements and then repeat the

measurement.*

What to do if ...

14 15

Error Description Potential cause and remedy

Blood pressure values

measured at your doctors

oﬃce

diﬀer from your

measurements.

Doctor visits can frequently

experience anxiety. Record the daily development of the

measured values and consult your

doctor.

Display remains

blank, or is unusual, when

instrument is switched on.

Batteries are not installed

properly. Check batteries for

correct polarity.

Device frequently fails to

measure blood pressure

values, or values measured

are too low (too high).

Cuﬀ may not be properly

positioned. Check the positioning of the

cuﬀ. See Cu tting on

page 10 for proper ﬁtting.

Specifications

Models: BPW200AR, BPW220AR

Operation principle: Oscillometric method

Display: Liquid crystal display

Measuring range: 20–280 mmHg

Pulse: 40–199 / min

Blood pressure

measurement: 20 mmHg (minimum diastolic value)

280 mmHg (maximum systolic value)

Laboratory accuracy: ± 3 mmHg (cuﬀ pressure)

± 5 % of reading (pulse rate)

Clinical accuracy: According to AAMI-SP10 with auscultatory reference:

< 5 mmHg systematic oﬀset

< 8 mmHg standard deviation

Inﬂation: Automatic

Power supply: 2 batteries, type AAA 1.5V

Operating temperature /

atmospheric pressure: +10 °C to +40 °C (50˚F – 104˚F),860-1060 hPa (0.849 - 1.046 atm)

Storage temperature: –20 °C to +55 °C (-4˚F to +131˚F)

Humidity: 15 to 90 % relative humidity maximum

Cuﬀ: Suitable for wrist circumference of 13.5 to 21.5 cm

(5.25 - 8.5 inches).

Clinical validation: According to AAMI-SP10 with auscultatory reference.

(Please note that a validation against intra-arterial

measurements can lead to diﬀerent results for devices

which are calibrated against auscultatory reference.)

Approximate Service Life: 5 years

If device is not used within speciﬁed temperature and humidity ranges the technical

accuracy can not be ensured.

Type BF applied parts

See instructions for use

Subject to change without notice.

Further information

Blood pressure is subject to ﬂuctuations even in healthy people. Comparable

measurements always require the same conditions (quiet conditions)!

In order to receive market clearance from governmental bodies, this device was

subjected to strict clinical tests.The computer program used to measure blood

pressure values was tested by experienced cardiac specialists in Germany.

Operating temperature

Storage temperature

16 17

Internally Powered Equipment

Continuous Operation

IP22: Protected against solid foreign objects of 12.5 mm diameter and greater.

Protected against vertically falling water drops when the device is tilted up to 15°

This device conforms to the following standards:

EN 60601-1: «Medical electrical equipment» –

Part 1: General requirements for safety

EN 1060-1: AMD 1 «Non-invasive sphygmomanometers» –

Part 1: General requirements

EN 1060-3: «Non-invasive sphygmomanometers» –

Part 3: Supplementary requirements for electro-mechanical blood pressure

measuring systems

EN 1060-4: Non Invasive Sphygmomanometers

Part 4:Test Procedures to Determine the Overall System Accuracy of Automated

Non-Invasive Sphygmomanometers

AND

EN 60601-1-2 Medical Electrical Equipment-

Part 1-2: General Requirements for Basic Safety and Essential Performance- Collateral

Standard: Electromagnetic Compatibility-Requirements andTests

AND

EN 60601-1-11: Medical Electrical Equipment

Part 1-11: General Requirements for Basic Safety and Essential Performance-

Collateral Standard: Requirements for Medical Electrical Equipment and Medical

Electrical Systems Used in the Home Healthcare Environment

0297

This product conforms to the provisions of the

EC directive 93 /42 / EEC (Medical Device Directive).

MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC.

For detailed description of EMC requirements please contact a service representative.

Portable and mobile RF communications equipment can aﬀect MEDICAL ELECTRICAL

EQUIPMENT.

Please do not dispose of the product in the household waste at the end

of its useful life. Disposal can take place at your local retailer or at

appropriate collection points provided in your country.

Guidance and manufacturer’s declaration – electromagnetic emissions

The ME equipment is intended for use in the electromagnetic environment speciﬁed

below. The customer or the user of the ME equipment should assure that

it is used in such an environment.

EmissionsTest Compliance Electromagnetic environment – guidance

RF Emissions

CISPR 11 Group 1

The ME equipment uses RF energy only for its internal

function. Therefore, its RF emissions are very low and

are not likely to cause any

interference in nearby electronic equipment.

RF Emissions

CISPR 11 Class B Complies

Harmonic emissions

IEC 61000-3-2 Not Applicable

The ME equipment is

solely battery powered.

Voltage ﬂuctuations/

ﬂicker emissions Not Applicable

Non-Life Support Equipment Separation Distance Calculation

(3Vrms / 3V/m compliance)

Rated maximum output

power of transmitter (W)

Separation distance according to

frequency of transmitter (m)

150 kHz to 80 MHz

in ISM bands

80 MHz to

800 MHz

800 MHz to

2.5 GHz

0.01 0.12 0.12 0.23

0.1 0.37 0.37 0.74

1 1.17 1.17 2.33

10 3.69 3.69 7.38

100 11.67 11.67 23.33

d= [3,5] P

d= [ 7 ] P

Andere Handbücher für VitalScan 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Braun Blutdruckmessgerät Handbücher

Braun

Braun ActivScan 9 Bedienungsanleitung

Braun

Braun VitalScan BP1750 Bedienungsanleitung

Braun

Braun iCheck 7 Bedienungsanleitung

Braun

Braun PrecisionSensor BP 2550 Bedienungsanleitung

Braun

Braun SensorControl BP 2550 Bedienungsanleitung

Braun

Braun iCheck 7 Bedienungsanleitung

Braun

Braun BPW4300C Bedienungsanleitung

Braun

Braun BP 3510 Bedienungsanleitung

Braun

Braun TrueScan BPW4100 Bedienungsanleitung

Braun

Braun VITALSCAN BP1000 Bedienungsanleitung

Braun

Braun VitalScan BPW 4300 Bedienungsanleitung

Braun

Braun ActivScan 9 Bedienungsanleitung

Braun

Braun BP4000 Bedienungsanleitung

Braun

Braun SensorControl Easy Click Bedienungsanleitung

Braun

Braun VitalScan Plus BP 1650 Bedienungsanleitung

Braun

Braun VitalScan 5 Bedienungsanleitung

Braun

Braun BP 1650 Bedienungsanleitung

Braun

Braun BP 3560 Bedienungsanleitung

Braun

Braun BP 2510 Bedienungsanleitung

Braun

Braun BP6100 Bedienungsanleitung

Braun

Braun ExactFit 3 Bedienungsanleitung

Braun

Braun BP4900 Bedienungsanleitung

Braun

Braun BBP 2000 Bedienungsanleitung

Braun

Braun SensorControl BP 2550 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung