A&D UA-767PC Bedienungsanleitung

Digital Blood Pressure Monitor

UA-767PC

Instruction Manual

1WMPD4000034E

Contents

Dear Customers .....................................................................................................3

Preliminary Remarks ..............................................................................................3

Precautions.............................................................................................................3

Parts Identification ..................................................................................................4

Symbols..................................................................................................................5

Setting the Clock ....................................................................................................6

Preparation for Measurements ...............................................................................7

1. Installing / Changing the Batteries ...............................................................7

2. Connecting the Air Hose..............................................................................7

3. Attaching the Arm Cuff.................................................................................7

4. How To Take Proper Measurements ...........................................................7

5. Measurement...............................................................................................7

6. After the Measurement ................................................................................7

Measurements........................................................................................................8

Notes for Proper Measurements.......................................................................10

Data in Memory ....................................................................................................11

Storing Data in Memory ....................................................................................11

Recalling Memory Data.....................................................................................11

Erasing Data in Memory ...................................................................................11

Transmitting Readings to a Computer..................................................................12

About Blood Pressure...........................................................................................13

What Is Blood Pressure? ..................................................................................13

What Is Hypertension And How Is It Controlled?..............................................13

Why Measure Blood Pressure At Home? .........................................................13

WHO Blood Pressure Classification..................................................................13

Blood Pressure Variations ................................................................................13

Troubleshooting....................................................................................................14

Maintenance .........................................................................................................15

Technical Data......................................................................................................15

Dear Customers

Congratulations on purchasing a state-of-the-art A&D blood pressure monitor,

one of the most advanced monitors available today. Designed for ease of use

and accuracy, this monitor will facilitate your daily blood pressure regimen.

We recommend that you read through this manual carefully before using

the device for the first time.

Preliminary Remarks

The device conforms to the following requirements: European Directive 93/42

EEC for Medical Products Act; Medical Products Act; European Standards for

Electrical Medical Equipment EN 60601-1 (General Safety Provisions),

EN 60601-1-2 and EN 55011 (Electromagnetic Compatibility); European

Standards pertaining to Non Invasive Blood Pressure Instruments

EN 1060-1(General Requirements), EN 1060-3 (Supplementary Requirements

for Electromechanical Blood Pressure Measuring Systems).

The above is evidenced by the mark of conformity.

(0366: The reference number to the involved notified body)

The device is designed for use on adults only, not newborns or infants.

Environment for use

The device is for use indoors.

Precautions

Precision components are used in the construction of this device. Extremes in

temperature, humidity, direct sunlight, shock or dust should be avoided.

Clean the device with a soft, dry cloth. Never use thinner, alcohol, benzine, or

a wet cloth.

Avoid tightly folding the cuff or storing the hose tightly twisted for long periods,

as such treatment may shorten the life of the components.

The device and cuff are not water resistant. Prevent rain, sweat and water

from soiling the device and cuff.

Measurements may be distorted if the device is used close to televisions,

microwave ovens, cellular telephones, X-ray or other devices with strong

electrical fields.

Used equipment, parts and batteries are not treated as ordinary household

waste, and must be disposed of according to the applicable local regulations.

Parts Identification

Systolic Display

Pressure Switch

Diastolic Display

Start Button

Pulse Display

Clock Display

Data Por

ir Socke

Measuremen

in Progress

Clock Button

Memory Access

Indicato

Low Battery Displa

1.5V Batteries

(R6P, LR6 or AA)

Air Connector Plug

rm Cuf

ir Hose

Symbols

Symbols Function / Meaning Treatment

Turns on or off the device

Sets the clock / Does not store the

current data

Direction guide to install battery

Direct current

SN Serial number

Date of manufacture

Type BF: Device, cuff and tubing are

designed to provide special protection

against electric shocks.

Appears when measurement is in

progress and flashes when the pulse

is detected.

Measurement is in progress --

remain as still as possible.

Previous measurement stored in

MEMORY

Appears when the battery voltage is

too low for the device to work properly.

Replace all batteries with new

ones.

Appears if the systolic and diastolic

measurements are within 10 mmHg of

each other.

Verify that the air hose is

properly connected and that the

exhaust rate is between 2 and 5

mmHg. Check for air leakage.

Appears if the pressure value is

unstable due to movement during the

measurement.

Try the measurement again.

Remain very still during the

measurement.

Appears if the pressure value did not

increase during pump up.

Verify that the air hose is

properly connected and that the

exhaust rate is between 2 and 5

mmHg. Check for air leakage.

System error Reload batteries.

Appears if pulses are not detected

correctly.

Attach the cuff properly and try

the measurement again.

Attention symbol See instruction for use

EC directive medical device label

WEEE label

Setting the Clock

The UA-767PC blood pressure monitor is equipped with a date and time function.

To set the clock on the monitor, follow these steps:

Press the clock button on the front of the monitor.

The blinking digits reflect the year. If they are not currently set on the correct year,

press the START button to advance to the correct year. The clock is set to show

years 1999 through 2098. If you pass the correct year, continue advancing the

clock until you have run through the cycle of years and are back at the correct

year.

To set the month and day, press the clock button again.

The month numeral(s) will blink. Press the START button to advance the numbers

to the correct month. Press the clock button again to advance to the day setting.

When the numbers reflecting the day of the month blink, press the START button

to advance the numbers to the correct day.

When you press the clock button again, the display will change and the time will

be shown in the same format as a digital clock, with the hour numerals blinking.

To set the correct hour, press the START button to advance the numbers to the

correct hour. To set the minutes, press the clock button again. The minute setting

will blink. Press the START button to advance the minutes until you reach the

correct setting. Press the clock again. The hour and minute display appears. This

is the standby mode.

Year

Month/Day

Hour/Minute

Left arm

Hose

2-3 cm (1 inch)

Excessive

constriction

Cuff

Preparation for Measurements

1. Installing / Changing the Batteries

Remove the battery cover and insert new

batteries into the battery compartment as shown,

taking care to observe the proper direction for

each battery. Use R6P, LR6 or similar type

batteries.

If the symbol appears on the display panel, this means that the batteries are

depleted. Always change all batteries at the same time. If you do not intend to use

the device for longer periods, remove the batteries. Only use high quality,

leakproof batteries with the specified ratings. Never mix new and old batteries or

batteries from different manufacturers.

Note:

Used equipment, parts, batteries do not fall within the category of household

waste, and must be disposed of according to the applicable regulations.

2. Connecting the Air Hose

Insert the air connector plug firmly into the air socket.

3. Attaching the Arm Cuff

Wrap the cuff around the upper arm about 2-3

cm (1 inch) above the elbow as shown. Place

the cuff directly against the skin, as clothing

may cause a faint heart beat, and result in an

error.

Constriction of the upper arm caused by rolling

up a shirt sleeve may prevent accurate

readings.

4. How To Take Proper Measurements

For the most accurate blood pressure measurement:

Sit comfortably at a table. Rest your arm on the table.

Relax for about five to ten minutes before measurement.

Place the center of the cuff at the same height as your heart.

Remain still and keep quiet during measurement.

Do not measure right after physical exercise or a bath. Rest for twenty or

thirty minutes before taking the measurement.

Try to measure your blood pressure at the same time every day.

5. Measurement

During the measurement, the cuff will become very tight. Do not be alarmed

as this is normal.

6. After the Measurement

After the measurement, remove the cuff and record your data.

Measurements

1. Place the cuff on the arm (preferably the left arm).

2. Set the PRESSURE switch to a value that will be 30 to 40 mmHg above the

expected systolic value and press the START button.

When the START button is pressed, all of the display symbols will appear

for about one second.

When the "0" is blinking, the device is calibrating its zero point. If there is

still some air in the arm cuff, it will be exhausted at this time.

The micro pump will pressurize the cuff.

Note: The cuff will become very tight. Do not be alarmed, as this is

normal.

If the START button or clock button is pressed again during pressurization

or during the measurement, the pump will stop and the air will be released

from the cuff.

3. When pressurization has been completed, the automatic exhaust mechanism

will gradually reduce the pressure in the cuff and the Measurement in

Progress symbol will appear along with the current pressure reading. This

symbol will flash in unison with the pulse of the person being monitored.

Measurement in

Progress

Measurements

Remain still while the device is in operation.

When a measurement is made with insufficient pressure, the device will

pump again to a higher pressure.

4. When measurement has been completed, the buzzer sounds and the air is

automatically released from the cuff. The systolic pressure, diastolic pressure

readings, and the pulse rate are displayed.

5. Turning the Power OFF

Press the START button to turn the power off. The device will be in standby

mode.

6. Subsequent Measurements

If a subsequent measurement is required, turn off the power and turn it on

again. When the "0" is displayed, the device is ready for measurement again.

Note: Please wait for about 10 minutes before repeating the

measurement.

7. Automatic Power OFF Function

If this device is left on after a measurement, it will turn itself off after about 1

minute. It may be turned off at any time by pressing the START button.

Systolic Display

Pressure Switch

Diastolic Display

Start Button

Pulse Dis

Measurements

Accurate measurement cannot be made if the exhaust velocity is outside

the range of 2 to 5 mmHg. This can be determined by watching the display

each time the "Measurement in Progress" symbol blinks. Note the reading

as the "Measurement in Progress" symbol blinks.

Notes for Proper Measurements

Sit in a comfortable position where you can place the arm to be used for the

measurement on a table or other support that will place the center of the upper

arm at about the same height as your heart.

Relax for about 5 or 10 minutes before starting the measurement. If you are

excited or depressed by emotional stress, the measurement will reflect this

stress as a higher (or lower) than normal blood pressure reading, the pulse

reading will usually be faster than normal.

A normal person's blood pressure varies constantly depending on what you

are doing and on what you have eaten. What you drink can have a very strong

and rapid affect on your blood pressure.

As this device bases its measurements on the heart beat, if you have a very

weak or irregular heart beat, the device may have difficulty determining your

proper blood pressure.

Should the device detect a condition that is abnormal, it will stop the

measurement and display an error. See the section on description of display

symbols for details.

This blood pressure device is intended for use by adults only. Consult with

your physician before using this device on a child. A child should not use this

device unattended.

Andere Handbücher für UA-767PC

Inhaltsverzeichnis

Andere A&D Blutdruckmessgerät Handbücher

A&D

A&D UA-787 Plus Bedienungsanleitung

A&D

A&D UA-1200CNBLE Bedienungsanleitung

A&D

A&D UA-767PBT-Ci Bedienungsanleitung

A&D

A&D TM-2440 Bedienungsanleitung

A&D

A&D UM-102 Bedienungsanleitung

A&D

A&D UA-774 Handbuch

A&D

A&D UA-1200BLE Bedienungsanleitung

A&D

A&D UA-787 Bedienungsanleitung

A&D

A&D Life Source UA-851THW Bedienungsanleitung

A&D

A&D AccuFit Bedienungsanleitung

A&D

A&D ESSENTIAL UA-651C Bedienungsanleitung

A&D

A&D UA-651BLE Bedienungsanleitung

A&D

A&D UA-789 XL Bedienungsanleitung

A&D

A&D SMARTMETER iBloodPressure 2.0 Bedienungsanleitung

A&D

A&D UA-767S Bedienungsanleitung

A&D

A&D TM-2430 Bedienungsanleitung

A&D

A&D ESSENTIAL UB-525 Bedienungsanleitung

A&D

A&D UA-767 Plus Bedienungsanleitung

A&D

A&D UA-1010 Bedienungsanleitung

A&D

A&D UB-510 Kurzanleitung

A&D

A&D UA-767PC Bedienungsanleitung

A&D

A&D UB-543 Bedienungsanleitung

A&D

A&D UB-510 Bedienungsanleitung

A&D

A&D UB-543 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung