Aastra 55I Bedienungsanleitung
Home
PBXware
SERVERware
TELCOware
SIPmon
SIPProt
Desktop & Mobile
BRM
UADs
Appliances
EOL
From Bicom Systems Wiki
Contents
1 How to use Aastra 55i with PBXware
■
2 Registering Aastra 55i
■
2.1 Requirements
■
2.2 Manual Configuration
■
2.3 Auto Provisioning
■
3 Paging
■
4 Glossary
■
How to use Aastra 55i with PBXware
This "How to" is written as general guide on how to use Aastra 55i with PBXware using SIP
Version 2.2 Aastra 55i firmware. It covers the most common tasks that are required to have your
Aastra 55i working efficiently.
Registering Aastra 55i
Requirements
1. Aastra 55i firmware.
- Make sure that device is loaded with SIP Version 2.2, up to 3.3.1.4053 firmware.
2. DHCP server.
- Fully configured and operational DHCP server.
Manual Configuration
UAD Settings
STEP ONE: PBXware IP address.
1. Find out the IP address of the PBXware server.
STEP TWO: Login to PBXware.
1. Open a new browser window and enter the IP address followed by "/admin/index.php" in
order to access the PBXware administration interface login screen.
Example: http://192.168.1.2/admin/index.php
UAD Settings an example with IP address following by "/admin/index.php"
2. Hit "Enter" on your keyboard.
3. Login to PBXware with your e-mail address and password.
UAD Settings
STEP THREE: UAD status.
3. Click on the "Save" button to save changes.
Creating Extension
STEP ONE: Add Extension.
1. Navigate to "Extensions". Click on "Add Extension".
Creating Extension
2. The standard options window will be shown below.
Creating
Extension/Extensions Add
3. Select Aastra 55i from "UAD" select box.
4. Select Location: "Local" or "Remote".
Note:
-"Local" is for all extensions registered on LAN.
-"Remote" is for all extensions registered from remote networks, WAN, Internet etc.
Creating
Extension/Extensions Add
5. Click on the "Next" button.
STEP TWO: Extension values.
1. Enter values into the required field text boxes.
REQUIRED FIELDS:
Name:
Enter a name for the extension being created. Example: John Smith.
E-mail:
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: [email protected].
Creating
Extension/Extensions Add
an example with details filled in
2. Click on the "Save" button.
Creating
Extension/Extensions Edit
an example with details filled in
3. Click on the "Save & E-mail" button. Account details will be sent to the e-mail address
associated with this extension.
OPTIONAL FIELDS:
Extension:
An auto-generated extension number based on the next available sequential number. An
extension value can be changed. Example: 1000.
Username:
Username is auto generated/populated and cannot be changed since it allows the system to use
this value for other important operations.
Secret:
A secret value associated with the UAD is auto-generated in order to allow the UAD to
successfully register with the system. The secret value can be changed.
PIN:
An auto-generated PIN will allow access to voicemail and online self care.
Registering Phone
STEP ONE: Electricity and Ethernet.
- Make sure to properly connect your Aastra 55i to the electricity network using a power
adapter or passive power over ethernet injector.
- Connect ethernet port to a hub, router or switch to access LAN.
Please Note: For information and instruction on how to connect your Aastra 55i to the
electricity network and ethernet, check manufacturer documentation on their web site
www.aastra.com.
After successfully connecting Aastra 55i to the electricity and data networks, it is time to
register it to PBXware.
STEP TWO: Aastra 55i IP address.
Find out the IP address of the Aastra 55i connected to the network.
1. Press the button with the "i" sign.
2. Select "Option list" from the menu.
3. Select "Phone status".
4. Select "IP & MAC addresses" option.
5. The IP address of your PBXware displays in the "IP Address" field.
STEP THREE: Aastra 55i Web Interface.
1. Open a new browser window and enter the IP address in order to access the Aastra 55i
administration interface.
Example: http://192.168.1.101/
Registering Phone
an example with IP address
2. Hit "Enter" on your keyboard.
3. Login to the Aastra 55i Web Interface. You'll be prompted to enter a username and password.
The factory default username is lower case "admin" and password is "22222".
STEP FOUR: Configuring Aastra 55i.
1. Click on "Line 1" link.
Registering Phone
2. Enter following details into the respective fields.
REQUIRED FIELDS:
Phone Number
PBXware extension number. Example: 1000
Authentication Name
Usually the same number as "Phone Number".
Password
The Secret of the extension as received in the e-mail associated with this extension. Example:
3dX3r5
Proxy Server
IP address of PBXware server. Example: 192.168.1.2
Proxy Port
5060
Registrar Server
IP address of PBXware server. Example: 192.168.1.2
Registrar Port
5060
Registering Phone
an example with details filled in
OPTIONAL FIELDS:
Screen Name
Example: John Smith
Other fields
Other "options" or "fields" should be left blank or as is by default, they have no importance for
registering your Aastra 55i to PBXware.
3. Click on the "Save Settings" button.
4. Click on "Reset" link.
Registering Phone
5. Click on the "Restart" button to restart Aastra 55i so that the changes take effect.
- Conclusion: If everything is done as above described you should have successfully registered
your Aastra 55i to PBXware. Dial *123 to verify registration.
- For further information, please contact the manufacturer or check their web site
www.aastra.com.
Auto Provisioning
UAD Settings
STEP ONE: PBXware IP address.
1. Find out the IP address of the PBXware server.
STEP TWO: Login to PBXware.
1. Open a new browser window and enter the IP address followed by "/admin/index.php" in
order to access the PBXware administration interface login screen.
Example: http://192.168.1.2/admin/index.php
UAD Settings
an example with IP address following by "/admin/index.php"
2. Hit "Enter" on your keyboard.
3. Login to PBXware with your e-mail address and password.
UAD Settings
STEP THREE: UAD status.
1. Make sure the UAD is enabled. To check the UAD status, navigate to "Settings:UAD", and
click on the "edit" icon corresponding to "Aastra 55i".
UAD Settings
2. Make sure "Status" is set to "active", "Auto provisioning" is set to "Yes" and "DHCP" is set to
"Yes".
UAD Settings
3. Click on the "Save" button to save changes.
Creating Extension
STEP ONE: Add Extension.
1. Navigate to "Extensions". Click on "Add Extension".
Creating Extension
2. The standard options window will be shown below.
Creating
Extension/Extensions Add
3. Select Aastra 55i from "UAD" select box.
4. Select Location: "Local" or "Remote".
Note:
-"Local" is for all extensions registered on LAN.
-"Remote" is for all extensions registered from remote networks, WAN, Internet etc.
Creating
Extension/Extensions Add
5. Click on the "Next" button.
STEP TWO: Extension values.
1. Enter values into required field text boxes.
Andere Handbücher für 55I
6
Inhaltsverzeichnis
Andere Aastra IP-Telefon Handbücher
Aastra
Aastra Clearspan 6739i Bedienungsanleitung
Aastra
Aastra 5361 Bedienungsanleitung
Aastra
Aastra 6721ip Bedienungsanleitung
Aastra
Aastra Clearspan 6739i Bedienungsanleitung
Aastra
Aastra 6757i CT RP Bedienungsanleitung
Aastra
Aastra Clearspan 6757i Bedienungsanleitung
Aastra
Aastra Dialog 4422 IP Office Bedienungsanleitung
Aastra
Aastra 480I SIP IP PHONE Bedienungsanleitung
Aastra
Aastra Aastra 620d Bedienungsanleitung
Aastra
Aastra 6753I Bedienungsanleitung
Aastra
Aastra 6755i Bedienungsanleitung
Aastra
Aastra 25i Bedienungsanleitung
Aastra
Aastra Clearspan 6757i Bedienungsanleitung
Aastra
Aastra 6735i Bedienungsanleitung
Aastra
Aastra Clearspan 6739i Bedienungsanleitung
Aastra
Aastra 7433ip Bedienungsanleitung
Aastra
Aastra AASTRA 9133 I Service-Handbuch
Aastra
Aastra Clearspan 6731i Bedienungsanleitung
Aastra
Aastra VentureIP 480i Bedienungsanleitung
Aastra
Aastra Aastra 610d Bedienungsanleitung
