AAT KaDe KDA-LOCK180Z-II Bedienungsanleitung

Electromagnetic locks and mounting brackets – Installation manual

AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

Installaon manual

ELECTROMAGNETIC LOCKS

AND MOUNTING BRACKETS

VERSION 3.0 07-07-2020

Electromagnetic locks and mounting brackets – Installation manual

2 AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

DIRECTIVES …………………………………………………………………………………………. 3

SAFEGUARDS AND WARNINGS …………………………………………………………... 4

1. INTRODUCTION ……………………………………….……………………………….……… 5

2. COMMERTIAL SIGN EXPLANATION ……...………………………………….….…. 5

3. ELECTROMAGNETIC LOCKS’ TECHNICAL PARAMETERS ………………...….….. 5

4. ELECTROMAGNETIC LOCKS’ ELECTRICAL CONNECTIONS ………..……….. 6

4.1. KDA-LOCK180Z-II ……………..………………………………………………………… 6

4.2. KDA-LOCK280DZC-II/350DZC/500DZC-II ………….…….………………. 6

5. KADE LOCKS AND COMPATIBLE BRACKETS LIST ……………….……………….. 6

6. ELECTROMAGNETIC LOCKS MOUNTING WAYS …………….………………….. 7

CONTENTS

Electromagnetic locks and mounting brackets – Installation manual

AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE

FOLLOWING DIRECTIVES:

Direcve 2014/30/EU of the European Parliament and of the Council of 26 February

2014 on the harmonisaon of the laws of the Member States relang to electromag-

nec compability (recast) Text with EEA relevance.

Direcve 2012/19/EU of the European Parliament and of the Council of 4 July 2012

on waste electrical and electronic equipment (WEEE) Text with EEA relevance

Direcve 2011/65/EU of the European Parliament and of the Council of 8 June

2011 on the restricon of the use of certain hazardous substances in electrical and

electronic equipment Text with EEA relevance

Informaon

The device, as a part of professional intercom system used for surveillance and control, is not

designed for self-installaon in households by individuals without technical knowledge

WARNING!

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN PRODUCT IN US-

ER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT DOES NOT

ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, MANUFACTURER MUST BE CONTACT-

ED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR THE RESULTS

OF SUCH AN ACTION.

WARNING!

THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A PROPER DEVICE OP-

ERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE YOURSELF WITH THE MANUAL PRIOR TO

INSTALLATION AND FURTHER DEVICE OPERATION.

WARNING!

USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO USER -SERVICEABLE

PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE PERSONNEL MAY OPEN THE UNIT INSTAL-

LATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE PERSONNEL AND

SHOULD CONFORM TO ALL LOCAL REGULATIONS

Electromagnetic locks and mounting brackets – Installation manual

4 AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

IMPORTANT SAFEGUARDS AND WARNINGS:

1. Prior to undertaking any acon please consult the following manual and read all the safety

and operang instrucons before starng the device.

2. Please keep this manual for the lifespan of the device in case referring to the contents of this

manual is necessary;

3. All the safety precauons referred to in this manual should be strictly followed, as they have

a direct inuence on user’s safety and durability and reliability of the device;

4. All acons conducted by the servicemen and users must be accomplished in accordance with

the user’s manual;

5. The device should be disconnected from power sources during maintenance procedures;

6. Usage of addional devices and components neither provided nor recommended by the pro-

ducer is forbidden;

7. Mounng the device on unstable surface or using not recommended mounts is forbidden.

8. Improperly mounted device may cause a fatal accident or may be seriously damaged itself.

Device must be mounted by qualied personnel with proper authorizaon, in accordance

with this user’s manual;

9. Device should be supplied only from a power sources whose parameters are in accordance

with those specied by the producer in the device’s technical datasheet. Therefore, it is for-

bidden to supply the device from a power sources with unknown parameters, unstable or not

meeng producer’s requirements;

10.Signal and power cables should be placed in a way excluding the possibility of damaging

them by accident. Special aenon must be paid to cables geng from the device and con-

necng the power supply;

11.Electric installaon supplying the device should be designed to meet the specicaons given

by the producer in such a way that overloading is impossible;

12.User cannot repair or upgrade the equipment himself. All maintenance acons and repairs

should be conducted only by qualied service personnel;

13. Unplug the device from the power source immediately and contact the proper maintenance

department when the following occurs:

• Damages to the power cord or to the plug itself;

• Liquids geng inside the device or exposure to strong mechanical shock;

• Device behaves in a way not described in the manual and all adjustments approved

by the

• manufacturer and possible to apply by user himself, seem not to have any eect;

• Device is damaged;

• Atypical behaviour of the device components may be seen (heard).

14.In necessity of repairs aenon to using only original replacement parts (with their parame-

ters in accordance with those specied by the producer) should be paid. Non-licensed service

and non-genuine replacement parts may cause re or electrocuon;

15. Aer maintenance acvies tests should be run to ensure proper operaon of all the func-

onal components of the device.

Electromagnetic locks and mounting brackets – Installation manual

AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

2. COMMERCIAL SIGN EXPLANATION

Commercial signs of KaDe locks contain informaon about technical parameters and addional properes.

Signs are explained below.

Properes

• D - door state sensor (magnet sensor)

• Z - lock state sensor (hallotron sensor)

• C - with me delay

KDA - LOCK XXX YYY

Holding force [kg]

• 180

• 280

• 350

• 500

1. INTRODUCTION

Electromagnec locks are one of the device types allowing door locking in physical access control sys-

tem. KaDe trademark oers wide range of locks with dierent parameters. Some models oer addional func-

onalies (e.g. built-in door state sensor). It allows to choose an equipment suitable for the customer.

3. ELECTROMAGNETIC LOCKS’ TECHNICAL PARAMETERS

Model

Current consumpon

[mA]

12 VDC power supply

Current consumpon

[mA]

24 VDC power supply

Dimensions

[mm]

L x H x W

KDA-LOCK180Z-II 280 240 170 x 39 x 24

KDA-LOCK280DZC-II 480 240 250 x 47 x 29

KDA-LOCK350DZC 480 240 288 x 55 x 29

KDA-LOCK500DZC-II 660 330 265 x 71 x 38

Electromagnetic locks and mounting brackets – Installation manual

6 AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

4. ELECTROMAGNETIC LOCKS’ ELECTRICAL CONNECTIONS

Electrical connecon schemes of KaDe electromagnec locks are shown in the pictures below.

5. KADE LOCKS AND COMPATIBLE BRACKETS LIST

The table below shows available electromagnec locks and compable mounng brackets in the oer.

Electromagnec lock „BZLC” type bracket „L” type bracket „ZL” type bracket

KDA-LOCK180Z-II - KDA-BL180-II KDA-BZL180-II

KDA-LOCK280DZC-II KDA-BZLC280-II KDA-BL280-II KDA-BZL280-II

KDA-LOCK350DZC - KDA-BL350 KDA-BZL350

KDA-LOCK500DZC-II - KDA-BL500-II KDA-BZL-500-II

4.2. KDA-LOCK280DZC-II/350DZC/500DZC-II Lock state sensor (Hallotron sensor)

Use NO & COM for normally open

circuit, and NC & COM for normally

closed circuit.

Power supply

12 VDC or

24 VDC

Power supply voltage

socket—connecon

from magnet coil

Connecon module

Door state sensor’s localizaon in lock

Magnet localizaon

Metal plate

Delay seng

0 s 9 s

280DZC-II, 350DZC,

500DZC-II only

Hallotron sensor socket

4.1. KDA-LOCK180Z-II

Red

Black

White

+12 VDC

GND

Lock state

sensor

(Hallotron sensor)

Electromagnetic locks and mounting brackets – Installation manual

AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

6. ELECTROMAGNETIC LOCKS MOUNTING OPTIONS

Depending on door construcon, doorframe width and door wing material there are dierent electro-

magnec locks’ mounng ways. In KaDe oer there are dierent types of brackets (L, ZL, ZLC), which allow to

install the lock on various doors.

STANDARD LOCKS MOUNTING

OUTSIDE

INSIDE

LOCK

DOORFRAME

LOCK

METAL PLATE

DOOR WING

“L” BRACKET

“Z” BRACKET

INSIDE

DOORFRAME LOCK

METAL PLATE

DOOR WING

“ZLC” BRACKET

Electromagnetic locks and mounting brackets – Installation manual

8 AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AAT Sperren Handbücher

AAT

AAT KDA-BOLT150 Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung