ABB ControlMaster CM15 Schulungshandbuch
—
ABB MEASUREMENT & ANALYTICS | COMMISSIONING INSTRUCTION | CI/CM15-EN REV. A
ControlMaster CM15
Universal process indicator, DIN
Measurement made easy
For more information
Further publications for the ControlMaster CM15 indicator are available for free download from:
www.abb.com/measurement
or by scanning this code:
Search for or click on:
Data sheet
User guide
IM/CM/I-EN
Communications supplement
IM/CM/C-EN
CONTROLMASTER CM15 | UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A 3
Contents
1 Health & Safety ............................................................4
Document symbols .........................................................4
Safety precautions.......................................................... 4
Potential safety hazards................................................ 5
Electrical .................................................................... 5
Safety standards ............................................................. 5
EC Directive 89/336/EEC............................................... 5
End-of-life disposal ........................................................ 5
Cleaning ............................................................................. 6
Symbols.............................................................................. 6
Restriction of Hazardous Substances (RoHS) ......... 6
2 Specification................................................................7
3 Installation ...................................................................9
Siting .................................................................................. 9
Mounting ......................................................................... 10
4 Electrical connections..............................................12
Accessing the connection terminals ........................ 13
Standard analog inputs (1 and 2)............................... 15
5 Front panel keys ........................................................16
6 Operator level menus ............................................... 17
7 Access levels and security options ........................18
Security options ............................................................ 18
8 Diagnostics messages .............................................19
9 Instrument menus.....................................................22
Notes...................................................................................26
4CONTROLMASTER CM15 |UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A
1 Health & Safety
Document symbols
Symbols that appear in this document are explained
below:
WARNING
The signal word ‘WARNING’ indicates an imminent
danger. Failure to observe this information may
result in death or severe injury.
NOTICE
The signal word ‘NOTICE’ indicates potential
material damage.
Note.
‘Note’ indicates useful or important information about
the product.
Safety precautions
Be sure to read, understand and follow the instructions
contained within this manual before and during use of
the equipment. Failure to do so could result in bodily
harm or damage to the equipment.
WARNING
Installation and maintenance of this product must
only be conducted by personnel authorized to work
on electrical installations and in accordance with
relevant local regulations.
CONTROLMASTER CM15 | UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A 5
Potential safety hazards
Electrical
WARNING
To ensure safe use when operating this equipment,
the following points must be observed:
• Up to 240 V AC may be present. Be sure to isolate
the supply before removing the terminal cover.
• Normal safety precautions must be taken to
avoid the possibility of an accident occurring
when operating in conditions of high pressure
and/or temperature.
Safety advice concerning the use of the equipment
described in this manual or any relevant Material
Safety Data Sheets (where applicable) can be
obtained from the Company, together with servicing
and spares information.
Safety standards
This product has been designed to satisfy the
requirements of IEC61010-1:2010 3rd edition 'Safety
Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use' and
complies with US NEC 500, NIST and OSHA.
EC Directive 89/336/EEC
Electrical – In order to meet the requirements of the EC
Directive 89/336/EEC for EMC regulations, this
product must be used in an industrial environment.
End-of-life disposal
The indicator contains a small lithium battery that
must be removed and disposed of responsibly in
accordance with local environmental regulations.
The remainder of the indicator does not contain
any substance that causes undue harm to the
environment and must be disposed of in
accordance with the Directive on Waste Electrical
and Electronic Equipment (WEEE). It must not be
disposed of in Municipal Waste Collection.
6CONTROLMASTER CM15 |UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A
…1 Health & Safety
Cleaning
The indicator can be hosed down if it has been installed
to IP66/NEMA 4X standards. Warm water and a mild
detergent can be used.
Symbols
Symbols that appear on this product are shown below:
Protective earth (ground) terminal.
Both direct and alternating current supply.
This symbol, when noted on a product, indicates a
potential hazard that could cause serious personal
injury and/or death. The user must refer to this
commissioning instruction for operation and/or
safety information.
This symbol, when noted on a product enclosure or
barrier, indicates that a risk of electrical shock
and/or electrocution exists. Only individuals
qualified to work with hazardous voltages should
open the enclosure or remove the barrier.
Recycle separately from general waste under the
WEEE directive
Restriction of Hazardous Substances (RoHS)
The European Union RoHS Directive and
subsequent regulations introduced in member
states and other countries limits the use of six
hazardous substances used in the manufacturing
of electrical and electronic equipment. Currently,
monitoring and control instruments do not fall
within the scope of the RoHS Directive, however
ABB has taken the decision to adopt the
recommendations in the Directive as the target for
all future product design and component
purchasing.
CONTROLMASTER CM15 | UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A 7
2 Specification
Mechanical data
Protection
• Front face IP66/ NEMA 4X
• Rear panel IP20
Dimensions
• Height – 50 mm (2.0 in)
• Width – 97 mm (3.8 in)
• Depth behind panel – 120 mm (4.8 in)
Materials of construction
Glass filled polycarbonate
Weight
0.38 kg (0.84 lb)
Electrical
Power supply ranges
• 100 to 240 V AC ±10 % (90 V min. to 264 V max.)
50/60 Hz
• 10 to 36 V DC (optional)
Power consumption
10 W max.
Inputs/Outputs
Analog inputs
• 1 universal
• 1 process
Analog outputs
• 1 standard
• 1 optional
• Galvanically isolated from the rest of the circuitry,
500V for up to 1 minute. Range programmable
@ 20 mA.
Relay outputs
• 1 standard
• 3 optional
• Fully programmable. Contacts rated at 5 A @ 240 V.
Standard relays are changeover. Optional relays are
selectable NO or NC by jumper.
8CONTROLMASTER CM15 |UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A
…2 Specification
Digital inputs/outputs
2 optional, user programmable as input or output.
Minimum input pulse duration: 125 ms
Input
• Volt free
• 24 V DC (1 signal 15 to 30 V, 0 signal -3 to 5 V)
Output
• Open collector output
• 30 V, 100 mA max. switched
• Conforms to IEC 61131-2
Update Rate
125 ms
Environmental data
Ambient operating temperature
0 to 55 °C (32 to 131 °F)
Ambient operating humidity
5 to 95 % RH non-condensing
Storage temperature
–20 to 70 °C (–4 to 158 °F)
Approvals, certification & general safety
• EN-61010-1
• cULus
• Overvoltage class III on mains, Class II on
inputs and outputs
• Pollution category 2
• Insulation category 2
Emissions and Immunity
Meets the requirements of IEC 61326 for an industrial
environment
CONTROLMASTER CM15 | UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A 9
3 Installation
• Locate the indicator in a position where its operating temperature and humidity limits will not be exceeded and
ensure that it is suitably protected from direct sunlight, rain, snow and hail.
• Select a location away from strong electrical and magnetic fields. If this is not possible (particularly in
applications where mobile communications equipment is used), use screened cables within flexible, earthed
metal conduit.
Siting
At eye level Close to the sensor
Sensor
Avoid vibration
Figure 1 Siting
Temperature limits Humidity limits Use screened cable
IP66/NEMA4X (front panel), IP20 (rear)
0 to 95 % RH
55 °C
(131 °F)
max.
0 °C
(32 °F)
min.
Figure 2 Environmental requirements
10 CONTROLMASTER CM15 |UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A
…3 Installation
Mounting
ControlMaster CM15 is designed for panel mounting.
For NEMA4X protection, a panel thickness of 2.5 mm
(0.1 in) is required.
Referring to Figure 3:
1 Cut a hole of the correct size for the indicator in the
panel.
2 Insert the indicator into the panel cut-out.
97 (3.8)
50
(2.0)
120 (4.8)
140 (5.5)
44.8
(1 .7 )
20 (0.8)
14 (0.55)
≥30 (1.18)
45
(1.8 )
+0.6
–0
+0.02
–0
92
(3.6 )
+0.8
–0
+0.03
–0
Panel cut-out dimensions
Figure 3 Mounting dimensions
Andere Handbücher für ControlMaster CM15
3
Inhaltsverzeichnis
Andere ABB Controller Handbücher
ABB
ABB M2301 Bedienungsanleitung
ABB
ABB C250 Bedienungsanleitung
ABB
ABB i-bus KNX FCL/S 1.6.1.1 Bedienungsanleitung
ABB
ABB ControlMaster CM30 Bedienungsanleitung
ABB
ABB LME620-AI Bedienungsanleitung
ABB
ABB ACS 6000 Kurzanleitung
ABB
ABB PSTX30 Leitfaden
ABB
ABB PSTX470 Bedienungsanleitung
ABB
ABB ARC600 Bedienungsanleitung
ABB
ABB ACS880-04 drive modules Bedienungsanleitung
ABB
ABB BSFC-02C Bedienungsanleitung
ABB
ABB Jokab Safety Safeball JSTD1 Bedienungsanleitung
ABB
ABB ACS550-U1-08A8-4 Bedienerhandbuch
ABB
ABB ACS550 Series Bedienungsanleitung
ABB
ABB ACS880-01 Series Bedienungsanleitung
ABB
ABB i-bus KNX Bedienungsanleitung
ABB
ABB M10 Series Bedienungsanleitung
ABB
ABB i-bus KNX Room Master Premium RM/S 2.1 Bedienungsanleitung
ABB
ABB ACS580-04 Bedienungsanleitung
ABB
ABB Galaxy Millennium J2011002 Bedienungsanleitung
