ABB REF615 ANSI 5.0 FP1 Bedienungsanleitung

—

PRODUCT GUIDE

REF615 ANSI 5.0 FP1

Feeder protection and control

2REF615 ANSI 5.0 FP1 FEEDER PROTECTION AND CONTROL

—

Table of contents

03 1. Description

03 2. Standard configurations

14 3. Protection functions

15 4. Application

24 5. Supported ABB

solutions

25 6. Control

26 7. Measurements

26 8. Power quality

26 9. Fault location

26 10. Disturbance recorder

27 11. Event log

27 12. Recorded data

27 13. Condition monitoring

27 14. Trip-circuit supervision

28 15. Self-supervision

28 16. Fuse failure supervision

28 17. Current circuit

supervision

28 18. Access control

28 19. Inputs and outputs

30 20. Station communication

35 20. Technical data

65 21. Local HMI

66 22. Mounting methods

66 23. Relay case and plug-in

unit

66 24. Selection and ordering

data

67 25. Accessories and

ordering data

68 26. Tools

69 27. Cyber security

70 28. Terminal diagrams

75 29. Certificates

75 30. Inspection reports

75 31. References

76 32. Functions, codes and

symbols

79 33. Document revision

history

—

REF615 ANSI 5.0 FP1

Feeder protection & control

1. Description

REF615 is a dedicated feeder protection and con-

trol relay designed for the protection, control, mea-

surement and supervision of utility substations

and industrial power systems including radial,

looped and meshed distribution networks with

or without distributed power generation. REF615 is

a member of ABB’s Relion® product family and part

of its 615 protection and control product series.

The 615 series relays are characterized by their

compactness and withdrawable-unit design.

Re-engineered from the ground up, the 615 series

has been designed to unleash the full potential of

the IEC 61850 standard for communication and in-

teroperability between substation automation de-

vices.

The relay provides main protection for overhead

lines and cable feeders in distribution networks.

The relay is also used as backup protection in appli-

cations, where an independent and redundant pro-

tection system is required.

Depending on the chosen standard configuration,

the relay is adapted for the protection of overhead

line and cable feeders in isolated neutral, resis-

tance grounded, compensated and solidly

grounded networks. Once the standard configura-

tion relay has been given the application-specific

settings, it can directly be put into service.

The 615 series relays support a range of communi-

cation protocols including IEC 61850 with Edition 2

support, process bus according to IEC 61850-9-2

LE, Modbus® and DNP3.

2. Standard configurations

REF615 is available in five alternative standard

configurations. The standard signal configuration

can be altered by means of the signal matrix or the

graphical application functionality of the Protec-

tion and Control Relay Manager PCM600. Further,

the application configuration functionality of

PCM600 supports the creation of multi-layer logic

functions using various logical elements, including

timers and flip-flops. By combining protection

functions with logic function blocks, the relay con-

figuration can be adapted to userspecific applica-

tion requirements.

The relay is delivered from the factory with default

connections described in the functional diagrams

for binary inputs, binary outputs, function-to-func-

tion connections and alarm LEDs. Some of the sup-

ported functions in REF615 must be added with the

Application Configuration tool to be available in the

Signal Matrix tool and in the relay. The positive

measuring direction of directional protection func-

tions is towards the outgoing feeder.

4REF615 ANSI 5.0 FP1 FEEDER PROTECTION AND CONTROL

792

51P-1 50P-1 50P-3

46PD37-149F-1

51G

REF615 V5.0 FP-1 ANSI Func Appl D

1Available with Harmonic-based earth-fault option

2Available with Reclosing option

3Available with Arc Flash Detection(AFD) option

4Available with RTD option

AFD-

51N-1

50P-2

46-2

46-1

50G-3

BF-1

50N

BF-1

51NHA1

Load

Prof.

50G-1

INR-1

HIZ-1

384

—

Figure 1. Functionality

overview for standard

configuration D

795

50G-1

Available with Admittance-based earth fault option

Available with Wattmetric-based earth fault option

Available with Harmonic-based earth fault option

Available with Arc Flash Detection(AFD) option

Available with Reclosing option

Available with RTD option

AFD-

Υor Δ

51N-1

21YN-

67/

51P-1

67/

51P-2

67/

50P-1

BF-1

67/

51N-1

67/

51N-2

21YN-

50P-3

REF615 V5.0 FP1 ANSI Func Appl F

46-1

32N-12

67NIEF

HIZ 32N-3232N-22

51NHA

67/

50N-1

46-2 46PD 49F-1 59G

27-1

27-2

27-3

47-1

47U-1

59N-2

59N-1

INR-1

59-3

59-2

59-1

386

60-1

—

Figure 2. Functionality

overview for standard

configuration F

6REF615 ANSI 5.0 FP1 FEEDER PROTECTION AND CONTROL

32U-1

51G

Available with Admittance-based earth fault option

Available with Wattmetric-based earth fault option

Available with Harmonic-based earth fault option

Available with Arc Flash Detection(AFD) option

Available with Reclosing option

Available with RTD option

Available with IEC 61850-9-2LE option

Available with Fault locator option

Available with interconnection option

AFD-

Va, Vb, Vc

21YN-

50P-3

REF615 V5.0 FP1 ANSI Func Appl L

46-1

32N-1

67NIEF

HIZ 32N-3

32N-2

51NHA

46-2 46PD 49F-1 27-1

27-2

27-3

47-1

47U-2

59N-2

59N-1

59-3

59-2

59-1

60-1

50G-1

51P-2 50P-1 50P-2 50

BF-1

67/

51P-1

67/

51P-2

67/

50P-1

51N-1 67/

51N-1

67/

51N-2

67/

50N-1

INR-1

67/

50P-2

50N-350N-250N-1

50G-2 50G-3

67/

50N-2

81-1

47-2

47U-1

81-3

81-2

81-4

81-5

81-6

32U-2

32R/

32O-2

32R/

32O-1

21FL-

51P-1

32Q-

67YN-

78V-1

27RT-

27R-1

59G

—

Figure 3. Functionality

overview for standard

configuration L

32U-1

795

51G

Available with Admittance-based earth fault option

Available with Wattmetric-based earth fault option

Available with Harmonic-based earth fault option

Available with Arc Flash Detection(AFD) option

Available with Reclosing option

Available with RTD option

Reserve the 3 current inputs for HIB protection when used

Available with Fault locator option

Available with interconnection option

AFD-

Υor Δ

21YN-

50P-3

REF615 V5.0 FP1 ANSI Func Appl N

46-1

32N-12

67NIEF

HIZ 32N-3232N-22

51NHA

46-2 46PD 49F-1 59G

27-1

27-2

27-3

47-1

47U-2

59N-2

59N-1

59-3

59-2

59-1

386

60-1

50G-1

51P-2 50P-1 50P-2 50

BF-1

67/

51P-1

67/

51P-2

67/

50P-1

51N-1 67/

51N-1

67/

51N-2

67/

50N-1

INR-1

67/

50P-2

50N-350N-250N-1

50G-2 50G-3

67/

50N-2

81-1

47-2

47U-1

81-3

81-2

81-4

27R-1

81-5

81-6

87A7

87B7

87C7

32U-2

32R/

32O-2

32R/

32O-1

21FL-

51P-1

32Q-

67YN-

78V-19

27RT-

—

Figure 4. Functionality

overview for standard

configuration N

8REF615 ANSI 5.0 FP1 FEEDER PROTECTION AND CONTROL

37-1

50G-1

51G

1Available with Fault Locator option

2Available with Arc Flash Detection(AFD) option

3Available with Reclosing option

AFD-

Υor Δ

50N-1

50BF-

51N-1

46-2

50N-2 50N-3

50G-2 50G-3

67/

50P-1

67/

50P-2

BF-1

67/

50N-2

67/

50N-1

INR-1

51P-1 50P-1 50P-3

REF615 V5.0 FP1 ANSI Func Appl P

50P-2 46-1

59N-1

27-2

59-2

47-2

59N-2

60-2

27R-2

79321FL-11

27-1

59-1

47-1

27R-1

60-1

—

Figure 5. Functionality

overview for standard

configuration P

—

Table 1. Standard configurations

Description Std. conf.

Non-directional overcurrent and ground fault protection and circuit-breaker condition monitoring (RTD option) D

Directional overcurrent and ground fault protection, voltage-based protection and measurements, and circuitbreaker condition monitoring

(RTD option), and voltage remanent protection F

Directional and non-directional overcurrent and ground fault protection with multifrequency neutral admittance, voltage, frequency and

power based protection and measurements, and circuit-breaker condition monitoring (sensor inputs, optional power quality, fault locator,

 L

Directional and non-directional overcurrent and ground fault protection with multifrequency neutral admittance, voltage, frequency and

power based protection and measurements, high-impedance differential protection, synchro-check and circuit-breaker condition monitoring

(optional power quality, fault locator, interconnection protection and voltage remanent protection) N

Directional overcurrent and ground fault, voltage and voltage remanent protection and power system metering for two tie breakers with

synchro-check P

—

Table 2. Supported functions

Function IEC 61850 ANSI D F L N P

Protection

Three-phase non-

directional overcurrent

protection, low stage PHLPTOC     

Three-phase non-

directional overcurrent

protection, high stage PHHPTOC  





Three-phase non-

directional overcurrent

protection,

instantaneous stage PHIPTOC  

Three-phase directional

overcurrent protection,

low stage DPHLPDOC      

Three-phase directional

overcurrent protection,

high stage DPHHPDOC      



 

Non-directional earth-

fault protection, low

stage EFLPTOC 

















Non-directional earth-

fault protection, high

stage EFHPTOC   













Non-directional earth-

fault protection,

instantaneous stage EFIPTOC  













Directional earth-fault

protection, low stage DEFLPDEF     

Directional earth-fault

protection, high stage DEFHPDEF         

Admittance-based

 EFPADM    

Wattmetric-based earth-

 WPWDE    



earth-fault protection INTRPTEF    

Harmonics-based earth-

 HAEFPTOC     

Negative-sequence

overcurrent protection NSPTOC  

Phase discontinuity

protection PDNSPTOC     

Residual overvoltage

protection ROVPTOV    





Three-phase

undervoltage protection PHPTUV  





Three-phase overvoltage

protection PHPTOV  





Function IEC 61850 ANSI D F L N P

Protection

Three-phase non-

directional overcurrent

protection, low stage PHLPTOC     

Three-phase non-

directional overcurrent

protection, high stage PHHPTOC  





Three-phase non-

directional overcurrent

protection,

instantaneous stage PHIPTOC  

Three-phase directional

overcurrent protection,

low stage DPHLPDOC      

Three-phase directional

overcurrent protection,

high stage DPHHPDOC      



 

Non-directional earth-

fault protection, low

stage EFLPTOC 

















Non-directional earth-

fault protection, high

stage EFHPTOC   













Non-directional earth-

fault protection,

instantaneous stage EFIPTOC  













Directional earth-fault

protection, low stage DEFLPDEF     

Directional earth-fault

protection, high stage DEFHPDEF         

Admittance-based

Wattmetric-based earth-



earth-fault protection INTRPTEF    

Harmonics-based earth-

Negative-sequence

overcurrent protection NSPTOC  

Phase discontinuity

protection PDNSPTOC     

Residual overvoltage

protection ROVPTOV    





Three-phase

undervoltage protection PHPTUV  





Three-phase overvoltage

protection PHPTOV  





Positive-sequence

undervoltage protection PSPTUV  



 

Negative-sequence

overvoltage protection NSPTOV  



 





Three-phase remnant

undervoltage protection MSVPR   





Frequency protection FRPFRQ 



 

Three-phase thermal

protection for feeders,

cables and distribution

transformers      

High-impedance

differential protection

for phase A   

High-impedance

differential protection

for phase B HIBPDIF  

—

Table 2. Supported functions, continued

10 REF615 ANSI 5.0 FP1 FEEDER PROTECTION AND CONTROL

Inhaltsverzeichnis

Andere ABB Schutzvorrichtung Handbücher

ABB

ABB Relion REB500 Gebrauchsanweisung

ABB

ABB RELION REL670 Bedienungsanleitung

ABB

ABB Relion REG670 Bedienungsanleitung

ABB

ABB Relion REB500 Bedienungsanleitung

ABB

ABB Relion 670 series Gebrauchsanweisung

ABB

ABB REG316 4 Series Bedienungsanleitung

ABB

ABB Relion 670 series Bedienungsanleitung

ABB

ABB Relion 670 Series REL670 Kurzanleitung

ABB

ABB RED670 Relion 670 series Bedienungsanleitung

ABB

ABB Relion 670 series Kurzanleitung

ABB

ABB PCM600 Bedienungsanleitung

ABB

ABB Relion 670 series Kurzanleitung

ABB

ABB RELION REL650 Bedienungsanleitung

ABB

ABB RELION REX640 Bedienungsanleitung

ABB

ABB Relion 615 series Bedienungsanleitung

ABB

ABB Relion 670 series Bedienungsanleitung

ABB

ABB Relion 650 series RET650 Bedienungsanleitung

ABB

ABB RED670 Relion 670 series Kurzanleitung

ABB

ABB relion REF615 Bedienungsanleitung

ABB

ABB REF601 Bedienungsanleitung

ABB

ABB Relion REQ650 Gebrauchsanweisung

ABB

ABB REF611 Gebrauchsanweisung

ABB

ABB RELION RET670 Leitfaden

ABB

ABB REF601 Gebrauchsanweisung

Beliebte Schutzvorrichtung Handbücher anderer Marken

Sola HD

Sola HD STV100K Series Bedienungsanleitung

socomec

socomec COUNTIS AMd Bedienungsanleitung

Kemo Electronic

Kemo Electronic M148-24 Bedienungsanleitung

SK ClickClick Bedienungsanleitung

Endress+Hauser

Endress+Hauser HAW569 Bedienungsanleitung

Ultrasonic

Ultrasonic SonicPRO Bedienungsanleitung

nxt

nxt BIA-nXt-DPC 1-22 Bedienungsanleitung

TFortis

TFortis SG-Switch Bedienungsanleitung

BERNINI DESIGN

BERNINI DESIGN Be172 Bedienungsanleitung

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYSET-3P-ESS-50-100 Bedienungsanleitung

GE Multilin 3 Series Bedienungsanleitung

E.K.T.

E.K.T. ke-DP01 Bedienungsanleitung

Siemens

Siemens SIPROTEC 7SD80 Bedienungsanleitung

cias

cias MICRO-RAY Bedienungsanleitung

Sungrow

Sungrow PVS-16MH Bedienungsanleitung

Reer

Reer 32010 Bedienungsanleitung

Tyco

Tyco ESFR-17 Bedienungsanleitung

Ross

Ross Opengear SRA-8901-R Bedienungsanleitung