ABB REG316 4 Series Bedienungsanleitung

REG316*4

Numerical Generator Protection

Operating Instructions

1MRB520049-Uen

Edition July 2002

ã1996 ABB Switzerland Ltd

Baden

6th Edition

Applies for software versionV6.3

All rights with respect to this document, including applications for patent and

registration of other industrial property rights, are reserved. Unauthorised use, in

particular reproduction or making available to third parties, is prohibited.

This document has been carefully prepared and reviewed. Should in spite of this

the reader find an error, he is requested to inform us at his earliest convenience.

The data contained herein purport solely to describe the product and are not a

warranty of performance or characteristic. It is with the best interest of our

customers in mind that we constantly strive to improve our products and keep

them abreast of advances in technology. This may, however, lead to discrep-

ancies between a product and its “Technical Description” or “Operating Instructions”.

Version 6.3

1. Introduction B

2. Description of hardware C

3. Setting the function F

4. Description of function and application B

5. Operation (HMI) E

6. Self-testing and diagnostics C

7. Installation and maintenance C

8. Technical data B

9. Interbay bus (IBB) interface E

10. Supplementary information G

12. Appendices C

How to use the Operating Instructions for the REG316*4 V6.3

What do you wish to What precisely? Look in the following Indices (I) / Sections (S):

know about the device ...

* General theoretical 



 Brief introduction  I 1 (Introduction)

familiarisation  General overview  I 1, S 2.1. to S 7.1. (all Section summaries)

 Technical data  I 8 (Technical data: Data Sheet)

 Hardware  I 2 (Description of hardware)

 Software 



 I 3 (Setting the functions)

 I 4 (Description of function and application)

 I 6 (Self-testing and monitoring)

 I 10 (Software changes)

* How to install 



 Checks upon receipt  S 7.2.1.

and connect it  Location  S 7.2.2.

 Process connections  I 12 (Wiring diagram), S 7.2., S 7.3.2. to S 7.3.5.

 Control system connections 



 I 9 (IBB)

 S 9.6. (IBB address list)

* How to set and 



 Installing the MMI  S 5.2.

configure it  Starting the MMI  S 7.3.1., S 5.2.3.

 Configuration  S 3.2. to S 3.4., S 5.4., S 5.5., S 5.11.

 Setting functions  S 3.5. to S 3.7., S 5.4., S 5.5., S 5.11.

 Quitting the MMI  S 5.2.3.

* How to check, test 



 Checking the connections  S 7.2.3. to S 7.2.7.

and commission it  Functional test  S 5.9.

 Commissioning checks  S 7.3.6.

* How to maintain it 



 Fault-finding  S 7.4.1., S 5.8.

 Updating software  S 7.5.

 Adding hardware  S 7.6.

* How to view and 



 Sequential recorder  S 5.6.

transfer data  Disturbance recorder  S 5.6., S 3.7.4.

 Measurements  S 5.7.

Local Display UnitS 5.13.

REG 316*4 1MRB520049-Uen / Rev. B ABB Switzerland Ltd

1-1

March 01

1. INTRODUCTION

1.1. General .................................................................................... 1-2

1.2. Application ............................................................................... 1-3

1.3. Main features ........................................................................... 1-3

ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. B

1-2

1. INTRODUCTION

1.1. General

The numerical generator protection scheme REG 316*4 is one of

the new generation of fully digital protection systems, i.e. the

analogue-to-digital conversion of the measured input variables

takes place immediately after the input transformers and the re-

sulting digital signals are processed exclusively by programmed

micro-processors.

Within the PYRAMID®system for integrated control and protec-

tion, REG 316*4 represents one of the compact generator

protection units.

Because of its compact design, the use of only a few different

hardware units, modular software and continuous self-monitoring

and diagnostic functions, the REG 316*4 scheme optimally fulfils

all the demands and expectations of a modern protection

scheme with respect to efficient economic plant management

and technical performance.

The AVAILABILITY — the ratio between fault-free operating time

and total operational life — is certainly the most important re-

quirement a protection device has to fulfil. As a result of con-

tinuous monitoring, this ratio in the case of REG 316*4 is almost

unity.

Operation, wiring and compactness of the protection are the es-

sence of SIMPLICITY thanks to the interactive, menu-controlled

man/machine communication (HMC) program. Absolute FLEXI-

BILITY of the REG 316*4 scheme, i.e. adaptability to a specific

primary system or existing protection (retrofitting), is assured by

the supplementary functions incorporated in the software and by

the ability to freely assign inputs and outputs via the HMC.

Decades of experience in the protection of generators have gone

into the development of the REG 316*4 to give it the highest

possible degree of RELIABILITY, DISCRIMINATION and STA-

BILITY. Digital processing of all the signals endows the scheme

with ACCURACY and constant SENSITIVITY throughout its

useful life.

The designation “RE. 316*4” is used in the following

sections of these instructions whenever the information

applies to the entire series of devices.

REG 316*4 1MRB520049-Uen / Rev. B ABB Switzerland Ltd

1-3

1.2. Application

The REG 316*4 numerical generator protection has been

designed for the high-speed discriminative protection of small

and medium size generators. It can be applied to units with or

without step-up transformer in power utility or industrial power

plants.

REG 316*4 places relatively low requirements on the perform-

ance of c.t’s and v.t’s and is independent of their characteristics.

1.3. Main features

REG 316*4’s library of protection functions includes the follow-

ing:

·generator differential (Diff-Gen)

·transformer differential (Diff-Transf )

·definite time over and undercurrent (Current-DT)

·provision for inrush blocking

·peak value overcurrent (Current-Inst)

·voltage-controlled overcurrent (Imax-Umin)

·inverse time overcurrent (Current-Inv)

·directional definite time overcurrent (DirCurrentDT)

protection

·directional inverse time overcurrent (DirCurrentInv)

protection

·definite time NPS (NPS-DT)

·inverse time NPS (NPS-Inv)

·definite time over and undervoltage (Voltage-DT)

·peak value overvoltage (Voltage-Inst)

·underimpedance (Underimped)

·underreactance (MinReactance)

·power protection (Power)

·stator overload (OLoad-Stator)

·rotor overload (OLoad-Rotor)

·frequency (Frequency)

·rate-of-change frequency protection (df/dt)

·overexcitation (Overexcitat)

·inverse time overexcitation (U/f-Inv)

·voltage comparison (Voltage-Bal)

·overtemperature (Overtemp)

·100 % stator ground fault (Stator-EFP)

·100 % rotor ground fault (Rotor-EFP)

·pole slipping (Pole-Slip)

ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. B

1-4

·invers time ground fault overcurrent (I0-Invers)

·breaker failure protection (BreakerFailure)

·supplementary logic functions such as

·supplementary user logic programmed using CAP316

(function plan programming language FUPLA). This

requires systems engineering.

·logic

·timers

·metering

·debounce.

The following measuring and monitoring functions are also avail-

able:

·single-phase measuring function UIfPQ

·three-phase measurement module

·three-phase current plausibility

·three-phase voltage plausibility

·disturbance recorder.

The scheme includes an event memory.

The allocation of the opto-coupler inputs, the LED signals and

the auxiliary relay signal outputs, the setting of the various pa-

rameters, the configuration of the scheme and the display of the

events and system variables are all performed interactively using

the menu-driven HMC (man/machine communication).

REG 316*4 is equipped with serial interfaces for the connection

of a local control PC and for remote communication with the

station control system.

REG 316*4 is also equipped with continuous self-monitoring and

self-diagnostic functions. Suitable testing devices (e.g. test set

XS92b) are available for quantitative testing.

REG 316*4 can be semi-flush or surface mounted or can be in-

stalled in an equipment rack.

Inhaltsverzeichnis

Andere ABB Schutzvorrichtung Handbücher

ABB

ABB REG650 ANSI Bedienungsanleitung

ABB

ABB REM615 ANSI Datenblatt

ABB

ABB REB650 Bedienungsanleitung

ABB

ABB RELION RET670 Bedienungsanleitung

ABB

ABB RELION RET670 Bedienungsanleitung

ABB

ABB RARIC Bedienungsanleitung

ABB

ABB MPS-C 2000 Bedienungsanleitung

ABB

ABB RET630 Bedienungsanleitung

ABB

ABB ret650 Bedienungsanleitung

ABB

ABB REQ650 1.3 IEC Kurzanleitung

ABB

ABB Relion 615 series Bedienungsanleitung

ABB

ABB RELION REB670 Gebrauchsanweisung

ABB

ABB REB670 Series Gebrauchsanweisung

ABB

ABB POLIM Bedienungsanleitung

ABB

ABB RET615 Bedienungsanleitung

ABB

ABB Relion 615 series Bedienungsanleitung

ABB

ABB PCM600 Bedienungsanleitung

ABB

ABB RELION 670 SERIES REG670 Gebrauchsanweisung

ABB

ABB REL 501-C1 2.5 Produkthandbuch

ABB

ABB RET615 Bedienungsanleitung

ABB

ABB Relion REB500 Gebrauchsanweisung

ABB

ABB OVRHSP Series Bedienungsanleitung

ABB

ABB RELION 650 SERIES Bedienungsanleitung

ABB

ABB REL650 series Kurzanleitung

Beliebte Schutzvorrichtung Handbücher anderer Marken

Sola HD

Sola HD STV100K Series Bedienungsanleitung

socomec

socomec COUNTIS AMd Bedienungsanleitung

Kemo Electronic

Kemo Electronic M148-24 Bedienungsanleitung

SK ClickClick Bedienungsanleitung

Endress+Hauser

Endress+Hauser HAW569 Bedienungsanleitung

Ultrasonic

Ultrasonic SonicPRO Bedienungsanleitung

nxt

nxt BIA-nXt-DPC 1-22 Bedienungsanleitung

TFortis

TFortis SG-Switch Bedienungsanleitung

BERNINI DESIGN

BERNINI DESIGN Be172 Bedienungsanleitung

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYSET-3P-ESS-50-100 Bedienungsanleitung

GE Multilin 3 Series Bedienungsanleitung

E.K.T.

E.K.T. ke-DP01 Bedienungsanleitung

Siemens

Siemens SIPROTEC 7SD80 Bedienungsanleitung

cias

cias MICRO-RAY Bedienungsanleitung

Sungrow

Sungrow PVS-16MH Bedienungsanleitung

Reer

Reer 32010 Bedienungsanleitung

Tyco

Tyco ESFR-17 Bedienungsanleitung

Ross

Ross Opengear SRA-8901-R Bedienungsanleitung