ABB Relion 615 series Bedienungsanleitung
Relion® Protection and Control
615 series
IEC 60870-5-103 Communication Protocol
Manual
Document ID: 1MRS756710
Issued: 2010-06-11
Revision: C
Product version: 3.0
© Copyright 2010 ABB. All rights reserved
Copyright
This document and parts thereof must not be reproduced or copied without written
permission from ABB, and the contents thereof must not be imparted to a third
party, nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
Trademarks
ABB and Relion are registered trademarks of ABB Group. All other brand or
product names mentioned in this document may be trademarks or registered
trademarks of their respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
ABB Oy
Distribution Automation
P.O. Box 699
FI-65101 Vaasa, Finland
Telephone: +358 10 2211
Facsimile: +358 10 22 41094
http://www.abb.com/substationautomation
Disclaimer
The data, examples and diagrams in this manual are included solely for the concept
or product description and are not to be deemed as a statement of guaranteed
properties. All persons responsible for applying the equipment addressed in this
manual must satisfy themselves that each intended application is suitable and
acceptable, including that any applicable safety or other operational requirements
are complied with. In particular, any risks in applications where a system failure and/
or product failure would create a risk for harm to property or persons (including but
not limited to personal injuries or death) shall be the sole responsibility of the
person or entity applying the equipment, and those so responsible are hereby
requested to ensure that all measures are taken to exclude or mitigate such risks.
This document has been carefully checked by ABB but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested
to notify the manufacturer. Other than under explicit contractual commitments, in
no event shall ABB be responsible or liable for any loss or damage resulting from
the use of this manual or the application of the equipment.
Conformity
This product complies with the directive of the Council of the European
Communities on the approximation of the laws of the Member States relating to
electromagnetic compatibility (EMC Directive 2004/108/EC) and concerning
electrical equipment for use within specified voltage limits (Low-voltage directive
2006/95/EC). This conformity is the result of tests conducted by ABB in
accordance with the product standards EN 50263 and EN 60255-26 for the EMC
directive, and with the product standards EN 60255-1 and EN 60255-27 for the low
voltage directive. The IED is designed in accordance with the international
standards of the IEC 60255 series.
Table of contents
Section 1 Introduction.......................................................................3
This manual........................................................................................3
Intended audience..............................................................................3
Product documentation.......................................................................4
Product documentation set............................................................4
Document revision history.............................................................5
Related documentation..................................................................6
Symbols and conventions...................................................................6
Safety indication symbols..............................................................6
Manual conventions.......................................................................6
Section 2 IEC 60870-5-103 overview...............................................9
IEC 60870-5-103 standard.................................................................9
Documentation.................................................................................10
Section 3 Vendor-specific implementation.....................................11
615 series implementation................................................................11
Communication link..........................................................................11
Communication link setup...........................................................12
Diagnostic counters.....................................................................13
IEC 60870-5-103 process data.........................................................14
IEC 60870-5-103 data objects.....................................................14
Indications...................................................................................14
ASDU 2 type fault number and relative time data..................14
Configuring IEC 60870-5-103 indications...............................15
Class 1 event overflow...........................................................15
Chronology of Class 1 events................................................16
Class 1 data message priorities.............................................16
Controls.......................................................................................17
Circuit breaker control model.................................................17
Control operation rejections...................................................17
Measurands.................................................................................18
Class 2 measurands...............................................................18
Extended Class 2 measurand frames....................................18
Selecting Class 2 frame into use............................................19
Scaling Class 2 measurands .................................................19
Other IEC 60870-5-103 data............................................................20
Changing parameter setting group..............................................20
Device identification.....................................................................20
Device function type...............................................................20
Table of contents
615 series 1
Communication Protocol Manual
Device identification code.......................................................20
Time synchronization...................................................................21
Disturbance recorder file transfer.....................................................21
Disturbance recorder file directory (ASDU 23)............................21
Disturbance recorder channel identification................................22
Disturbance recorder tags identification......................................23
Disturbance recorder transfer......................................................23
Non-standard features......................................................................24
GI optimization.............................................................................24
Section 4 IEC 60870-5-103 parameters and diagnostics...............27
Parameter list...................................................................................27
Monitored data..................................................................................30
Section 5 Glossary.........................................................................31
Table of contents
2615 series
Communication Protocol Manual
Section 1 Introduction
1.1 This manual
The communication protocol manual describes a communication protocol
supported by the IED. The manual concentrates on vendor-specific implementations.
1.2 Intended audience
This manual addresses the communication system engineer or system integrator
responsible for pre-engineering and engineering for communication setup in a
substation from an IED perspective.
The system engineer or system integrator must have a basic knowledge of
communication in protection and control systems and thorough knowledge of the
specific communication protocol.
1MRS756710 C Section 1
Introduction
615 series 3
Communication Protocol Manual
1.3 Product documentation
1.3.1 Product documentation set
Planning & purchase
Engineering
Installing
Commissioning
Operation
Maintenance
Decommissioning
deinstalling & disposal
Application manual
Operation manual
Installation manual
Service manual
Engineering manual
Commissioning manual
Communication protocol
manual
Technical manual
Planning & purchase
Engineering
Installing
Commissioning
Operation
Maintenance
Decommissioning
deinstalling & disposal
Planning & purchase
Engineering
Installing
Commissioning
Operation
Maintenance
Decommissioning
deinstalling & disposal
Application manualApplication manual
Operation manualOperation manual
Installation manualInstallation manual
Service manualService manual
Engineering manualEngineering manual
Commissioning manualCommissioning manual
Communication protocol
manual
Communication protocol
manual
Technical manualTechnical manual
en07000220.vsd
IEC07000220 V1 EN
Figure 1: The intended use of manuals in different lifecycles
The engineering manual contains instructions on how to engineer the IEDs using
the different tools in PCM600. The manual provides instructions on how to set up a
PCM600 project and insert IEDs to the project structure. The manual also
recommends a sequence for engineering of protection and control functions, LHMI
functions as well as communication engineering for IEC 61850 and other
supported protocols.
The installation manual contains instructions on how to install the IED. The
manual provides procedures for mechanical and electrical installation. The chapters
are organized in chronological order in which the IED should be installed.
The commissioning manual contains instructions on how to commission the IED.
The manual can also be used by system engineers and maintenance personnel for
assistance during the testing phase. The manual provides procedures for checking
of external circuitry and energizing the IED, parameter setting and configuration as
Section 1 1MRS756710 C
Introduction
4615 series
Communication Protocol Manual
Andere Handbücher für Relion 615 series
41
Inhaltsverzeichnis
Andere ABB Relais Handbücher
ABB
ABB Sentry USR22 Bedienungsanleitung
ABB
ABB SDG-1T Handbuch
ABB
ABB EF19 Bedienungsanleitung
ABB
ABB Relion REC670 Kurzanleitung
ABB
ABB HU Handbuch
ABB
ABB RELION REF610 Produkthandbuch
ABB
ABB Relion 615 series Gebrauchsanweisung
ABB
ABB C6701 Bedienungsanleitung
ABB
ABB SPAJ 140 C Stücklistenhandbuch
ABB
ABB REX 521 Gebrauchs- und Pflegehandbuch
