ABB JSM D23C Bedienungsanleitung

REV. D 1/ 5

—

SAFETY PRODUCTS

Installation guide

JSM D23C Mounting kit for Magne on

sliding door

JSM D23C is a mounting kit for Magne 3 and Magne 4 to be used on sliding doors. Designed for use on

both right and left opened doors.

Installation shall be done in accordance with a risk assessment for the individual application.

Installation must be carried out by authorized personnel and in accordance with instructions in this

document and the ‘Magne Product Manual’.

Parts overview

Product ID

Description

2TLA042023R0210

JSM D23C Mounting kit Magne on sliding door

The mounting kit includes all bolts and nuts necessary to mount Magne on ABB Quick-Guard © fencing

system.

Note!

Magne, Eva,

anchor plate and cellular rubber are not included in the kit. These items

must be ordered separately

Fitting for Eva and

Anchor plate

Fitting for Magne

Tape (1x) used between

anchor plate fitting and

cellular rubber

INSTALLATION GUIDE

REV. D 2/ 5

Dimensions

All dimensions are in millimeter (mm).

Magne fitting dimensions

Eva and Anchor plate fitting dimensions

INSTALLATION GUIDE

REV. D 3/5

Orientation and mounting of Eva sensor

Depending on which Magne model used, the Eva sensor must be oriented and mounted in different ways

(see figure for details).

Magne 3 has no integrated Adam sensor, i.e. no Eva is used.

Installation tolerances (mm)

INSTALLATION GUIDE

REV. D 4/ 5

Installation and mounting

Read and understand ‘Magne Product manual’ and ‘Eden Product manual’ before starting the

installation.

Note!

In the following step by step i

nstructions, a Magne 4 is mounted on a right opened sliding

door

Mount the Magne fitting on to the fence.

Note! Orientation depends on in which

direction the door is opened.

Note! Mount the bracket near to the handle

used for opening the door.

Mount Magne on to the bracket using 2 pcs

M6x20 screws.

Note! If Magne M12-

contact (cable) should be

pointing up, use lower and center M6-installation

holes.

Pre-assemble anchor plate fitting with cellular

rubber,

tape, anchor plate and Eva.

Mount anchor plate on to the fitting using a

M8x20 screw

with thread locking paste and

tighten

it smoothly.

Insert 2 pcs DA2 distances on the backside of

Eva and mount

it on to the fitting using 2 pcs

M4x14 screws.

Note! Make sure Eva is oriented and

positioned to fit the Magne model that is used.

Note! Do not overtighten the screws. Do not

leave out DA2 distances. This can deform the

anchor plate or Eva, causing reduced or no

holding force.

Note! Attach one tape between the fitting

and cellular rubber and one tape between the

anchor plate and cellular rubber. The tape

prevents the cellular rubber and anchor plate

from rotating.

Anchor plate

and tape

M8x20

max. 3 Nm

M4x14

max. 0.5 Nm

DA2

Cellular rubber

and tape

INSTALLATION GUIDE

REV. D 5 /5

Mount anchor plate fitting on to the front edge

of the door profile.

Note! Before tightening the screws, make

sure the surfaces of Magne electromagnet and

anchor plate are completely parallel, i.e. that full

contact is obtained when the door is

closed.

To see if Magne fitting needs to be adjusted,

mount a separate door stop and close the door.

Magne and anchor plate should only

be in contact

with each other when the door is in closed

position.

Note! To prevent damages on Magne, a

separate door stop must be used.

To ensure that the function is working

correctly, open/close the door several times.

Adjust fittings if needed.

See complete product range and accessories on http://www.abb.com/jokabsafety

Inhaltsverzeichnis

Andere ABB Sicherheitsausrüstung Handbücher

ABB

ABB Stanilite Exit LED edgelit Quickfit Bedienungsanleitung

ABB

ABB RD344 Bedienungsanleitung

ABB

ABB jokab safety Smile 11EA Tina Bedienungsanleitung

ABB

ABB PrimEvo XT100E Handbuch

ABB

ABB XT230H/DALI Handbuch

ABB

ABB Nexus RF Bedienungsanleitung

ABB

ABB XT230RS/DALI Handbuch

ABB

ABB HD5-S Bedienungsanleitung

ABB

ABB Welcome Bedienungsanleitung

ABB

ABB INCA 1EC Tina Bedienungsanleitung

ABB

ABB SafeMove2 Gebrauchsanweisung

ABB

ABB Jokab Safety Safeball JSTD1 Bedienungsanleitung

ABB

ABB Thomas & Betts RH Series Bedienungsanleitung

ABB

ABB Stanilite Platinum exit LED Quickfit Bedienungsanleitung

ABB

ABB Stanilite Spitfire Standard Bedienungsanleitung

ABB

ABB Stanilite Platinum Spitfire LED weatherproof Bedienungsanleitung

ABB

ABB Tina 1A Bedienungsanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

Honeywell

Honeywell Miller H-Design DuraFlex Bedienerhandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung