ABB COM600 3.5 Bedienungsanleitung
Station Automation COM600 3.5
External OPC Server User's Manual
Contents:
1. About this manual .................................................................................. 5
1.1. Copyrights ...................................................................................... 5
1.2. Trademarks .................................................................................... 5
1.3. General .......................................................................................... 5
1.4. Document conventions .................................................................. 6
1.5. Use of symbols .............................................................................. 7
1.6. Terminology .................................................................................... 7
1.7. Abbreviations ................................................................................. 9
1.8. Document revisions ..................................................................... 10
2. Introduction ........................................................................................... 11
2.1. Functional overview ..................................................................... 11
2.2. External OPC Server features ..................................................... 12
3. Configuration ........................................................................................ 13
3.1. About this section ......................................................................... 13
3.2. Overview of configuration ............................................................ 13
3.3. Building object tree ...................................................................... 15
3.3.1. General about building object tree ................................ 15
3.3.2. Adding Gateway object ................................................. 16
3.3.3. Adding External OPC Server object .............................. 16
3.3.4. Adding External OPC Subnetwork objects .................. 16
3.3.5. Adding External OPC IED objects ............................... 16
3.3.6. Adding Logical Device objects ..................................... 17
3.3.7. Adding Logical Node objects ....................................... 17
3.3.8. Adding data objects ..................................................... 17
3.4. OPC Browser tool ........................................................................ 17
3.5. Configuring objects ...................................................................... 21
3.5.1. General about configuring objects ................................ 21
3.5.2. Configuring External OPC Server properties ................ 22
3.5.3. Configuring External OPC Server Subnetwork
properties ...................................................................... 22
3.5.4. Configuring External OPC IED Device .......................... 22
3.5.5. Configuring Logical Device properties .......................... 23
3.5.6. Configuring Logical Node properties ............................. 23
3.5.7. Configuring data objects for Internal OPC Data ............ 24
3.5.7.1. General about configuring data objects for
Internal OPC Data ...................................... 24
3.5.7.2. Integer status (INS) ................................... 25
3.5.7.3. Single point status (SPS) ........................... 25
3.5.7.4. Controllable single point (SPC) for OPC
internal data ................................................ 26
3.5.8. Configuring data objects for External OPC Client ......... 27
3
Station Automation COM600 3.51MRS757274
External OPC Server User's Manual
Issued: 30.6.2011
Version: A/30.6.2011
3.5.8.1. General about configuring data objects for
External OPC Device ................................. 27
3.5.8.2. Directional protection activation
information .................................................. 27
3.5.8.3. Protection activation information (ACT) ...... 31
3.5.8.4. Analogue set point (APC) ........................... 35
3.5.8.5. Binary counter reading (BCR) .................... 36
3.5.8.6. Binary controlled step position information
(BSC) .......................................................... 36
3.5.8.7. Complex measured value (CMV) ............... 38
3.5.8.8. Delta (DEL) ................................................. 42
3.5.8.9. Controllable double point (DPC) ................. 46
3.5.8.10. Device name plate (DPL) ........................... 48
3.5.8.11. Double point status (DPS) .......................... 49
3.5.8.12. Controllable integer status (INC) ................ 50
3.5.8.13. Integer status (INS) .................................... 51
3.5.8.14. Integer controlled step position information
(ISC) ........................................................... 51
3.5.8.15. Logical node name plate (LPL) .................. 52
3.5.8.16. Measured value (MV) ................................. 53
3.5.8.17. Controllable single point (SPC) .................. 57
3.5.8.18. Single point status (SPS) ........................... 58
3.5.8.19. WYE ........................................................... 60
3.6. Configuring DCOM ....................................................................... 68
3.6.1. Configuring DCOM ........................................................ 68
4. Operation ............................................................................................... 76
4.1. About this section ......................................................................... 76
4.2. Activating COM600 with new configurations ............................... 76
4.3. External OPC Server diagnostics ................................................ 76
4.4. Data object diagnostics ................................................................ 77
Index .............................................................................................................. 79
4
1MRS757274
Station Automation COM600 3.5
External OPC Server User's Manual
About this manual1.
Copyrights1.1.
The information in this document is subject to change without notice and should not be
construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for any
errors that may appear in this document.
In no event shallABB Oy be liable for direct, indirect, special, incidental, or consequential
damages of any nature or kind arising from the use of this document, nor shallABB Oy
be liable for incidental or consequential damages arising from use of any software or
hardware described in this document.
This document and parts thereof must not be reproduced or copied without written per-
mission from ABB Oy, and the contents thereof must not be imparted to a third party
nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license.
©Copyright 2011 ABB. All rights reserved.
Trademarks1.2.
ABB is a registered trademark ofABB Group. All other brand or product names men-
tioned in this document may be trademarks or registered trademarks of their respective
holders.
General1.3.
This manual provides thorough information on the External OPC Server and the central
concepts related to it.You find instructions on how to configure External OPC Server
related objects. The basic operation procedures are also discussed.
Information in this user’s manual is intended for application engineers who configure
the External OPC Server.
This user’s manual is divided into following sections:
Introduction
This section gives an overview of the External OPC Server and its features.
5
Station Automation COM600 3.5
1MRS757274
External OPC Server User's Manual
Configuration
In this section you will find an overview of configuration.You are given instructions
on how to configure External OPC Server related objects and the model of a substation
or system.
Operation
This section covers the basic operation procedures you can carry out when transferring
or activating Station Automation COM600 (later referred to as COM600) with new
configurations.
Document conventions1.4.
The following conventions are used for the presentation of material:
•The words in names of screen elements (for example, the title in the title bar of a
window, the label for a field of a dialog box) are initially capitalized.
•Capital letters are used for the name of a keyboard key if it is labeled on the keyboard.
For example, press the ENTER key.
•Lowercase letters are used for the name of a keyboard key that is not labeled on the
keyboard. For example, the space bar, comma key, and so on.
•Press CTRL+C indicates that you must hold down the CTRL key while pressing
the C key (to copy a selected object in this case).
•Press ESC E C indicates that you press and release each key in sequence (to copy
a selected object in this case).
•The names of push and toggle buttons are boldfaced. For example, click OK.
•The names of menus and menu items are boldfaced. For example, the File menu.
•The following convention is used for menu operations: MenuName > Menu-
Item > CascadedMenuItem. For example: select File > New > Type.
•The Start menu name always refers to the Start menu on theWindows taskbar.
•System prompts/messages and user responses/input are shown in the Courier font.
For example, if you enter a value out of range, the following message is displayed:
Entered value is not valid. The value must be 0 - 30 .
•You can be asked to enter the string MIF349 in a field. The string is shown as follows
in the procedure:
MIF349
•Variables are shown using lowercase letters:
sequence name
6
1MRS757274
Station Automation COM600 3.5
External OPC Server User's Manual
Use of symbols1.5.
This publication includes warning, caution, and information icons that point out safety-
related conditions or other important information. It also includes tip icons to point out
useful information to the reader. The corresponding icons should be interpreted as follows.
The electrical warning icon indicates the presence of a hazard
which could result in electrical shock.
The warning icon indicates the presence of a hazard which
could result in personal injury.
The caution icon indicates important information or warning
related to the concept discussed in the text. It may indicate
the presence of a hazard which could result in corruption of
software or damage to equipment or property.
The information icon alerts the reader to relevant facts and
conditions.
The tip icon indicates advice on, for example, how to design
your project or how to use a certain function.
Terminology1.6.
The following is a list of terms associated with COM600 that you should be familiar
with. The list contains terms that are unique toABB or have a usage or definition that
is different from standard industry usage.
DescriptionTerm
An abnormal state of a condition.Alarm
An OPC service for providing information about alarms and
events to OPC clients.
Alarms and Events; AE
An OPC service for providing information about process data to
OPC clients.
Data Access; DA
7
Station Automation COM600 3.5
1MRS757274
External OPC Server User's Manual
DescriptionTerm
Part of a logical node object representing specific information,
for example, status, or measurement. From an object-oriented
point of view, a data object is an instance of a class data object.
DOs are normally used as transaction objects; that is, they are
data structures.
Data Object; DO
The data set is the content basis for reporting and logging. The
data set contains references to the data and data attribute val-
ues.
Data Set
A physical device that behaves as its own communication node
in the network, for example, protection relay.
Device
Change of process data or an OPC internal value. Normally, an
event consists of value, quality, and timestamp.
Event
A physical IEC 61850 device that behaves as its own commu-
nication node in the IEC 61850 protocol.
Intelligent Electronic Device
Representation of a group of functions. Each function is defined
as a logical node. A physical device consists of one or several
LDs.
Logical Device; LD
The smallest part of a function that exchanges data. An LN is
an object defined by its data and methods.
Logical Node; LN
A communication protocol developed by Echelon.LON
A proprietary method of ABB on top of the standard LON pro-
tocol.
LON Application Guideline for
substation automation; LAG
Series of standards specifications aiming at open connectivity
in industrial automation and the enterprise systems that support
industry.
OPC
Representation of a connection to the data source within the
OPC server. An OPC item is identified by a string <object
path>:<property name>. Associated with each OPC item are
Value, Quality, and Time Stamp.
OPC item
Named data item.Property
The report control block controls the reporting processes for
event data as they occur. The reporting process continues as
long as the communication is available.
Report Control Block
ABB proprietary communication protocol used in substation
automation.
SPA
Protection and/or Control Product supporting the SPA protocol
version 2.5 or earlier.
SPA device
XML-based description language for configurations of electrical
substation IEDs. Defined in IEC 61850 standard.
Substation Configuration Lan-
guage; SCL
8
1MRS757274
Station Automation COM600 3.5
External OPC Server User's Manual
Abbreviations1.7.
The following is a list of abbreviations associated with COM600 that you should be
familiar with. See also 1.6, Terminology.
DescriptionAbbreviation
Alarms and EventsAE
Application Service Data UnitASDU
Buffered Report Control BlockBRCB
Data AccessDA
Data Message Code DefinitionDMCD
Data ObjectDO
Gateway, component connecting two communication networks togetherGW
Human Machine InterfaceHMI
International Electrotechnical CommissionIEC
Intelligent Electronic DeviceIED
LON Application Guideline for substation automationLAG
Local Area NetworkLAN
Logical DeviceLD
LonMark interoperable device communicating in LonWorks network. In
this document, the term is used for devices that do not support the ABB
LON/LAG communication.
LMK
Logical NodeLN
LON SPA GatewayLSG
Network Control CenterNCC
Norwegian User ConventionNUC
Network VariableNV
Object Linking and EmbeddingOLE
OLE for Process ControlOPC
Protection & ControlP&C
Request To SendRTS
Substation AutomationSA
Station Automation Builder 600SAB600
Substation Configuration LanguageSCL
Single Line DiagramSLD
Simple Network Management ProtocolSNMP
Simple Network Time ProtocolSNTP
9
Station Automation COM600 3.5
1MRS757274
External OPC Server User's Manual
DescriptionAbbreviation
Simple Object Access ProtocolSOAP
Report Control BlockRCB
Unbuffered Report Control BlockURCB
eXtended Markup LanguageXML
Document revisions1.8.
HistoryProduct revisionDocument version/date
Document created3.5A/30.6.2011
10
1MRS757274
Station Automation COM600 3.5
External OPC Server User's Manual
Inhaltsverzeichnis
Andere ABB Server Handbücher
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung