ABB LLT100 Bedienungsanleitung

—

ABB MEASUREMENT & ANALYTICS | COMMISSIONING INSTRUCTION

LLT100

Laser level transmitter

Quick start instructions for

LLT100 laser level transmitter

Measurement made easy

Introduction

The LLT100 is a high performance laser level

transmitter that accurately measures level, distance,

and position over long ranges in industrial

environments. The LLT100, using an eye-safe pulsed

laser beam, features advanced timing and

sophisticated signal processing for pinpoint

accuracy.

Features

• Range up to: 100 m (330 ft) for level of solids /

30 m (100 ft) for level of liquids / 200 m (660 ft)

for positioning applications

• Narrow, easy-to-aim laser beam

• Measures solid surface even at wide angles

• Measures liquid levels even for clear liquids

• Robust aluminum or stainless steel enclosure

• Easy and intuitive setup / no calibration required

• Explosion proof class 1 / division 1 (zone 1)

• 2-wire power from the 4 to 20 mA loop

• HART communication

• Embedded HMI / Display

For more information

Further publications for LLT100 transmitters are

available for free download from:

www.abb.com/laserlevel

Search for or click on:

Product –

Data Sheet DS/L LT10 0 - EN

Product

Operating Instruction O I/ LLT10 0 - EN

—

PInpoint accuracy using

eye-safe pulsed laser

beam technology

LLT100 |LASER LEVEL TRANSMITTER | CI/LLT100-EN REV. A

1 Health & Safety

WARNING

Bodily injury

Read the LLT100 Operating Instruction OI/LLT100 - EN

carefully before working with the product.

For personal and system safety, and for optimum

performance, make sure that you thoroughly understand

the contents before installing, using or maintaining this

instrument.

NOTICE

• All servicing of the equipment is to be performed at

factory by qualified service personnel only.

• No user / operator adjustments inside the LLT100 level

transmitter are recommended by the manufacturer.

Product labels

Symbols that appear on this product are shown below::

Protective earth (ground) terminal.

Direct current supply only.

2 Electrical connection

HART terminal – 2 wires

Internal protective earth

(ground)

Cover lock screw M4

Positive (+)

Negative (–)

*Optional external

meter (+)

External ground

termination point

HART terminal with heater option –

2 + 2 wires

Internal protective earth

(ground)

External DC supply:

+24 V DC, 3 W

Cover lock screw M4

0 V (return)

Positive (+)

Negative (–)

*Optional external

meter (+)

External ground

termination point

Attention – location of ground

The Ground symbols is used to identify protective

earth conductor terminals.

Attention – direct current

Use wires and cable glands rated 90 °C (194 °F) minimum.

LLT100 |LASER LEVEL TRANSMITTER | CI/LLT100-EN REV. A

3 Mounting

Install away from falling

material for easiest

configuration

For solids laser beam can

be aimed at any angle

Also typically applies to other

scattering surfaces such as

slurries and some turbulent

liquids

For typical liquid applications

laser beam must be as

perpendicular as possible,

not exceeding 90° ± 5° to

the surface

4 Easy setup

1 Rotate the housing: unscrew the stop tang-screw by

approximately 1 rotation (do not pull it out) before removing

the housing. When the desired position is reached,

re-tighten the stop tang-screw.

2 Connect the cables (15.5 to 42 V DC) to the LLT100 laser level

transmitter – if using HART the minimum input voltage is

21 V DC.

3 Power on the transmitter.

4 Press the Right arrow key ( ) on the display and select your

access level using the Up and Down arrow keys ( ).

5 Set the main parameters at the Easy Setup menu:

a Select the required language.

b Select the measurement mode:

standard, clear liquid, positioning or dust/vapor.

c Enter the vessel height (URP).

d Set the sensor offset from the vessel top.

e Select the primary variable (PV) for the 4 to 20 mA output:

level, ullage, volume.

f Choose the unit of the primary variable (PV):

m, cm, mm, ft.

g Set the value for vessel empty (LRV).

h Set the value for vessel full (URV).

i Enable or disable the filling rate.

j Enter the Tag name.

6 Once the settings are completed, press Exit to return to the

Distance view.

Refer to Operating Instruction OI/LLT100 -EN for detailed

configuration / setup information.

Exit Select

Easy Setup

CI/LLT100-EN Rev. A 12.2017

—

We reserve the right to make technical

changes or modify the contents of this

document without prior notice. With

regard to purchase orders, the agreed

particulars shall prevail. ABB does not

accept any responsibility whatsoever for

potential errors or possible lack of

information in this document.

We reserve all rights in this document and

in the subject matter and illustrations

contained therein. Any reproduction,

disclosure to third parties or utilization of

its contents – in whole or in parts – is

forbidden without prior written consent

of ABB.

—

ABB Inc.

Measurement & Analytics

Level Measurement Products

3400, Rue Pierre-Ardouin

Québec (Québec) G1P 0B2

Canada

Tel.: +1 800 858-3847 (North America)

Tel.: +1 418 877-2944 (other countries)

Fax: +1 418 877-2834

email: Lasers@ca.abb.com

abb.com/measurement

5 General model

Sensor

offset

Vessel

height

(URP)

Level

Ullage

Vessel full

(20 mA)

(URV)

Vessel empty

(4 mA)

(LRV)

6 Specification

Environmental conditions

Operating temperature

–40 to 60°C (–40 to 140°F),

up to 280°C (535°F)

with cooling tube

Altitude

Up to 2000 m (6561 ft.)

Relative humidity

0 to 100%

Electrical equipment

Class III

Pollution degree

4 (IP66 / IP67 / Type 4X)

Overvoltage

Category 1

Output

Analog

4 to 20 mA, NAMUR compliant

Digital

HART 7 (multi-variable output)

Communication

Local HMI, EDD / DTM, handheld

Power supply

Powered from the loop

4 to 20 mA, 15.5 to 42 V DC

Heated lens option

24 V DC (3W)

Andere Handbücher für LLT100

Inhaltsverzeichnis

Andere ABB Sender Handbücher

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung

Excalibur

Excalibur SoundMaster FM Transmitter 144 Bedienungsanleitung