Abbott IonicRF Bedienungsanleitung
IonicRF™ Generator Pole Mount
Model RF-POLE
Instructions for Use
CAUTION: Federal (USA) law restricts this device to sale by or on the order of a physician.
™ Indicates a trademark of the Abbo group of companies.
‡ Indicates a third-party trademark, which is property of its respecve owner.
Pat. hp://www.abbo.com/patents
© 2021 Abbo. All Rights Reserved.
Contents
Product Descripon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Intended Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Indicaons for Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Contraindicaons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Clinical Benet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Precauons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Adverse Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Compability Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pole Mount Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preparing to Use the Pole Mount. . . . . . . . . . . . . . . . . . . . . . . 4
Step 1: Aach the Pole Mount to the Roll Stand. . . . . . . . . . . . . . . 4
Step 2: Remove the Countertop Stand. . . . . . . . . . . . . . . . . . . . . . . 6
Step 3: Aach the Generator to the Pole Mount. . . . . . . . . . . . . . . 7
Cleaning Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Incident Reporng. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols and Denions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Addional Symbols for Product Labels. . . . . . . . . . . . . . . . . . . . . . 11
Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Warranty Informaon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
i
Product Descripon
The IonicRF™ generator pole mount is a bracket that provides a
method of mounng the IonicRF™ generator on a compable
equipment pole (roll stand).
Intended Use
The IonicRF™ generator pole mount (hereaer referred to as the "pole
mount") is an accessory that is intended to be used to secure the
IonicRF™ generator to a compable roll stand.
Indicaons for Use
For informaon such as indicaons for use, refer to the clinician's
manual for the IonicRF™ generator.
Contraindicaons
For informaon related to contraindicaons, refer to the clinician's
manual for the IonicRF™ generator.
Clinical Benet
As an accessory, the IonicRF™ generator pole mount contributes to the
intended clinical benet of the compable IonicRF™ generator.
Warnings
The following warnings apply to these components:
▪Before attaching the generator, ensure the pole mount is▪
securely fastened to the roll stand. Failing to secure the pole
mount may cause the product to fall, resulting in injury or
product damage.
▪Before starting a procedure, ensure the generator is
▪
fastened securely to the pole mount. Failing to secure the
1
generator may cause the product to fall, resulting in injury or
product damage.
▪When installed, ensure the top of the generator is no higher▪
than 139.7 cm (55 in) from the floor.
▪Do not mount or suspend any item on the roll stand other▪
than the pole mount and generator.
▪Do not place any items exceeding 4.4 pounds (2 kilograms)▪
on the roll stand tray.
▪Unlock the roll stand wheels before moving the pole-▪
mounted generator.
▪Pulling on the roll stand when the wheels are locked may
▪
cause the roll stand to tip or fall, which may cause injury or
interrupt the procedure.
Precauons
The following precauons apply to these components:
▪Only use the IonicRF™ pole mount with the IonicRF™▪
generator model RFG‑IONIC and the roll stand
model RD‑0856.
▪Before moving the roll stand with the generator attached or▪
using the pole-mounted generator, ensure that any cables
attached to the generator will not become entangled with
other objects or present a tripping hazard.
▪Two people are required to assemble the generator and pole
▪
mount to prevent the product from falling, resulting in injury
or product damage.
▪The roll stand assembly requires two people.
▪
▪Observe caution when moving the pole-mounted generator
▪
to avoid toppling of the device which may cause injury or
product damage.
2
Adverse Events
Supercial ssue injury may occur if the pole mount is not installed
and used according to this manual.
Compability Guidelines
Only the following products may be used with the IonicRF™ generator
pole mount (model RF‑POLE):
Product Model
IonicRF™ generator RFG‑IONIC
Roll stand RD‑0856
Pole Mount Components
The following gure provides informaon about the pole mount
components.
Figure 1. Pole mount shown with compable roll stand
Pole Mount
1. Pole mount clamp base
2. Capve thumb screws (4)
3. Pole mount clamp cap
4. Cap-head screws (2)
5. Hex drive screwdriver
(5 mm)
Roll Stand (packaged separately)
6. Tray
7. Pole
8. Wheels (3 non‑locking,
3 locking)
3
Preparing to Use the Pole Mount
The IonicRF™ generator is portable and can be placed on a level
surface using the countertop stand or mounted to a compable roll
stand using the IonicRF™ generator pole mount.
To use the pole mount with the IonicRF generator, follow the steps in
this secon.
NOTE: This assembly requires two people.
Step 1: Aach the Pole Mount to the Roll
Stand
NOTE: The roll stand must be assembled before use. For informaon
about assembling the roll stand, refer to the assembly instrucons
for that product.
Figure 2. Locking the wheels on the roll stand
1. Locked
2. Unlocked
1. Lock the wheels on the roll stand by pressing down on the
1.
three black brakes.
4
Figure 3. Placing the pole mount on the pole
2. Slide the pole mount onto the pole unl the top of the pole2.
mount clamp is below the boom edge of the black pole cap.
NOTE: The top of the pole mount clamp should be at least
1.2 cm below the top of the pole. When installed, ensure the
top of the generator is no higher than 139.7 cm (55 in) from the
oor.
Figure 4. Tightening the cap-head screws
1. Top of pole mount clamp
placed at least 1.2 cm
(0.5 in) below the boom
edge of the black pole cap
3. Using the screwdriver included in the kit, ghten the cap-head
3.
screws, alternang between the two, unl the pole mount
clamp base is rmly aached to the clamp cap.
5
WARNING: Ensure the pole mount is securely fastened to the
pole before aaching the generator. Failing to secure the pole
mount may cause the product to fall, resulng in injury or
product damage.
Step 2: Remove the Countertop Stand
NOTE: The IonicRF™ generator is supplied with an aached
countertop stand. Before aaching the generator to the pole mount,
the countertop stand must be removed. Always place the generator
on a level surface when adding or removing the countertop stand.
Figure 5. Removing the countertop stand from the generator
1. Using your ngers, fully loosen each of the four capve thumb
1.
screws on the countertop stand unl they are disengaged from
the generator.
2. Remove the stand from the generator.
2.
6
Step 3: Aach the Generator to the Pole
Mount
NOTE: Aaching the generator requires two people—one to hold the
generator in posion and one to aach the generator.
1. Person 1: Lock the wheels on the roll stand.
1.
2. Person 1: Ensure that the pole mount is fastened securely to
2.
the pole.
Figure 6. Aligning the screw holes with the capve thumb screws
1. Generator
2. Pole mount
3. Pole
4. Screw holes
5. Capve thumb screws
3. Person 1: Hold the generator in place.
3.
Person 2: Align the four screw holes on the back of the
generator with the capve thumb screws on the pole mount.
7
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Abbott Rack & Stand Handbücher
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
