Assembly Instructions Figure 1
STEP 2
Connect 1 Side Bend (#3) onto each end of
Bottom Bend (#1) using 4 Hex bolts (#10), 4
Washers (#11), 4 Lock nuts (#12). See Detail C.
STEP 1
Connect 1 Support Leg (#5) onto each end of
Middle Bend (#2) using 4 Hex bolts (#10), 4
Washers (#11), 4 Lock nuts (#12). See Detail A.
Connect Foot plate (#6) to Support Leg (#5),
using one hex bolt 4 Hex bolts (#10), 4 Washers
(#11), 8 Lock nuts (#12). See Detail B.
STEP 3
Place 2 Brace (#4) onto support leg (#5), align
the hole in Brace with the hole in Support Leg,
Connect C frame assembled in Step 2 to
Support leg (#5) using 2 Hex bolts (#7), 2
Washers (#8) and 2 Lock nuts (#9).
STEP 4
Repeat Step 3 for the other C frame.
See Figure 4.
Connect 2 C frame together with two
Braces (#4), using 4 Hex bolts (#10), 4
washers (#11) and 4 Lock nuts (#12).
Tie 1 Rope(#13) to C frames, rest Rope
on the top of Brace.
A
B
Detail A
Detail B
Detail C
2
2
5
5
5
5
6
6
6
5
5
2
10
10
11
12
11
12
Figure 2
C
3
3
3
1
110
11
12
D
Detail D
Figure 3
C Frame
3
4
9
8
1
7
5
E
Detail E
C frame
3412 11 10
3
Figure 4
Figure 5
Rope
page 2
10 10 Rev 300 1-.-
#21208 instructions
STEP 4
Tie Rope(#13) to Side tubes in the front only
(#2),This will make the snow and rain slide off
easy and makes the cover look better on the log
rack.
