200 Fitting 90 deg. 850.0037
201 T-piece (to connect 2 torches) 850.0189
203 L-connector (to connect 2 torches) 850.0235
204 Water flow cutt-off switch 850.0033
1. As coolant for all liquid-cooled torch systems, we recommend the special BINZEL coolant BTC-15,
which remains liquid down to -15°C.
Features of BINZEL Coolant BTC-15:
• Non-conductive with regard to no-load voltages and operating voltages, in the sense of welding
technology.
• Important for all torches using HF, and/or using two potentials, such as plasma torches and for all
grounded, metallic coolant tanks.
• Prevents electrolytic corrosion when using torches made from different metals and torches with small
diameter cooling channels.
• Increases life of torch, cable assembly, pump and cooler.
• Non-toxic for humans and safe for the environment (see data sheet).
2. Must be used in conjunction with an adequate motor protection device.
3. A water flow cut-off switch (850.0033) is recommended for each torch when MIG welding to protect
the torch from overheating in the event of insufficient liquid flow.
Please note that the pump and motor will not be covered by warranty as variables such as coolant quality,
purity and coolant level, as well as the proper installation according to 2. and 3. are beyond our control.
Type: WK 23
Heat exchanger: 2-row
Immersion pump 50 Hz
(protection class IP 54):
– pump capacity: Qmax 35 l/min
– pump discharge: Hmax 32 m
Immersion pump 60 Hz
(protection class IP 54):
– pump capacity: Qmax 40 l/min
– pump discharge: Hmax 32 m
Cooling capacity
(RT=22° C): 1250 W at max. flow
1050 W at 1 l/min
Measures (WxDxL): 253x270x460 mm
Weight: 17 kg
Tank capacity: 7 l
WK 43
4-row
Qmax 35 l/min
Hmax 32 m
Qmax 40 l/min
Hmax 32 m
1575 W at max. flow
1320 W at 1 l/min
253x270x516 mm
18 kg
7 l
Technical data
Operating
instructions
Accessories
Pos. Description Specifications Order-no.Build group
