Abrahamsen VRC-1 Bedienungsanleitung
UK
V1.0
Owner’s Manual Page 5
Bruksanvisning Side 18
N
Owner_V1.0_v1.2 Copyright © ECS Holding AS, 2007
Register your product with
ABRAHAMSEN© and expand
your warranty from two(2) to
fi ve(5) years. Use the included
registration form or register on-
line at www.abrahamsenaudio.
com. For fastest processing,
we recommend online registra-
tion. When we receive your
registration, we will send you a
warranty card.
Warranty certifi cate
Use this information to register your product.
Bruk denne informasjonen til å registrere ditt produkt.
2
Registrer ditt produkt hos
ABRAHAMSEN© og utvid
garantien fra to(2) til fem(5)
år. Bruk det vedlagte registre-
ringsskjema eller gå online på
www.abrahamsenaudio.com.
Raskeste måte vil være å gjøre
det online. Når vi har mottatt
din registrering, vill vi sende
deg et garantikort.
Quality inspection
Thank you for chosing this ABRAHAMSEN© product. You will enjoy years of listening pleasure and true High End musical performance from your
audio system. The signatures shown below certify that this product met or exceeded our strict standards.
Takk for at du har valgt et produkt fra ABRAHAMSEN©. Du kommer til å nyte mange år med lytteopplevelse og ekte “High End” musikkgjengivelse
fra ditt lydsystem. Underskriftene under viser at dette produktet møtte eller overgikk våre strenge standarer.
Electric performance:_________________ Listening:_________________ Final inspection:_________________
Per Abrahamsen Designer
3
We strongly believes that uncompromising quality is not an option--it’s an obligation.
Maintenance interval
Adjustment: Cleaning: 5000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 30000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 10000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 15000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 20000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 25000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 35000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 40000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 45000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
Adjustment: Cleaning: 50000Hours
Idling Connectors
DC PCB Date/Sign/Stamp
4
User and Quality Inspection Manual
UK
V1.0 CD PLAYER
Warning:
To avoid risk of fire or electric shock, do not expose this
appliance to rain or moisture. Verify line voltage before use.
Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service
personnel.The warranty is void if the product is tampered with by non-authorised
personnel.Use only authorised ABRAHAMSEN© service center.
6
Introduction
This user manual contains important information on the pla-
cement, installation, and operation of your ABRAHAMSEN©
product. Please read this information thoroughly. A good
understanding of these details will help ensure satisfactory
operation and long life for your product.
The story behind the sound.
In 1972 Dr. Otala and Mr. Lohstro fi nished their work in
analysing transistor amplifi ers to determine what actually
created the ”transistor sound” in general transistorized
designs. The results of their innovative design work were
incorporated in the legendary 25 watt amplifi er.
This product was the fi rst commercial transistor amplifi er
to use this new design approach, and the amplifi er was
immediately recognised as dramatically more musical and
dynamic sounding than any other transistor amplifi er. The
same design philosophy has been constantly updated by
additional research and development. This philosophy forms
the basis of the new ABRAHAMSEN© design.
After the 25 watt amplifi er had established a new standard
for transistor amplifi ers, research was undertaken to fi nd
ways to make the amplifi er even better, and to extend its
highly musical sound quality to more powerful amplifi er
design.
Unpacking the V1.0
Immediately upon receipt of the V1.0, inspect the carton
for possible damage during shipment. The carton and pac-
kaging have been designed to provide the safest possible
protection for the transport of your amplifi er. Unpack the unit
carefully. Save all packaging materials for future shipment.
The contents of the carton
1 pcs ABRAHAMSEN© V1.0
1 pcs AC mains cord
1 pcs Owners manual
1 pcs Spare fuse
(located in the fuse drawer, mains inlet. See page 14)
If any of the items mentioned above are not included in the
carton, please contact your authorized ABRAHAMSEN©
dealer, distributor, or ECS Holding AS for assistance.
Setup procedure
Before connecting the V1.0 to the mains, check that the
mains voltage indicated on the rear panel corresponds to
the line voltage in the territory you intend to use the unit.
Before connection 7
How to avoid damages
Do not under any circumstances connect or disconnect equip-
ment when power is turned on. The design of the RCA plug
generates a huge transient when inserted. Connecting or dis-
connecting equipment with the power on can result in severe
damage to both speaker and amplifi er.
How to avoid noise problems
The V1.0 contains delicate circuits that are sensitive to mag-
netic strayfi elds. The unit should not be placed near mains
transformers, TV sets etc. Care should be taken regarding
placement of the interconnect cables. Do not run interconnect
cables in parallel with mains cords or speaker cables. Keep
interconnect and speaker cables as short as possible.
How to avoid antenna problems
In some set-ups hum may occur when you connect the radio,
VCR or TV to your system. The problem is caused by DC
voltage coming from your antenna. Please contact your cable
network operator.
How to remove and un secure transport necessitis
Remove the wing bolt located underneath the product.
!Important!
Keep the wing bolt in a safe place for future use. Always
tighten the wing bolt when moving the CD player. If not
securely fastened, the CD player will be severely damaged,
resulting in void of warranty. Do not over-tighten the wing
bolt.
REMOVE
A B R A H M S E N
Installation and connection
How to connect your CD-player
Please read these pages carefully.(page 8 to 10)
Do not under any circumstances connect or disconnect equipment when the power is turned on.
8
Balanced operation
CD-player
Preamplifi er/Integrated Amplifi er
Installation and connection 9
Singel-ended operation
CD-player
Preamplifi er/Integrated Amplifi er
Installation and connection 10
Digital out operation
CD-player
Preamplifi er/Integrated Amplifi er
D/A Converter
Inhaltsverzeichnis
Sprachen:
