Abtus AV813 Bedienungsanleitung
ABtUS SINGAPORE PTE LTD www.abtussingapore.com
ABtUS SIGAPORE PTE LTD www.abtussingapore.com
Universal Projector
Ceiling Mount
Model: AV813
Revision 0Patent Pending
User Operation Guide
This symbol indicates the incorrect handling. Ignoring this symbol can result in the possibility of personal
injury and physical damage.
This symbol indicates the incorrect handling. Ignoring this symbol can result in the possibility of personal
injury or even death.
IMPORTANT NOTES
●Thank you for purchasing the Universal Projector Ceiling Mount. This bracket is suitable for about
80% to 90% of projectors up to load of 20kg (44 lbs)
●To ensure correct usage, please read this instruction manual thoroughly. Keep this manual for future
reference.
●BRACKETS SHOULD BE MOUNTED ONLY BY A QUALIFIED INSTALLER.
●User will be responsible for any injuries and damages tat may arise from improper installation and
handing of Universal Ceiling Mounting Kit.
●Ensure all mounting screws are appropriately positioned and properly tightedned/ fastened.
●Installers are to ensure customer’s safety during installtion.
●We reserve the right to amend or undertake any necessary changes without prior notice.
CAUTION
WARNING
This symbol indicates additional cautions (including warnings).
This symbol indicates forbidden actions.
This symbol indicates required actions.
Causion
(general)
Forbidden
(general)
Required
(general)
*Specifications are subject to changes without notice.
PARTS SPECIFICATIONS
User Operation Guide
PACKAGE CONTENTS
Assembling without the correct use bolts
and screws at designated points may result
in injury and damage to properties or the
unit collapsing from its installed position.
All bolts and screws must be used as per
installation instructions.
Check and ensure he ceiling where
you install can support the weight or the
projector and ceiling mounting.
Steps should be taken to ensure the
ceiling and installed unit can withstand
external forces like earthquakers,
vibrations, etc.
All Ceiling Mounting Brackets are to
firmly secured so the unit will not drop off
its installed position.
Do not install near an air conditioner or
where there is excessive dust and smoke.
Do not install in location where room
temperature and humidity are excessively
high ro prevent fire.
To prevent firem, avoid contact with
water.
*Specifications are subject to changes without notice.
WARNING
Do not place on sloping surface Strictly
install on a horizontal surface only.
Keep the room well ventilated to prevent
room temperature rising and possibilities
resulting in fire.
Ensure the Projector is mounted so that
it is not possible for undue load to be put
on the bracket.
COMPONENT CHECKLIST
1. Each package should contain the parts listed and shown below
Part 1
Mounting Plate........ 1 pc
Part 2
Fixing Coupler........ 1 pc
Part 3
Top Column........ 1 pc
Part 5
Bottom Column........ 1 pc
Part 7
Bottom Spacer........ 4 pcs
Part 8
Square Nut........ 4 pcs
Part 4
Mid Column........ 1 pc
Part 6
Locking Hook........ 1 pc
Part 9
Universal Head Assembly........ 1 pc
*Specifications are subject to changes without notice.
COMPONENT CHECKLIST
Part 10
M5 x 10
Socket Button Cap Screw........ 4 pcs
Part 11
M8 Self Locking
Nylon Nut ......................... 8 pcs
Part 12
Extension Bracket
75mm.......... 2 pcs
150mm........ 2 pcs
Part 13
Truss Head Screw
M2. 6x15 M3x15 M3x20 ....... 4 pcs each
M4x15/M4x20/M4x25.............. 4 pcs each
M5x15/M5x20/M5x25.............. 4 pcs each
M6x15/M6x20/M6x25.............. 4 pcs each
Part 14
M8 x 50
Socket Cap Screw........ 8 pcs
Part 15
Washer
1mm ................... 4 pcs
2mm ................... 4 pcs
4mm ................... 4 pcs
Part 16
Allen Key
Ф3 ................... 1 pc
Ф6 ................... 1 pc
Part 17
Washer
Ф3 washer ................... 4 pcs each
INSTALLATION GUIDE
1. Assembly procedure- Installtion of Suspension Rod
1.2
Install Top Column with M8x50 socket
Cap Screw and M8 Self-Locking Nylon
Nut, fix Mounting Plate and Fixing
Coupler togather.
1.4
Install Bottom Column. First align two
holes on the Mid Column at the suitable
holes on the Bottom Column, and tighten
them with M8x50 Socket Cap Screw and
M8 Self-Locking Nylon Nut.
Refer to drawing.
1.1
Install Mounting Plate and Fixing
Coupler.
1.3
Install Mid Column. First align two holes
on the Mid Column at the suitable holes
on the Top Column, tighten them with
M8x50 Socket Cap Screw and M8 Self-
Locking Nylon nut.
Refer to drawing.
*Specifications are subject to changes without notice.
INSTALLATION GUIDE
2. Parts Assembly - Installation of Universal Base
2.2
Lift the Projector with both middle finger
along the depth of the Projector to
search for the Cental of gravity (CG).
2.4
Locate the Projector CG position and
determine screw size for mounting the
Projector by placing the Universal head
Assembly near to the Projector CG
found in step-2.3.
2.6
Change to a shorter or longer
Extension Brackets provided in the
package if needed. There are 2 sizes
availalble as shown.
2.1
Lift the Projector with both middle finger
along the depth od the Projector to
search for the Central of Gravity (CG).
2.3
When the CG Point (Depth of Projector)
and (Width of Projector) intersection
meet, that will be the assume CG of
Projector
2.5
Loosen and slide the Extension
Brackets on the Universal Head
Assembly and align them to the
Projector mounting holes.
CG of Projector CG Point
(Width of Projector)
Extension Bracket - 75 mm
Extension Bracket -150 mm
CG Point
(Depth of Projector)
INSTALLATION GUIDE
2.8
Use the Tress head screws provided in
the package to tighten the Extension
Brackets to the Projector.
2.7
Assemble the selected Extension
Bracket with the following items:
Bottom Spacer, Spacer (if needed) &
Square Nut.
For Extension Bracket more than 50mm
(1.97”) (Square Nut x 2 )
2.9
Lift up the Projector to check the CG of
the assembled Projector and tighten all
the screws once confirmed.
The assembly is then completed.
Bottom Spacer
Bottom Spacer
Spacer of
Various Size
Spacer of
Various Size
Inhaltsverzeichnis
Andere Abtus Rack & Stand Handbücher
Abtus
Abtus AV508-S Bedienungsanleitung
Abtus
Abtus AV-891-610 Bedienungsanleitung
Abtus
Abtus AV483-L360A Bedienungsanleitung
Abtus
Abtus AV380-E Bedienungsanleitung
Abtus
Abtus AV608-F Bedienungsanleitung
Abtus
Abtus AV541 Bedienungsanleitung
Abtus
Abtus AV546-W2 Bedienungsanleitung
Abtus
Abtus AV389B Bedienungsanleitung
Abtus
Abtus AV608-T Bedienungsanleitung
Abtus
Abtus AV544 Bedienungsanleitung
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
