1.
Featuresintroductions
All-in-one design far easy installation. The lock itself would not haveany residual
magnetism.
Adjustable width (59mm-89mm) far useof different sliding doors' slots.
Armature bracket which can beadjusted horizontally or vertically for betterfitting.
Voltage inputdesigntofitallsliding doors (DC12V).
The lock itself is equipped with release switch and indicator for better maintenance of
the sliding doors.
Built-in photocoupler connects with egress delay circuit push button point.
Maximum holding force of 80kg/ 175 lbs.
Currents: 150mA{dependingonDC12Vtesting).
Dimensions:
Magnetic lockbody:118 mm (L)x 66mm (W) x 53.5mm (H).
Armature: 63mm (L) x38mm (W)x 126.5mm (H).
Totalweight:1.25kg.
2.
Modelseries
5PIN connector without lockstatus point.
7PIN connector with lockstatus point.
3. Panel
3PIN connector: To set either 110V or 220 V
5 PIN connector: DC12, external push button,
triggers to open door.
7 PIN connector: DC12 V, external push
button, triggers to pen door, lock status point.
Release switch: For better maintenance of
sliding door.
Indicator (red):
Normal state: Blinking
Door opening: Light on
