Accton Technology EC3002 Bedienungsanleitung

Media Converter — EC3002

Installation Guide

FTTH Media Converter

EC3002

with One Fixed 100BASE-FX Single-Fiber Line Connection,

and One 10BASE-T / 100BASE-TX (RJ-45) Port

Accton is a trademark of Accton Technology Corporation. Other trademarks or brand names mentioned

herein are trademarks or registered trademarks of their respective companies.

International Headquarters

No. 1 Creation Road III,

Science-based Industrial Park

Hsinchu 300, Taiwan

Phone: +886-3-5770-270

Fax: +886-3-5770-267

Internet: support@accton.com.tw

Europe Headquarters

Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despí,

Barcelona, Spain.

Phone: +34-93-477-4920

Fax: +34-93-477-3774

Asia Pacific Headquarters

1 Claymore Drive

#08-05/06 Orchard Towers (Rear Block)

Singapore 229594

Phone: +65 238 6556

Fax: +65 238 6466

Internet: www.acctontech.com

No part of this document may be copied or reproduced in any form or by any means without the prior written

consent of Accton Technology Corporation.

Accton makes no warranties with respect to this documentation and disclaims any implied warranties of

merchantability, quality, or fitness for any particular purpose. The information in this document is subject to

change without notice. Accton reserves the right to make revisions to this publication without obligation to

notify any person or entity of any such changes.

EC3002

E012003-R01

150000019400B

Accton Technology Corporation

Limited Warranty: Accton warrants all its products to be free of manufacturing defects in

workmanship and materials, under normal use and service, for the applicable warranty

term. All Accton products carry a standard 90-day limited warranty from the date of

purchase from Accton or its Authorized Reseller. Accton may, at its own discretion, repair

or replace any product not operating as warranted with a similar or functionally equivalent

product, during the applicable warranty term.

The standard limited warranty can be upgraded to a Limited Lifetime* warranty by

registering new products within 30 days of purchase from Accton or its Authorized

Reseller. Registration can be accomplished via the enclosed product registration card or

online via the Accton web site. Failure to register will not affect the standard limited

warranty. The Limited Lifetime warranty covers a product during the Life of that Product,

which is defined as the period of time during which the product is an “Active” Accton

product. A product is considered to be “Active” while it is listed on the current Accton price

list. As new technologies emerge, older technologies become obsolete and Accton will, at

its discretion, replace an older product in its product line with one that incorporates these

newer technologies. At that point, the obsolete product is discontinued and is no longer

an “Active” Accton product. A list of discontinued products is attached with the most

recent version being available on the support section of our web site

(http://www.acctontech.com

All products that are replaced become the property of Accton. Replacement products may

be either new or reconditioned. Any replaced or repaired product carries either a 30-day

limited warranty or the remainder of the initial warranty, whichever is longer. Accton is not

responsible for any custom software or firmware, configuration information, or memory

data of Customer contained in, stored on, or integrated with any products returned to

Accton pursuant to any warranty. Products returned to Accton should have any

customer-installed accessory or add-on components, such as expansion modules,

removed prior to returning the product for replacement. Accton is not responsible for

these items if they are returned with the product.

Customers must contact Accton for a Return Material Authorization number prior to

returning any product to Accton. Proof of purchase may be required. Any product

returned to Accton without a valid Return Material Authorization (RMA) number clearly

marked on the outside of the package will be returned to customer at customer’s

expense. Customers are responsible for all shipping charges from their facility to Accton.

Accton is responsible for return shipping charges from Accton to customer.

Limited Warranty

WARRANTIES EXCLUSIVE: IF AN ACCTON PRODUCT DOES NOT OPERATE AS

WARRANTED ABOVE, CUSTOMER'S SOLE REMEDY SHALL BE REPAIR OR

REPLACEMENT OF THE PRODUCT IN QUESTION, AT ACCTON’S OPTION. THE

FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF

ALL OTHER. WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN

FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING

WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. ACCTON NEITHER ASSUMES NOR AUTHORIZES ANY

OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION

WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.

ACCTON SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND

EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT

EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE,

NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS

TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED

USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR

TORT (INCLUDING NEGLIGENCE), SHALL ACCTON BE LIABLE FOR INCIDENTAL,

CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR

FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS

ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,

MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS

PRODUCTS, EVEN IF ACCTON OR ITS AUTHORIZED RESELLER HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

SOME COUNTRIES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES

OR THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY

NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,

WHICH MAY VARY FROM STATE TO STATE. NOTHING IN THIS WARRANTY SHALL

BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.

* Accton will provide warranty service for up to three years following discontinuance from

the active Accton price list. Under the limited lifetime warranty, internal and external

power supplies, fans, and cables are covered by a standard one-year warranty from date

of purchase.

Contents

Introduction 1

Key Features 2

Description of Hardware 3

Fiber Cable Connection 3

UTP Port 3

External DIP Switch Settings 4

Internal DIP Switch Settings 5

LED Indicators 6

Installing the FTTH CPE 7

Package Contents 7

System Requirements 7

Mounting the CPE 8

Desktop Mounting 9

Connecting to the CPE 9

Making a Connection to the UTP Port 10

Powering On the CPE 10

Configuring the TCP/IP Protocol 11

Windows 95/98/NT 11

Windows 2000 11

Windows XP 11

Mac OS Systems 12

Product Specifications 13

Troubleshooting 14

Diagnosing CPE Indicators 14

If You Cannot Connect to the Internet 14

Port and Cable Assignments 15

RJ-45 Ethernet Port 15

Straight-Through Wiring 15

Crossover Wiring 16

EMI Certification 17

VCCI Class B Compliance (Japan) 17

CE Mark Declaration of Conformance 17

Contents

Introduction

Fiber-To-The-Home (FTTH) has always been an attractive option for Internet

access. It has all the benefits of optical fiber. It provides a future-proof network, in

that you do not have to go through the hassles of upgrading from ADSL to XDSL, or

digital co-ax to digital wireless. It does not have to struggle with electromagnetic

interference problems, and with no active “outside-plant” components, it offers the

highest reliability. Moreover, it does not require electric power and is immune to

lightning and other transients. These properties of fiber lead to the lowest possible

power and operational costs, such as maintenance, provisioning and facilities

planning.

The EC3002 Media Converter is an ideal Customer Premises Equipment (CPE) for

an FTTH system. The CPE is a single-channel fiber-to-copper media converter

housed in a compact unit. It allows a service provider to extend an Ethernet

connection over optical fiber directly to a subscriber. The CPE has an embedded (no

external plug/socket) 100BASE-FX full-duplex single-fiber single-mode cable

connection that runs from the service provider’s central office (CO). The

single-mode fiber connection can be run up to distances of 15 km from the CO. The

CPE also provides one standard 10/100BASE-TX RJ-45 Ethernet port for

connecting to a customer’s PC, switch, or other network device using twisted-pair

cable.

EC3002 CPE

100BASE-FX full-duplex

single-fiber (WDM) link to CO

(up to 15 km)

Subscriber’s Home

Central Office

(CO)

10/100BASE-TX UTP

connection to computer

(up to 100 m)

Introduction

Key Features

• High-speed Internet access

• Optical fiber port supports transmission distances up to 15 km

• Built-in transparent bridging between different media segments

• Supports 1K MAC addresses — forwards packets only if necessary

• Always-on fast optical fiber connection eliminates dial-up delays, providing

transparent Internet access

• Auto-negotiating 10/100BASE-TX Ethernet port

• Provides DIP switch setting to force 10/100BASE-TX port speed, duplex mode,

and MDI/MDI-X wiring

• Internal DIP switch setting for Auto MDI-X, flow control and port speed

• Compliant to IEEE 10BASE-T, 100BASE-TX, and 100BASE-FX standards

• Provides back pressure for half-duplex and IEEE 802.3x flow control for full-duplex

• Internal mechanism prevents the fiber connection from being disconnected

accidently

• Natural air cooling system without using a fan

• LEDs indicate Ethernet activity and fiber link status

• Provides device status information for management from the CO

• Simple plug-and-play installation

• Space-saving compact size

Inhaltsverzeichnis

Andere Accton Technology Medienkonverter Handbücher

Accton Technology

Accton Technology Edge-corE EC3802-WDM Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung