Accucold CP171MED Bedienungsanleitung

MODELS / MODÈLES :

CP171MED –AccuCold

Two-door refrigerator-freezer with two compressors

Réfrigérateur-congélateur avec deux portes et deux compresseurs

VT44 –EQTemp / SCF401SS MED Series –AccuCold

Chest freezers / Congélateurs horizontaux

EQFF/ EQFR Series –EQTemp

Frost-free chest freezers and refrigerators

Congélateurs et réfrigérateurs horizontaux sans givre

SCUF18/20 / SCUR18/20 Series –Summit Commercial

Full-size frost-free all-freezers and all-refrigerators

Congélateurs et réfrigérateurs grand format sans givre

VT/ VLT Series –AccuCold

Low temperature freezers / Congélateurs à basse température

MEDICAL, LABORATORY AND SCIENTIFIC REFRIGERATORS AND FREEZERS

RÉFRIGÉRATEURS ET CONGÉLATEURS POUR USAGES MEDICAUX,

SCIENTIFIQUES ET EN LABORATOIRE

If you need service or call with a question, please have this

information ready.

Si vous avez besoin de service ou si vous appelez avec une

question, s'il vous plaît disposer de ces informations prêtes.

Model / Modéle: Serial no.:_________________

Options added /

Options qui ont été ajoutées:______________________________

Date of purchase / Date d'achat: __________________________

Dealer / Revendeur : ____________________________________

For parts: visit our website / Pour les pièces: visitez notre site Web:

www.summitappliance.com/support

USE & CARE GUIDE / MODE D’EMPLOI

Felix Storch, Inc.

ISO 9001:2015 Registered

770 Garrison Avenue

Bronx, New York 10474

www.accucold.com

APPLIANCE SAFETY

Your safety and the safety of others are very important to us.

We have provided many important safety messages in this manual and

on your appliance. Always read and obey all safety messages.

You can be seriously injured or even killed if you don’t follow instructions.

Safety messages will tell you what the potential hazard is, how to reduce

the chance of injury, and what can happen if the instructions are not

followed.

Plug into a grounded 3-prong outlet.

Do not remove ground prong, nor use a 3/2 adapter.

Do not use an extension cord.

Use care not to plug into outlets controlled by wall switches.

Disconnect power before servicing.

After servicing, replace all parts and panels before operating.

Use nonflammable cleaners.

Keep flammable materials and vapors, such as gasoline, away from

appliances.

Use two or more people to move and install appliance.

Drawer refrigerators are provided with anti-tip brackets. Always install

prior to use.

Proper Disposal of Your Old Appliance e

Old appliances can represent a suffocation hazard to children.

Remove doors from your old appliance.

Leave shelves in place.

If an old appliance contains refrigerants, it must be recycled by a licensed

service or disposal company.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury

when using your appliance, follow these basic precautions:

Felix Storch, Inc.

Page 2

Page 2Page 2

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard !

Use two or more people to move and install your appliance.

Failure to do so can result in back or other injury.

CAUTION: YOU MUST ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS

BEFORE TURNING ON, TO ALLOW THE COMPRESSOR LUBRICANT TO

DRAIN. FAILURE TO DO SO MAY ADVERSELY AFFECT PERFORMANCE

AND THE LIFETIME OF THE UNIT.

1. Remove packaging materials.

2. Remove tape and glue residue from surfaces before turning on the

appliance. Rub a small amount of liquid dish soap over the adhesive

with your fingers. Rinse with warm water and dry.

3. Do not use sharp instruments, rubbing alcohol, flammable fluids, or

abrasive cleaners to remove tape or glue. These products can

damage the surface of your appliance.

4. When Moving Your Appliance:

Your appliance is heavy. When moving the appliance for cleaning or

service, be sure to protect the floor. Always pull the appliance straight

out when moving it. Do not wiggle or “walk” the appliance when trying

to move it, because floor damage can occur.

5. Clean Before Using:

After you remove all of the packaging materials, clean the inside of

your appliance before using it. See cleaning instructions in Appliance

Care.

6. Some upright models have leveling legs. Level as necessary for best

operation.

7. If your appliance has casters, after moving into place, lock the brakes

on those casters supplied with brakes. Always unlock before moving

the appliance for cleaning.

Key Eject Lock (some models)

To lock or unlock the appliance, you must hold the key in the lock while

turning. The lock is spring loaded, so the key cannot be left in the lock.

If the key is lost, contact your dealer or SUMMIT APPLIANCE for a

replacement. Always give the model and serial number of your appliance

when requesting a replacement key. Keys for most models can be

ordered online at www.summitappliance.com/support

Page 3

Felix Storch, Inc.

LOCATION REQUIREMENTS

Keep flammable materials and vapors, such as gasoline,

away from appliances. Failure to do so can result in fire,

explosion or death.

IMPORTANT: Do not install the appliance near an oven, radiator, or

other heat source, nor in a location where the temperature will fall below

40°F (5°C). Do not place in direct sunlight.

Check the strength of the floor before installing your appliance. It should

hold the weight of a fully loaded appliance. Allow at least 1” (2.5 cm) of

airspace at the top and on both sides of the appliance and 1” (2.5 cm)

between the back of the appliance and the wall. If the appliance is going

to be placed against a wall, leave extra space on the hinge side so the

door can open wider than its width.

Note: This appliance may be installed side by side with another

appliance or appliances. Allow for a 3” (7.5 cm) clearance at the top

and sides and a ¼” (0.64 cm) clearance between the appliances. IF

YOUR MODEL HAS THE LETTERS “BI” IN THE SUFFIX, IT IS

DESIGNED FOR BUILT-IN USE, AND DOES NOT REQUIRE

CLEARANCE EXCEPT IN THE BACK.

Electrical Shock Hazard !

Plug into a grounded 3-prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in fire, electrical

shock or death.

Recommended grounding method

A 115 Volt (AC only) 60 Hz grounded electrical supply with a 15- or 20-

amp fuse or circuit breaker is required. It is recommended that a separate

circuit serving only your appliance be provided. Use outlets that cannot

be turned off by a switch or pull chain. Do not use an extension cord.

Felix Storch, Inc.

Page 4

1. Locate the two front leveling legs that may be taped among the packing

materials. In many models these legs are already mounted into the

underside of the appliance.

2. Screw these legs into the front holes on the bottom of the appliance. The

back of the appliance rests on two fixed supports. (Built-in models also

have rear level legs that can provide more precise leveling).

3. Adjust the front legs just enough to lift the cabinet up off the floor.

Note: If your model is equipped with front rollers, the front legs should be

lowered enough to lift the rollers off of the floor to ensure the appliance

does not roll forward when the door is opened.

4. Place a leveling tool on top of the appliance, first side to side, then front to

back. Turn leg counterclockwise to raise a corner. Turn leg clockwise to

lower a corner.

5. Repeat Step 4 until appliance is level.

6. After appliance is fully loaded, recheck with level as in Step 4.

7. If your appliance is equipped with casters, the two front casters have

brakes to prevent rolling. Keep brakes locked, and unlock for moving only.

Level your appliance (some upright models)

APPLIANCE USE

In order to ensure proper temperature, you need to permit proper airflow in

the appliance. Do not block off any air vents. If the vents are blocked, airflow

will be prevented, and temperature and moisture problems may occur. Always

position contents to allow some airflow between shelves or baskets.

Allow the appliance to cool at least 6 to 8 hours before adding contents. Allow

24 hours for temperature to stabilize.

Note: When the appliance is first started, the compressor will run constantly

until the appliance is cooled. It may take 6 to 8 hours (or longer),

depending on room temperature and the number of times the appliance

door is opened. After the appliance is cooled, the compressor will turn on

and off as needed to keep the appliance at the proper temperature.

For optimum temperature performance, it is recommended that this unit

be at least 30% full during use. If you are only using this unit to store

small loads, we recommend adding some water bottles or freezer packs

to ensure temperature stability.

The outside of your appliance may feel warm. This is normal. The appliance’s

design and main function is to remove heat from packages and air space

inside the appliance. The heat is transferred to the room air, making the

outside of the appliance feel warm. (In some models the condenser that gets

warm is just inside the side walls, making these walls warm to the touch.)

ENERGY-SAVING TIPS

The more airflow provided around an appliance, the less energy it will use.

If your appliance requires manual defrosting, keep ice build-up to less than 1/2".

Keep doors open a minimum of time, and shut securely.

Felix Storch, Inc.

Page 5

REVERSING THE DOOR SWING (some models)

If you find the direction of opening the door on your appliance inconvenient, you

can change it. Holes on the opposite side have already been prepared in the

factory.

For two-door units:

Take off the upper hinge cover from the top door and

remove the screws that hold the top hinge.

Lift the hinge straight up to free the hinge pin from the

socket in the top of the door.

Lift the top door to free its bottom socket from the hinge

pin on the central hinge bracket.

Remove the screws to the central hinge to free its pin

from the top of the lower door.

Lift the door up and away from the bottom hinge

pin.

Remove the screws to the bottom hinge.

Remove the decorative caps from the opposite

side and install the bottom hinge. Plug the holes

from the original side with the decorative caps.

Replace door onto the pin on the bottom hinge,

then install the central hinge into lower door.

Insert screws into the central hinge and plug the

holes on the reverse side.

Replace the upper door onto the central hinge pin.

Insert screws into the top hinge and tighten.

For one-door units:

Take off the upper hinge cover from the door and

remove the screws that hold the top hinge.

Lift the hinge straight up to free the hinge pin from

the socket in the top of the door.

Lift the door up and away to free its bottom

socket from the hinge pin.

Remove the screws to the bottom hinge.

Remove the decorative caps from the opposite side and plug the holes from the

original side with the decorative caps.

Move the bottom hinge to the opposite side and

tighten the screws. Install any lock washers or nuts

if they were used in the original installation.

Replace door onto the hinge pin on the bottom

hinge. Place top hinge pin into door. Insert screws

into the top hinge and tighten.

Felix Storch, Inc.

Page 6

APPLIANCE CARE

Cleaning a frost-free appliance (including models beginning

with EQFF, EQFR, SCUF, and SCUR)

Use nonflammable cleaners.

Frost-free means that you do not have to defrost your appliance. Frost is

removed by air moving and collecting any moisture and depositing it on the

cooling coil. The cooling coil periodically warms up enough to melt the frost,

and the water then flows down to the drain pan (located behind the base grill)

where it is evaporated.

Complete cleaning should be done at least once a year.

1. Unplug appliance or disconnect power.

2. Remove all contents.

3. Wash the inside walls with a solution of mild detergent in warm water or

2 tbs (26 g) baking soda to 1 qt (0.95 L) warm water.

Do not use abrasive or harsh cleaners such as window sprays,

scouring cleansers, flammable fluids, cleaning waxes, concentrated

detergents, bleaches or cleansers containing petroleum products on

plastic parts, interior and door liners or gaskets. Do not use paper

towels, scouring pads, or other harsh cleaning tools. These can

scratch or damage surfaces.

4. Rinse well and wipe dry with a clean soft cloth.

5. Use the appropriate cleaning method for the exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft cloth and a

mild detergent in warm water. Do not use abrasive or harsh cleaners,

or cleaners designed for stainless steel. Dry thoroughly with a soft

cloth. For additional protection against damage to painted metal

exteriors, apply appliance wax (or auto paste wax) with a clean, soft

cloth. Do not wax plastic parts.

6. Plug in appliance or reconnect power.

7. Replace all containers.

Cleaning a cycle defrost or manual defrost appliance

Cycle defrost models utilize a system where ice builds up on the rear wall and

melts when the compressor is off. Manual defrost models continually build ice

on inner walls.

NEVER USE A METAL OBJECT TO REMOVE ICE FROM THE REAR WALL.

IF NEEDED, USE A PLASTIC ICE-SCRAPER OR A HAIR DRYER.

Clean surfaces using the same instructions as for frost-free models.

For CSS Models (completely stainless steel), only use cleaners

especially made for stainless steel.

Felix Storch, Inc.

Page 7

Base Grill (some models only)

To Remove and Replace the Base Grill:

1. Open the appliance door and remove the base grill by pulling down

and out from the top.

2. Replace the base grill by putting the clips in the openings in the

appliance panel. Push in until the base grill snaps into place.

Changing the Light Bulb (some models only)

NOTE: Not all appliance bulbs will fit your appliance. Be sure to replace

the bulb with one of the same size, shape, base size and wattage.

You can purchase bulbs from www.summitappliance.com/support

1. Unplug appliance or disconnect power.

2. Remove the light shield. Most models do not require tools.

3. Replace the light bulb with an appliance bulb of the same wattage.

4. Replace the light shield.

5. Plug in appliance or reconnect power.

Loss of Power

After the power is restored, unplug the appliance for 30 minutes to allow

the refrigeration system to equalize. During this time, keep the door

closed as much as possible.

Remember: A full appliance stays cold longer than a partially filled one.

Moving Care

1. Remove all containers.

2. Unplug the appliance.

3. Clean it thoroughly.

4. Tape the appliance shut and tape the electrical cord to the cabinet.

When you get to the new location, refer to the Installation Instructions and

Temperature Selection sections for information on installation and setting

the controls.

APPLIANCE CARE (cont’d)

Felix Storch, Inc.

Page 8

YOUR APPLIANCE MAY HAVE A MECHANICAL (DIAL) OR

DIGITAL THERMOSTAT. DIAL INSTRUCTIONS ARE BELOW.

DIGITAL INSTRUCTIONS ARE ON PAGE 10.

HOW TO ADJUST THE THERMOSTAT

Your appliance may be controlled with a thermostat knob located

inside the unit, towards the right-hand corner. Turn the knob

clockwise from the STOP (0) position toward the higher numbers

for colder temperatures.

Temperature Controls

Higher settings on the knob (higher numbers) mean lower

temperatures (colder) in all compartments of the appliance. The

temperature inside a refrigerator may even drop below 32°F. Use

higher thermostat settings only when required or recommended.

When the ambient temperature is normal, we recommend a medium

setting.

Changes of the ambient temperature affect temperature in the interior

of the appliance, so keep this in mind when choosing the setting of the

thermostat knob.

In STOP (0) position, the appliance does not operate (the cooling

system is switched off), yet the power supply is not interrupted (the

light is on when you open the refrigerator door).

The temperatures in the refrigerator and in the freezer compartment

also depend on how often you open the door.

In all small refrigerators and freezers without interior fans, tempera-

tures are coldest near the bottom, and occasionally near the rear.

Place contents accordingly.

For optimum temperature performance, it is recommended that this

unit be at least 30% full during use. If you are only using this unit to

store small loads, we recommend adding some water bottles or

freezer packs to ensure temperature stability.

TEMPERATURE SELECTION

Felix Storch, Inc.

Page 9

Some units are equipped with a Traceable

Thermometer/ Alarm that simultaneously displays

minimum, maximum and current interior temperatures

and provides a visual and audible signal when the

temperature inside the unit falls outside the set

temperature range.

The temperature sensor, or probe, is enclosed in a

glycol-filled bottle that you insert into the location to be monitored, such as

inside a refrigerator or freezer, once the unit has been programmed. The

thermometer/alarm itself can be attached to the door of the unit with the

magnet on the back, or it can be placed on a convenient table or shelf.

Power to the Traceable Thermometer/Alarm is supplied with a lithium iron

disulfide battery with a 10-year shelf life. When it is inserted correctly, the

unit will beep and all segments of the LCD display will be temporarily

activated. (Note that alarm temperatures will have to be reset after replacing

the battery.)

The temperature display can be switched between Celsius (°C) and

Fahrenheit (°F) by sliding the °C/°F button located on the back of the unit.

If you find that it is necessary to change the temperature setting for your

digital-thermostat controlled appliance,

please refer to the following instructions.

The front panel of the thermostat is

illustrated here:

To see the SET POINT:

Push and immediately release the set key. The LED will flash and show the

set point value. Wait 15 seconds and the inside temperature will display

again. Typically, refrigerator models are set at 4°C and freezers at -18°C.

To change the SET POINT:

Push set and within 15 seconds, press ▲ or ▼ until the desired set point is

shown. The new setting will be memorized after 15 seconds provided no other

keys are pushed, or you can press the set key immediately.

Notes: 1. The minimum and maximum limits of the temperature range of your

thermostat are preset and locked by us. For refrigerator models, that

range is 33°F to 40°F. For most freezers, the range is -25°C to -1°C. To

reset these ranges, either call us or find information on our website

under Troubleshooting.

2. If the appliance is unplugged, has lost power or is turned off, you must

wait 3 to 5 minutes before restarting the unit. If you attempt to restart

before this time delay, the appliance will not start.

DIGITAL THERMOSTAT INSTRUCTIONS

TRACEABLE THERMOMETER / ALARM

Felix Storch, Inc.

Page 10

°C

°F

set

▼

▲

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Accucold Kühlschrank Handbücher

Accucold

Accucold SPRF56 Bedienungsanleitung

Accucold

Accucold FFAR24L Bedienungsanleitung

Accucold

Accucold FF28LWHVAC Bedienungsanleitung

Accucold

Accucold SPRF11 Bedienungsanleitung

Accucold

Accucold MOMCUBE MC2 Bedienungsanleitung

Accucold

Accucold ADA401REF Bedienungsanleitung

Accucold

Accucold FFAR23L Bedienungsanleitung

Accucold

Accucold FFUR19 Bedienungsanleitung

Accucold

Accucold FF6 Bedienungsanleitung

Accucold

Accucold ACR45L Bedienungsanleitung

Accucold

Accucold BREF44 Bedienungsanleitung

Accucold

Accucold Summit ACR1106 Series Bedienungsanleitung

Accucold

Accucold ADA404REF Bedienungsanleitung

Accucold

Accucold Summit FF6W Series Bedienungsanleitung

Accucold

Accucold CM411L Bedienungsanleitung

Accucold

Accucold FF7LBIVAC Bedienungsanleitung

Accucold

Accucold ACR1515SS Bedienungsanleitung

Accucold

Accucold EQFR Series Bedienungsanleitung

Accucold

Accucold ACR82L Bedienungsanleitung

Accucold

Accucold ACR612 Bedienungsanleitung

Accucold

Accucold SPFZ25 Bedienungsanleitung

Accucold

Accucold SPRF26 Bedienungsanleitung

Accucold

Accucold ACR1718 Series Bedienungsanleitung

Accucold

Accucold FF511L Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung