Accucold SPRF56 Bedienungsanleitung

Write Model and Serial Numbers here:

Model _________________________

Serial No. ______________________

PORTABLE REFRIGERATOR/FREEZER

Models:

SPRF56 and SPRF86

User Manual

BEFORE USE, PLEASE READ AND FOLLOW

ALL SAFETY RULES AND OPERATING INSTRUCTIONS

FELIX STORCH, INC.

ISO 9001:2015 registered

770 Garrison Avenue

Bronx, NY10474

TABLE OF CONTENTS

Appliance Safety 3

Technical Information 3

Location of Parts 4

Before your First Use 5

Installation 5

Electrical Connection 5

Setting the Temperature 6-7

Celsius Temperature Readout 7

Energy-Saving Tips 7

Cleaning 7

Storage 7

Troubleshooting 8

Limited Warranty 10

APPLIANCE SAFETY

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual. Always read and obey all safety

messages. Serious injury or even death can result from not following these instructions. All safety

messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and

tell you what can happen if the instructions are not followed.

• Keep the cooler upright while it is turned on and in use.

• Never switch the cooler on with wet hands or when your feet are in contact with water.

• If connected to a DC power source (for example, a data port socket) in a vehicle, do not

attempt to turn the cooler on when your vehicle engine is not turned on.

• Always be sure the correct voltage and current are applied to the cooler. The voltage and

current are clearly marked on the manufacturer's label, which can be found on the side of

the cooler.

• Be sure the power source can safely supply the required current when you use the AC/DC

adapter.

• Do not carry corrosives or solvent material in the cooler.

• Never obstruct vents as they supply necessary airflow to motors and fans.

• Do not fill cooler with liquid or ice.

TECHNICAL INFORMATION

Model Number

SPRF56

SPRF86

Capacity

55 liters (1.94 ft3)

80 liters (2.8 ft3)

Rated Voltage

12V/24V DC

Total Input Power

50W

55W

Refrigerant

R134a

Product Dimensions (in.)

27.1W x 19.3D x 21H

27.1W x 19.3D x 22.4H

Pack Dimensions (in.)

29.3W x 21.5D x 24.8H

29.3Wx 21.5D x 26.3H

Net Weight (lb.)

55.1-61.7

59.5-66.1

NOTE: Specifications are subject to change without notice.

LOCATION OF PARTS

BEFORE YOUR FIRST USE

Check to ensure all of the following items have been included in the carton box along with this

manual:

1 Portable Refrigerator/Freezer, model number SPRF56 or SPRF86

1 12V Power Cord

1 110V AC/DC Power Adapter

Cleaning Before First Use

After you remove the cooler from its packaging, clean the inside before using. See the cleaning

instruction in the Cleaning section of this manual.

INSTALLATION

1. Place the cooler on a dry surface where it will be protected from water or moisture.

2. The cooler should not be used where it may be exposed to rain.

3. The cooler should be installed in a position that allows for adequate ventilation.

4. Never locate the unit anywhere the ambient temperature is below 0°C (32°F) or above 32°C

(90°F).

Electrical Connection

This cooler can be operated from either a DC or an AC power source. Both require the use of the

12V power cord supplied with the unit. With an AC source, the included AC/DC adapter must be

plugged into the end of the 12V power cord, then connected to the AC power source, such as a wall

socket.

DC Source

The cooler can be operated between 10.3V and 17.5V DC or 22V and 31V DC. Check that the

battery voltage falls within these ranges before connecting the unit. If the voltage is out of range, the

unit will not operate. Excessive voltage could damage the electrical components of the cooler.

AC Source

Be sure to use the AC/DC adapter when your power source is AC, otherwise the cooler could be

damaged.

SETTING THE TEMPERATURE

The cooler can be operated with 12V/ 24V DC power. Prior to connection, check whether the

voltage indicated on the manufacturer’s label is in accordance with the battery voltage.

Connect your cooler to the data port socket of your vehicle with the 12V/ 24V DC cord.

1. Plug the 12V power cord into the cord socket on the side of the unit (see diagrams on page 4).

2. If using a DC power source, such as the data port of a vehicle, plug the other end of the cord into

the power source.

3. If using an AC power source, connect the AC/DC adapter to the of the power cord, then plug the

adapter into a wall socket or other AC power source.

4. Press the power switch to turn on the cooler. You will hear the sound of the compressor starting.

5. Press the UP button or the DOWN button to adjust the temperature. Pressing either button with

adjust the temperature by 1°C.

6. The temperature of the units can be set from -19°C (-2.2°F) to 10°C (50°F).

• The cooler is an advanced fridge, combining the latest compressor and computerized digital

control system technology. The high efficiency of the compressor will freeze to -18°C (-0.4°F) in

an ambient temperature of 30°C (86°F). (The computerized digital control system display a direct

readout of the actual inbox temperature).

NOTE: The compressor will shut off if the internal temperature of the unit is 1°C or more below the

set temperature. When the inbox temperature is higher than the set-temperature by 2°C, the

compressor will turn on again, after an interval of about two minutes.

Celsius Temperature Readout

You’ll notice that the temperature readout on the LED display of your cooler is in Celsius degrees

rather than Fahrenheit. You can use the graph below to quickly convert one temperature scale into

the other. For example, to change 32°F into °C find 32 on the horizontal Fahrenheit scale, trace up

to the inclined line, then move left to the vertical axis. That reading, 0, is the Celsius equivalent of

32°F. Reverse the procedure to change Celsius to Fahrenheit.

ENERGY-SAVING TIPS

• Place the cooler in a cool, dry place away from direct sunlight.

• Always cool items before storing them in the cooler.

• Do not set the temperature colder than you require.

• Do not open the cooler more than necessary.

• Do not leave the lid open longer than necessary.

STORAGE

When storing your cooler, we recommend that you leave the lid open slightly. This will help keep

mold from forming and prevent stale odors. It is a good idea to follow the cleaning procedure (below)

before storing your cooler.

CLEANING

• Clean your unit with a soft cloth moistened with lukewarm water.

• Avoid getting water droplets in the vents, as this may lead to damage to the electronic

components.

• Use a soft, dry cloth to completely dry the cooler completely after cleaning.

• Clean the unit after use and before storage.

NOTE: Never use solvents or abrasive cleaners, as this will damage the cooler. Do not use

scouring agents or scrapers when cleaning your cooler.

TROUBLESHOOTING

Before calling for assistance or service, please check this Troubleshooting section. It may save you

the cost of a service call. If you still need help, follow the instructions below.

Problem

Cause

Solution

The unit is not

cooling.

Loose contact between the

plug and the unit socket.

Connect the plug firmly into the unit socket and

data port.

The power voltage is out of

range.

Check if the unit is plugged into power

supply of 12V or 24V.

The temperature sensor is

malfunctioning.

Contact a local repair center to replace the

temperature sensor.

The cooling

efficiency is bad.

The fan motor does not

work.

Contact a local repair center to replace the fan

motor.

The unit is exposed to

direct sunlight.

Place the unit in a shady, cool place with good

airflow.

The ventilator or propeller

is blocked.

Clean the ventilator and the propeller, and

make sure the unit has good ventilation.

There is a strange

noise or vibration

during operation.

The unit is malfunctioning.

To prevent breakdown, turn the unit off

immediately and unplug it from the data

port. Contact a local repair center.

There is a burning

smell or the case

is deformed.

The unit is malfunctioning.

To prevent breakdown, turn the unit off

immediately and unplug it from the data

port. Contact a local repair center.

LED displays “E1”

and the unit is not

running.

Not enough power is being

supplied to the unit.

Check unit whether it’s plugged into the power

supply of 12V or 24V, ensure that battery

charge is not too low.

LED displays “E2”

and the unit is not

running.

The voltage being supplied

to the unit is too high.

Check unit whether it’s plugged into the power

supply of 12V or 24V, ensure that input voltage

is not too high.

LED displays “E3”

and the unit is not

running.

The temperature senor is

disconnected or faulty.

Check temperature sensor’s plug, or replace

the sensor.

If your appliance shows other symptoms than those described above, or if you have checked all

items listed as the cause and the problem still exists, then call Accucold® Customer Service at

1-888-4-MEDLAB.

NOTES

LIMITED WARRANTY

ONE YEAR LIMITED WARRANTY

Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is

operated and maintained according to instructions attached to or furnished with the product, warrantor will

pay for factory specified parts and repair labor to correct defects in materials or workmanship. Service must

be provided by a designated service company. Outside the 48 states, all parts are warranted for one year

from manufacturing dates. Plastic parts, shelves, and cabinets are warranted to be manufactured to

commercially acceptable standards and are not covered from damage during handling or breakage.

5 YEAR COMPRESSOR WARRANTY

1. The compressor is covered for five years.

2. Replacement does not include labor.

ITEMS WARRANTOR WILL NOT PAY FOR:

1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to

replace or repair fuses or correct wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as

filters) are excluded from warranty coverage.

3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation,

installation not in accordance with electrical or plumbing codes, or use of products not approved by

warrantor.

4. Replacement parts or repair labor costs for units operated outside the United States.

5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

6. Expenses for travel and transportation for product service in remote locations.

7. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not

installed in accordance with published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMERS SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE

PRODUCT REPAIR AS PROVIDED HEREIN, IMPLIE WARRANTIES, INCLUDING WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR.

WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME

STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTIAL OR CONSEQUENTIAL

DAMAGES, OR LIMITATIONS TO THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY

GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY

FROM STATE TO STATE.

FELIX STORCH, INC.

ISO 9001:2015 registered

770 Garrison Avenue

Bronx, NY10474

www.accucold.com

For parts and accessory ordering,

troubleshooting, and helpful hints, visit:

www.accucold.com/support

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Accucold Kühlschrank Handbücher

Accucold

Accucold SPRF11 Bedienungsanleitung

Accucold

Accucold ACR82L Bedienungsanleitung

Accucold

Accucold SPFZ25 Bedienungsanleitung

Accucold

Accucold ACR1515SS Bedienungsanleitung

Accucold

Accucold FFAR23L Bedienungsanleitung

Accucold

Accucold FFAR24L Bedienungsanleitung

Accucold

Accucold ACR612 Bedienungsanleitung

Accucold

Accucold CM411L Bedienungsanleitung

Accucold

Accucold SPRF26 Bedienungsanleitung

Accucold

Accucold Summit FF6W Series Bedienungsanleitung

Accucold

Accucold ADA401REF Bedienungsanleitung

Accucold

Accucold ACR1718 Series Bedienungsanleitung

Accucold

Accucold SPRF26 Bedienungsanleitung

Accucold

Accucold CT66 Series Bedienungsanleitung

Accucold

Accucold ACR1717 series Bedienungsanleitung

Accucold

Accucold CP171MED Bedienungsanleitung

Accucold

Accucold FF28LWHVAC Bedienungsanleitung

Accucold

Accucold ACR45L Bedienungsanleitung

Accucold

Accucold ADA404REF Bedienungsanleitung

Accucold

Accucold Summit ACR1106 Series Bedienungsanleitung

Accucold

Accucold EQFR Series Bedienungsanleitung

Accucold

Accucold MOMCUBE MC2 Bedienungsanleitung

Accucold

Accucold BREF44 Bedienungsanleitung

Accucold

Accucold FF511L Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung