AccuLine 40-6640 Bedienungsanleitung
©2007 Johnson Level & Tool
1
Rev 1
Self-Leveling Cross-Line Laser Level
with GreenBrite®Technology
Model No. 40-6640
Instruction Manual
Congratulations on your choice of this Self-Leveling Cross-Line Laser
Level. We suggest you read this instruction manual thoroughly before
using the instrument. Save this instruction manual for future use.
This is a Class IIIa laser tool and is manufactured to comply with CFR
21, parts 1040 .10 and 1040 .11 as well as international safety rule IEC
285.
2
©2007 Johnson Level & Tool
Table of Contents
1. Kit Contents
2. Features and Functions
3. Safety Instructions
4. Location/Content
of Warning Labels
5. Location of Parts/Components
6. Operating Instructions
7. Using the Product
8. Self-Check and Calibration
9. Technical Specifications
10. Application Demonstrations
11. Care and Handling
12. Product Warranty
13. Product Registration
14. Accessories
1. Kit Contents
Description Qty.
Self-leveling Cross Line Laser Level 1
Multi-Functional Mount 1
Ni-MH Rechargeable Battery Pack 1
6V Battery Adapter 1
Mounting Strap 1
Magnetic Target 1
Tinted Glasses 1
Instruction Manual with Warranty Card 1
Hard Shell Carrying Case 1
2. Features and Functions
• Green Beam is 400% brighter than red beam laser level.
• Able to project one cross-line beam, consisting of one horizontal line
and one vertical line.
• Magnetic dampening compensation system.
• Laser flashes/sounds audible alarm when beyond leveling tolerance.
• Manual mode feature allows unit to be moved to extreme angles
without the audible alarm and laser flash being triggered
• Multi-functional magnetic mount is included to allow
hanging on wall, attach to metal, or connect to tripod
(5/8"-11 or 1/4"-20).
• Includes adjustable strap for attachment to pipe or conduit.
3. Safety Instructions
Please read and understand all of the following instructions, prior
to using this tool. Failure to do so, may result in bodily injury.
©2007 Johnson Level & Tool
3
ATTENTION IMPORTANT
• Read all instructions prior to operating this laser tool. Do not remove any labels from
tool.
• Do not stare directly at the laser beam.
• Do not project the laser beam directly into the eyes of others.
• Do not set up laser tool at eye level or operate the tool near a reflective surface as
the laser beam could be projected into your eyes or into the eyes of others.
• Do not place the laser tool in a manner that may cause someone to unintentionally
look into the laser beam. Serious eye injury may result.
• Do not operate the tool in explosive environments, i.e. in the presence of gases or
flammable liquids.
• Keep the laser tool out of the reach of children and other untrained persons.
• Do not attempt to view the laser beam through optical tools such as telescopes as
serious eye injury may result.
• Always turn the laser tool off when not in use or left unattended for a period of time.
• Remove the batteries when storing the tool for an extended time (more than 3 months)
to avoid damage to the tool should the batteries deteriorate.
• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt
to repair this tool, warranty will be void.
• Use only original AccuLine Pro™parts and accessories purchased from your AccuLine
Pro authorized dealer. Use of non-AccuLine Pro parts and accessories will void warranty.
4
©2007 Johnson Level & Tool
WARNING!
The tinted goggles are designed to enhance
the visibility of the laser beam. They DO NOT
offer protection to the eyes from direct exposure
of the laser beam.
CAUTION: If using this product with any type of tinted
goggles, please note safety warning below.
DANGER!
Class IIIa Laser Product
Max. Power Output: ≤5mW
Wavelength: 522-542nm
THIS TOOL EMITS LASER RADIATION.
DO NOT STARE INTO BEAM.
AVOID DIRECT EYE EXPOSURE.
©2007 Johnson Level & Tool
5
4. Location/Content of Warning Labels
6
©2007 Johnson Level & Tool
5. Location of Part/Components
Instrument
Laser Output
Window
Tilt “Manual Mode”
Rubber Cover
Tilt Manual Mode
Button
Power LED
On/Off Transportation
Lock Switch
360º Circle
Battery Case
Outlet LED
Outlet
Self-calibrating
Screw Portal
5/8” - 11 Screw
Thread
1/4” - 20 Screw
Thread
LED
©2007 Johnson Level & Tool
7
Bracket Nomenclature
Connecting the Bracket to the Main-Body
1. Make the threaded holes mutually aligned. Align the 5/8” - 11
and 1/4” - 20 knob and hole.
2. Tighten instrument on the bracket by turning the handwheel
clockwise.
LED
Power LED Lighted LED means power-on
Extinguished LED means power-off
Flashing LED means weak battery
Main-body
Fixing Bolt
Magnet
Screw/Nail
Hanging
Hole
1/4" - 20
screw thread
Fixing
Strap Slot
Laser
Connecting
Knob
5/8" - 11
screw thread
8
©2007 Johnson Level & Tool
Outlet LED Extinguished LED means no external power
Green LED means connected to external power or
battery is fully charged
Red LED means charging the battery
Tilt Manual Mode LED
Extinguished LED means the normal working state, and
the laser line will flash if out of the self-leveling range
Lighted LED means the laser is in the Tilt “Manual
Mode”. This turns off the out of level indicators
(sound and flash) and allows the operator to tilt the
unit for extreme slope
6. Operating Instructions
Battery Installation
Note: Always check to be sure that the on/off switch is in the off
position before removing and replacing batteries.
1. Open the battery-box cover and put in the battery pack into the
battery case according to polarity marked in the battery-box.
2. Snap the battery cover back on.
IMPORTANT: It is the responsibility of the user to verify the
calibration of the instrument before each use.
©2007 Johnson Level & Tool
9
Power Adapter Usage
By connecting to the adapter, without the battery pack, the outlet LED
light will turn green and the instrument will be powered by the
adapter. If the rechargeable batteries are in the battery box, they
will be charged in this way and the
outlet LED light will be red in the
course of charging. When the LED
light turns green, the
batteries are fully charged.
Power on/off
With the rechargeable batteries or the adapter connected, turn the
on/off switch clockwise, the power LED will light and the instrument
will project a green laser cross beam (as shown below). By turning
the on/off switch counter-clockwise, the power LED will go out
and the instrument will be powered off and the compensator will be
locked in place.
Note:
• Pay attention to the polarity of the batteries.
• Do not charge alkaline batteries to avoid explosion.
• Used (discharged) batteries are hazardous waste and should be
disposed of properly.
10
©2007 Johnson Level & Tool
7. Using the Product
The laser can turn around the center of the
scale 360 degrees.
The instrument can be placed on a
platform separately.
The instrument can be installed on
the bracket.
The instrument can be installed on a
tripod. (5/8” - 11 thread or 1/4” - 20
thread)
The instrument can be attached to a steel
plate while on its base.
The instrument can be fixed to a pipe
with the fixing strap while on its base.
Andere Handbücher für 40-6640
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere AccuLine Laser-Nivelliergerät Handbücher
AccuLine
AccuLine 40-6580 Bedienungsanleitung
AccuLine
AccuLine 40-6500 Bedienungsanleitung
AccuLine
AccuLine 40-6680 Bedienungsanleitung
AccuLine
AccuLine 40-6640 Bedienungsanleitung
AccuLine
AccuLine 40-6620 Bedienungsanleitung
AccuLine
AccuLine 40-6543 Bedienungsanleitung
AccuLine
AccuLine 40-6600 Bedienungsanleitung
AccuLine
AccuLine 40-6537 Bedienungsanleitung
AccuLine
AccuLine 40-6525 Bedienungsanleitung
AccuLine
AccuLine 40-6520 Bedienungsanleitung
AccuLine
AccuLine PRO 40-6522 Bedienungsanleitung
AccuLine
AccuLine 40-6620 Bedienungsanleitung
AccuLine
AccuLine 40-6527 Bedienungsanleitung
AccuLine
AccuLine 40-6926 Bedienungsanleitung
AccuLine
AccuLine 40-6910 22x Bedienungsanleitung
AccuLine
AccuLine 40-6602 Bedienungsanleitung
AccuLine
AccuLine 40-6662 Bedienungsanleitung
AccuLine
AccuLine 40-6502 Bedienungsanleitung
AccuLine
AccuLine 40-6780 Bedienungsanleitung
AccuLine
AccuLine 40-6910 Bedienungsanleitung
Beliebte Laser-Nivelliergerät Handbücher anderer Marken
Nedo
Nedo ET-5 Bedienungsanleitung
geo-FENNEL
geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung
LaserLiner
LaserLiner X2-Laser Bedienungsanleitung
Spectra
Spectra LL300N Bedienungsanleitung
geo-FENNEL
geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung
Nedo
Nedo Crossliner 4 Bedienungsanleitung
