Accurate Technology TERN2 Bedienungsanleitung

TERN2

OWNERS

MANUAL

Contents

Getting Acquainted ..............................3-4

Drag Variance, Filling the Spool, Rod Mounting ......5

Xtreme Casting Technology .........................6

Operation..........................................7

Line Capacities .....................................8

Twin Drag System ..................................9

Maintenance ......................................10

Warranty.......................................... 11

Getting Aquainted

Getting Acquainted

Frame

Handle

Arm

Shaft

Nut

Engagement

Lever

Sideplate

T-7 Torx Screws

Clicker

Button

Spool

Tension

Knob

Star Drag

Adjustment

 FIRST TWINSTARDRAG®TSD TECHNOLOGY

FOR A SMOOTH, POWERFUL DRAG

 ACCURATE

XTREME CASTING TECHNOLOGYTM

XCT FOR EASE OF CASTING FOR INCREASED

DISTANCE WITH LESS BACKLASHES

 ACCURATE®CVX®TECHNOLOGY FOR

LIGHTWEIGHT AND STRONG REELS

 MAIN GEAR BEARING SUPPORTMBS PATENT

PENDING FOR SMOOTHER,STRONGER

OPERATION

 STAINLESS STEEL GEARS FOR STRONG

CRANKING POWER

 6 ABEC 5 BEARINGS

 MADE OF 6061 T6 AIRCRAFT ALUMINUM FOR

STRENGTH AND LIGHTWEIGHT

 SIDE SPOOL TENSION ADJUSTMENT FOR FINE

TUNING OF SPOOL

XCT

MGBS

TwinStarDrag

Getting Acquainted Continued

Frame

Handle

Arm

Shaft

Nut

TwinStar

Drag

Main Gear

Bearing Support

Pinion

Gear

Main

Engagement

Lever

Sideplate

Spool

Reel

Bridge

Clicker

Button

Spool

Tension

Knob

Star Drag

Adjustment

XCT

MGBS

TwinStarDrag

Remember as line comes off the spool and diameter of line on reel lessens the drag will spike up. If you are starting with

10 lbs of drag and half the line is taken off the spool, the drag would now be at 20 lbs. This is not the time to adjust drag

for a higher setting as you take a chance losing the ﬁsh. Best to stay at your original setting and if necessary, back drag off

as last-ditch effort.

Filling the spool with line it's important to put it on evenly and with pressure. Loose line will end up causing problems

with line biting on itself and lost ﬁsh. Please go to a store that has a line machine for the ﬁrst ﬁlling and watch how they

do it. It will save you headaches in the future. The other important thing to know is when putting the line on the spool

make sure to put tape on the spool arbor so line attaches to it. Use a good knot like a uniknot or similar and make sure it

is cinched all the way down. This will help avoid line moving on the spool when ﬁghting a ﬁsh. Do not overﬁll the spool as

it will become hard to cast. Leave 1/8" to¼" gap to top of spool.

Mounting your reel to rod. Most of the new rods

have reel seats of heavy graphite material and will

hold reel securely in place once tighten.

This means you do not necessarily need to use

rod clamp but if you are going to all the parts are

enclosed to properly put clamp on rod.

TERN2

Drag

Variance

Filling

the Spool

Rod

Mounting

Rod Clamp

The Xtreme Casting Technology that is featured on all Tern2 reels, improving your casting every trip. The XCT makes an average caster look like a

seasoned vet. The weight system is always on within the race, located on the side plate of the reel. When the spool moves, the weights react to

maximize spool rotation depending on weight of the bait used it will go faster or slower to alleviate over runs. The weights on the spool are preset

to the size of the spool, we used 4 weights on the 300 and 400 size reels and 6 weights on the 500 and 600 sizes. Reel comes with 3 additional

weights in box. This being a centrifugal casting mechanism, to add or subtract weights the sideplate will need to be removed with caution not to

lose the weights that are located on side of spool. Once done you will need to carefully put sideplate back on reel without dropping weights from

the spool side.

You can go to Accurate YouTube channel and watch a video that will help you with this procedure. Remember that free spool on reel will not roll

on forever as weights are on to slow spool. Once you get a bait or lure on the line, you will see the true potential for casting difference of the design.

TERN2 Xtreme Casting Technology

Casting Weight

Spool Shaft

Casting Cage

ATD

TERN2

Operation

Main Drag

Lever Forward:

In Gear

Main Drag

Lever Back:

Free Spool

Adjust the Spool

Speed with Knurled Nob

Star Drag Pressure

Adjustment

***(See below)

The Tern2 is a star drag reel that has a in gear lever that pushed forward puts the reel in gear and pulled back is freespool.

If there is pressure on the spool, the spool lever will not pull back as the forward pressure on the spool will keep it

engaged. If you are trying to pull lever back into free spool you need to relieve any pressure on the spool (Line coming off

spool). This is a basic operation of any Star drag reel and it is important to remember when ﬁghting a ﬁsh.

Adjusting the spool speed with knurl spool knob, you should tighten it all the way and put reel in freespool. Let the bait or

lure hang off rod tip and slowly turn knob backwards until lure or bait slowly falls. This is a good setting to start and if you

feel like you need freer spool continue to turn knob backwards till you feel its set appropriate for your casting needs.

***When adjusting your star drag remember to set drag pressure over your rod with a scale on the tip attached to line.

Reel drag should be set to¼ or 1/3 the breaking strength of the line you are using. If you are using 30Ib braid set line to 7

to 10 lbs at strike.

TERN2

Line

Capacities

TERN2 (TXD) REELS

MODEL WEIGHT (oz) GEAR RATIO BRAID CAPACITY INCHES PER CRANK MAX DRAG

TXD-300X 14 6:1 325 yds / 30 lb 38″ 22

TXD-300 14 5:1 325 yds / 30 lb 30.5″ 22

TXD-400X 15 6:1 400 yds / 50 lb 38″ 24

TXD-400 15 5:1 400 yds / 50 lb 30.5″ 24

TXD-500XN 6:1 375 yds / 50 lb 45″ 26

TXD-500N 5:1 375 yds / 50 lb 35" 26

TXD-500X 17 6:1 350 yds / 65 lb 45″ 26

TXD-500 17 5:1 350 yds / 65 lb 35.5″ 26

TXD-600XN 6:1 425 yds / 65 lb 53″ 28

TXD-600N 5:1 425 yds / 65 lb 41.34″ 28

TXD-600X 6:1 375 yds / 80 lb 53 28

TXD-600 5:1 375 yds / 80 lb 41" 28

XCT

MGBS

TwinStarDrag

Our patented TwinStarDrag

technology utilizes carbon ﬁber drag

washers and stainless-steel friction washers on both sides of the gear to

create the strongest smoothest drag possible.

TwinStarDrag

SYSTEM

 PATENTED TWINSTARDRAG™ SYSTEM

 BILLET 6061  T6 ALUMINUM

 6 CLASS5 ABEC STAINLESS STEEL BEARINGS

 STAINLESS STEEL GEARS AND GEAR SHAFT

 LARGER, STRONGER GEAR SHAFT AND ANTIREVERSE BEARING

 TITANIUM DRAG FRICTION WASHERS

 UNHINDERED FREESPOOL AT EVERY DRAG SETTING

 GREASED ACCUDRAGS

 STAINLESS STEEL SPRINGS, SCREWS AND CLIPS

 COMFORTABLE RUBBER HANDLE

 1YEAR WARRANTY

 ACCUCARE REEL SERVICE

 PROUDLY DESIGNED, MANUFACTURED AND

ASSEMBLED IN THE USA

 LEFTHANDED MODELS AVAILABLE

TwinStarDrag

SYSTEM

EVEN DRAG PRESSURE

Drag

Pressure

Drag

Pressure

Friction Washers Drag Washers

The Tern2 has the TwinStarDragTM technology that is the first of its

type in a star drag reel. The dual surface drag is smoother, and more

powerful. The Tern2 also has a (MGBS) Main Gear Bearing support system

for a smoother, stronger operation. With all the added features we also

designed (XCT) Xtreme Casting technology for longer more precise casts

with less backlashes. This has been tested in west coast conditions with

excellent results. The new Tern2 is ready for time on the water.

Class 5 A.B.E.C. bearings in the Tern2 are Teﬂon impregnated in the ball bearing race, no lubrication is needed for these

bearings.

Rinse your Tern2 with a ﬁne spray of freshwater with reel in tighten drag position. Do not use heavy spray pressure as it

might force saltwater into reel. Do not completely submerge the reel into water. Wipe the exterior of the reel with a clean,

soft towel. If reel is on rod gently tap bottom of the rod on ground and wind reel quickly to get any excess water out.

Let reel dry out then take drag and loosen it as it still has a light drag, hold spool in position and turn handle around in

full circle a couple times. This will break all parts of reels apart that might have been affected by any salt sitting on it.

Once done you can lubricate reel at tension knob, lever, and Star Drag with a drop or two of reel lube included in box.

You can ﬁnd a video on Accurate’s YouTube channel under reel maintenance if you need any further help.

Periodically check all exterior screws to make sure they are tight.

We recommend yearly maintenance of your Tern2 with a service professional. Preventative maintenance will prolong life

of reel and make sure it is ready to catch the following season.

When storing reel back off drag and store with clicker in on position.

Maintenance

Engagement

Lever,

Grease

or Oil

Grease Torx Screws

Oil

Drop of Oil on

Threads of knob

Oil

TERN2

Inhaltsverzeichnis

Andere Accurate Technology Angelausrüstung Handbücher

Accurate Technology

Accurate Technology BX-400N Bedienungsanleitung

Accurate Technology

Accurate Technology VALIANT Bedienungsanleitung

Accurate Technology

Accurate Technology Platinum TwinDrag Reel Stücklistenhandbuch

Accurate Technology

Accurate Technology TWINSPIN REEL SR-20 Bedienungsanleitung

Accurate Technology

Accurate Technology TWINSPIN REEL SR-20 Stücklistenhandbuch

Beliebte Angelausrüstung Handbücher anderer Marken

Kongsberg

Kongsberg Simrad SY50 Bedienungsanleitung

Cannon

Cannon Magnum 5 ST Bedienungsanleitung

Jiffy

Jiffy Pro4 Lite Bedienungsanleitung

Fishmaster

Fishmaster Pro Series Kurzanleitung

MIVARDI

MIVARDI Carp Scout XL Bedienungsanleitung

FLAJZAR

FLAJZAR FISHTRON CatFish TX3 Bedienungs- und Wartungshandbuch

Milwaukee

Milwaukee 2873-20 Bedienungsanleitung

VEXILAR

VEXILAR FL-8SLT Bedienungsanleitung

Fishmaster

Fishmaster Casting Platform Kurzanleitung

Marcum Technologies

Marcum Technologies PanCam Bedienungsanleitung

Harmony

Harmony SlideTrax 8023061 Bedienungsanleitung

Quantum

Quantum Baitcast Reel Bedienungsanleitung

K-Drill

K-Drill Ice Auger Bedienungsanleitung

FISHING SPECIALTIES

FISHING SPECIALTIES Bowducer Bedienungsanleitung

Fox

Fox Receiver Bedienungsanleitung

Abu Garcia

Abu Garcia REVO MGX Bedienungsanleitung

Daiwa

Daiwa TanacomBull 1000 Bedienungsanleitung

Sealey

Sealey HP01 Bedienungsanleitung