Acer Altos G520 series Bedienungsanleitung

Acer Altos G520 series

User’s guide

BB!H631!.!FO/cppl!!Qbhf!j!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondense concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Acer Altos G520 series

User’s guide

1st Issue: July 2004

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

BB!H631!.!FO/cppl!!Qbhf!jj!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

iii

Notices

FCC notice

Class A devices do not have an FCC logo or FCC IDE on the label. Class B devices

have an FCC logo or FCC IDE on the label. Once the class of the device is

determined, refer to the following corresponding statement.

Class B equipment

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/television technician for help

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class A or Class B limits may be attached to this equipment.

Operation with noncertified peripherals is likely to result in interference to

radio and TV reception.

Caution! Changes or modifications not expressly approved by the

manufacturer could void the user’s authority, which is granted by

the Federal Communications Commission, to operate this server.

BB!H631!.!FO/cppl!!Qbhf!jjj!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class A/Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Laser compliance statement

The CD-ROM drive in this server is a laser product. The CD-ROM drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO

BEAM.

BB!H631!.!FO/cppl!!Qbhf!jw!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are provided

for ventilation; to ensure reliable operation of the product and to protect

it from overheating, these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should never be placed near or

over a radiator or heat register, or in a built-in installation unless proper

ventilation is provided.

6 This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

9 Never push objects of any kind into this product through chassis slots as

they may touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

10 Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks. Refer all

servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled into the product

c If the product has been exposed to rain or water

BB!H631!.!FO/cppl!!Qbhf!w!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal condition.

e If the product has been dropped or the cabinet has been damaged

f If the product exhibits a distinct change in performance, indicating a

need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or explosion.

Refer battery replacement to a qualified service technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from children and

dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in your

accessories box) for this unit. It should be a detachable type: UL listed/CSA

certified, type SPT-2, rated 7A 125V minimum, VDE approved or its

equivalent. Maximum length is 15 feet (4.6 meters).

BB!H631!.!FO/cppl!!Qbhf!wj!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

Contents

Notices iii

FCC notice iii

Laser compliance statement iv

Important safety instructions v

1 System tour 1

Product briefing 3

Processor 3

Memory subsystem 3

Storage 3

Graphics interface 4

Networking 4

I/O ports 4

Serial ATA ports 4

Caring features 5

Product specification summary 6

External and internal structure 7

Front bezel 7

Front panel 8

Rear panel 10

Internal components 12

System boards 14

Mainboard layout 14

Hot Plug HDD Cage backplane board layout (SCSI) 17

Hot Plug HDD Cage backplane board layout (SATA) 18

2 System setup 21

Setting up the system 23

Preinstallation requirements 23

Connecting peripherals 24

To connect the PS/2 keyboard 24

To connect the PS/2 mouse 25

To connect the VGA monitor 26

To connect the power cable 27

Turning on the system 28

Power-on problems 29

Operating system configuration 30

Network connection 31

Tower-to-rack option 32

Turning off the system 33

BB!H631!.!FO/cppl!!Qbhf!wjj!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

3 Upgrading the system 35

Upgrading the system 37

Installation precautions 37

Opening the server 39

Before opening the server 39

To open the front bezel 39

To remove the front bezel 39

To remove the side panel 41

Configuring the Hot Plug HDD cage 43

To remove the Hot Plug HDD cage 43

To install a hard disk into the carrier 45

To install the Hot Plug HDD cage 46

Configuring the non-Hot Plug HDD cage 49

To remove the cage 49

To install a hard disk into the cage 50

To install the cage 51

Installing and removing storage devices 52

To remove a 5.25-inch storage device 52

To install a 5.25-inch storage device 53

Upgrading the CPU 55

To remove a CPU with heatsink 55

Processor Sequence 56

To install a CPU with heatsink 56

Upgrading the system memory 59

To remove a DIMM 60

To install a DIMM 60

Replacing the Backup Battery 62

Installing an expansion card 64

To install an expansion card 64

Installing a redundant power supply module 66

To install a redundant power supply module 67

4 BIOS setup 69

BIOS setup 71

Entering BIOS setup 72

Main 74

Advanced 76

Processor Summary and Configuration 77

IDE Configuration 78

Floppy Configuration 83

Super I/O Configuration 84

USB Configuration 85

PCI Configuration 87

BB!H631!.!FO/cppl!!Qbhf!wjjj!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

Memory Configuration 88

Boot 90

Boot Settings Configuration 91

Boot Device Priority 92

Hard Disk Drives 94

Removable Devices 95

ATAPI CD/DVD Devices 96

Security 97

To set an Administrator/User password 99

To remove the User password 99

Server 100

System Management 102

Serial Console Features 103

Event Log Configuration 105

Exit 107

Upgrading the BIOS 109

Preparing for the Upgrade 109

Recording the Current BIOS Settings 109

Obtaining the Upgrade 109

Creating a Bootable Diskette 110

Creating the BIOS Upgrade Diskette 110

Upgrading the BIOS 110

Changing the BIOS Language 112

Recovering the BIOS 112

Manually Recovering the BIOS 112

Clearing the CMOS 113

Clearing the Password 114

BIOS Error Messages 115

BIOS POST Beep Codes 117

BIOS Recovery Beep Codes 229

Configuration and BIOS Select Jumpers 119

Appendix A: Troubleshooting 121

Resetting the System 123

Problems following Initial System Installation 123

First Steps Checklist 123

Hardware Diagnostic Testing 124

Verifying Proper Operation of Key System Lights 125

Confirming Loading of the Operating System 125

Specific Problems and Corrective Actions 126

Power Light Does Not Light 126

No Characters Appear on Screen 127

Characters Are Distorted or Incorrect 128

BB!H631!.!FO/cppl!!Qbhf!j !!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

System Cooling Fans Do Not Rotate Properly 128

Diskette Drive Activity Light Does Not Light 129

Optical Drive Activity Light Does Not Light 129

Cannot Connect to a Server 130

Problems with Network 130

System Boots when Installing PCI Card 131

Problems with Newly Installed Application Software 131

Problems with Application that Ran Correctly Earlier 132

Hard Drive(s) are not Recognized 132

Bootable CD-ROM Is Not Detected 133

LED Information 133

Appendix B: ASM Quick Installation Guide135

Installing ASM 137

System requirements 137

System setup 137

Appendix C: Altos G520 Rack Installation Guide139

System rack installation 141

Vertical mounting hole pattern 142

Screw types for rack installation 143

Installing the system into the rack 144

Appendix D: SATA RAID Configuration 147

Configuring the onboard SATA RAID 149

How to enable the onboard SATA RAID function 149

How to create RAID 1 volume 149

Loading onboard SATA RAID default setting 149

Appendix E: RAID Configuration 153

Configuring the SCSI/SCSI RAID HBA 155

How to use SCSI HBA setup utility 155

How to use SCSI RAID HBA setup utility 155

MegaRAID Configuration Utility 156

Appendix F: Diagnostic Code Checkpoints 159

POST Code Checkpoints 161

Bootblock Initialization Code Checkpoints 168

Bootblock Recovery Code Checkpoint 171

Index 175

BB!H631!.!FO/cppl!!Qbhf! !!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN

Andere Handbücher für Altos G520 series

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer Altos R720 Series Bedienungsanleitung

Acer

Acer R5250-Q2000 - Altos - 2 GB RAM Bedienungsanleitung

Acer

Acer Altos RM900 Bedienungsanleitung

Acer

Acer Altos G710 Bedienungsanleitung

Acer

Acer AR585 F1 Bedienungsanleitung

Acer

Acer Altos R920 Series Bedienungsanleitung

Acer

Acer Altos G300 Bedienungsanleitung

Acer

Acer HDS WMS100 Bedienungsanleitung

Acer

Acer Altos T350 F4 Bedienungsanleitung

Acer

Acer Altos G701 Bedienungsanleitung

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer AB460 F1 Bedienungsanleitung

Acer

Acer Altos R310 Bedienungsanleitung

Acer

Acer Altos T350 F2 Installationsanleitung

Acer

Acer AR320 F2 Bedienungsanleitung

Acer

Acer AC100 Bedienungsanleitung

Acer

Acer Altos R510 Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer Altos S300 Bedienungsanleitung

Acer

Acer Altos R510 Bedienungsanleitung

Acer

Acer AR360 F2 Bedienungsanleitung

Acer

Acer Altos 500 Series Bedienungsanleitung

Acer

Acer Altos R520 M2 Bedienungsanleitung

Acer

Acer Veriton 9100 Stücklistenhandbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung