Acer Altos R720 Series Bedienungsanleitung

Acer Altos R720 Series

User’s Guide

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your server. All correspondence concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Name :

Part Number:

Purchase Date:

Place of Purchase:

Acer Altos R720 Series

User’s Guide

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

Acer Altos R720

iii

Notices

FCC notice

Class A equipment

This device has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be required to

correct the interference at personal expense.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/television technician for help

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class A limits may be attached to this equipment. Operation

with noncertified peripherals is likely to result in interference to radio and TV

reception.

Caution! Changes or modifications not expressly approved by the

manufacturer could void the user’s authority, which is granted by

the Federal Communications Commission, to operate this server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice Canadian users

This device does not exceed the Class A limits for radio noise emissions from

digital apparatus set out in the interference-causing equipment standard

entitled “Digital Apparatus” ICES-003 of the Canadian Deparmment of

Communications.

Laser compliance statement

The DVD-ROM drive in this server is a laser product. The optical drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO

BEAM.

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are provided

for ventilation; to ensure reliable operation of the product and to protect

it from overheating, these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should never be placed near or

over a radiator or heat register, or in a built-in installation unless proper

ventilation is provided.

6 This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

9 Never push objects of any kind into this product through the chassis slots as

they may touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

10 Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks. Refer all

servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled on the product

c If the product has been exposed to rain or water

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal condition.

e If the product has been dropped or the chassis has been damaged

f If the product exhibits a distinct change in performance, indicating a

need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery type may present a risk of fire or

explosion. Refer battery replacement to a qualified service technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from children and

dispose of used batteries promptly.

Contents

Notices iii

FCC notice iii

Laser compliance statement iv

Important safety instructions v

1 System tour 1

Features summary 3

External and internal structure 7

Front bezel 7

Front panel 8

Rear panel 13

Internal components 16

System boards 17

Mainboard 17

Backplane and mid-plane board 19

System diagnostic LEDs 22

System jumpers 23

2 System setup 25

Setting up the system 27

Pre-installation requirements 27

Connecting peripherals 28

Turning on the system 29

Power-on problems 30

Configuring the system OS 31

Turning off the system 32

3 System upgrade 33

Installation precautions 35

ESD precautions 35

Pre-installation instructions 35

Post-installation instructions 36

Opening the server 37

Unlocking the front bezel 37

Removing and installing the front bezel 38

Removing and installing the top cover 40

Removing and installing the CPU air duct 42

Removing the CPU air dam 44

Removing and installing the air baffles 45

Removing and installing storage devices 48

Removing and installing a hard disk drive 48

viii

Removing and installing a slim-line optical drive 51

Installing and removing a FDD 56

Installing a tape drive 60

Installing a sixth HDD 62

Removing and installing a PCI card 65

Removing and installing the PCI riser assembly 65

Removing and installing the PCI riser board 67

Removing and installing a PCI card 69

Replacing a system fan 72

Upgrading the CPU 74

CPU upgrading guidelines 74

Upgrading the system memory 77

Memory module installation guidelines 77

DDR2 module population order 78

Installing and removing a power supply 81

Removing and installing an ARMC/3 module 84

Removing and installing the SAS

mid-plane board 87

Removing and installing the SAS/SATA backplane board 89

Configuring the integrated SAS hardware RAID

components 91

Removing and installing the RAID activation key 91

Removing and installing the RAID cache 92

Removing and installing the RAID BBU 94

4 BIOS setup 97

BIOS setup 99

Entering BIOS setup 100

Using the BIOS menus 102

Main 102

Advanced 104

Security 119

Server Management 121

Boot Options 125

Boot Manager 128

Error Manager 129

Exit 130

Upgrading the BIOS 132

5 Troubleshooting 133

Troubleshooting 135

Resetting the system 135

Problems following initial system installation 135

First steps checklist 136

Hardware diagnostic testing 137

Verifying proper operation of key system lights 137

Specific problems and corrective actions 138

Error beep codes 146

BIOS POST error beep codes 146

ARMC/3 module error beep codes 148

Diagnostic POST code LEDs 149

Appendix A: Acer Altos R720

rack installation guide 155

Setting up the system rack 157

System rack installation 159

Vertical mounting hole pattern 160

Installing the system into the rack 161

Appendix B: SAS hardware RAID

configuration 169

Configuring the integrated SAS hardware RAID 171

Index 173

Andere Handbücher für Altos R720 Series

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer AW2000h-AW175h F1 Bedienungsanleitung

Acer

Acer Altos G701 Bedienungsanleitung

Acer

Acer Altos R920 Series Bedienungsanleitung

Acer

Acer 930 Bedienungsanleitung

Acer

Acer Altos 900 Bedienungsanleitung

Acer

Acer AW2000ht-AW170ht F1 Bedienungsanleitung

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer Altos S300 Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer Altos 350 Bedienungsanleitung

Acer

Acer R5250-Q2000 - Altos - 2 GB RAM Bedienungsanleitung

Acer

Acer AR585 F1 Bedienungsanleitung

Acer

Acer AR380 F1 Series Bedienungsanleitung

Acer

Acer Altos R720 Series Bedienungsanleitung

Acer

Acer AR320 F2 Bedienungsanleitung

Acer

Acer HDS AMS200 Bedienungsanleitung

Acer

Acer Altos 1200LP Bedienungsanleitung

Acer

Acer Altos R510 Bedienungsanleitung

Acer

Acer Altos R500 Bedienungsanleitung

Acer

Acer AcerAltos 21000 Stücklistenhandbuch

Acer

Acer HDS WMS100 Bedienungsanleitung

Acer

Acer Veriton 9100 Stücklistenhandbuch

Acer

Acer AT110 F2 Bedienungsanleitung

Acer

Acer Altos G500 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung