Acer Altos R510 Bedienungsanleitung

Acer Altos R510

User’s Guide

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

herein and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondence concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Acer Altos R510

User’s Guide

1st Issue: December 2004

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

iii

Notices

FCC notice

Class A devices do not have an FCC logo or FCC IDE on the label. Class

B devices have an FCC logo or FCC IDE on the label. Once the class of

the device is determined, refer to the following corresponding

statement.

Class A equipment

This device has been tested and found to comply with the limits for a

Class A digital device pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This device generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

Operation of this device in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

However, there is no guarantee that interference will not occur in a

particular installation. If this device does cause harmful interference to

radio or television reception, which can be determined by turning the

device off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/television technician

for help

Shielded cables

All connections to other computing devices must be made using

shielded cables to maintain compliance with FCC regulations.

Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.)

certified to comply with the Class A or Class B limits may be attached to

this equipment. Operation with noncertified peripherals is likely to

result in interference to radio and TV reception.

Caution: Changes or modifications not expressly approved by

the manufacturer could void the user’s authority, which is granted

by the Federal Communications Commission, to operate this

server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Canadian users

This Class A/Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Laser compliance statement

The CD-ROM drive in this server is a laser product. The CD-ROM drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID

EXPOSURE TO BEAM.

Important safety instructions

Read these instructions carefully. Save these instructions for future

reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are

provided for ventilation; to ensure reliable operation of the

product and to protect it from overheating, these openings must

not be blocked or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or

heat register, or in a built-in installation unless proper ventilation

is provided.

6 This product should be operated from the type of power indicated

on the marking label. If you are not sure of the type of power

available, consult your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate

this product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the

total ampere rating of the equipment plugged into the extension

cord does not exceed the extension cord ampere rating. Also,

make sure that the total rating of all products plugged into the

wall outlet does not exceed the fuse rating.

9 Never push objects of any kind into this product through chassis

slots as they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock. Never spill liquid

of any kind on the product.

10 Do not attempt to service this product yourself, as opening or

removing covers may expose you to dangerous voltage points or

other risks. Refer all servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled into the product

c If the product has been exposed to rain or water

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions since improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to normal condition.

e If the product has been dropped or the cabinet has been

damaged

f If the product exhibits a distinct change in performance,

indicating a need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or

explosion. Refer battery replacement to a qualified service

technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from

children and dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in

your accessories box) for this unit. It should be a detachable type:

UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE

approved or its equivalent. Maximum length is 15 feet (4.6

meters).

Notices iii

FCC notice iii

Class A equipment iii

Shielded cables iii

Peripheral devices iv

Use conditions iv

Canadian users iv

Laser compliance statement iv

Important safety instructions v

1 System information 1

Product briefing 3

Processor 3

Memory subsystem 3

Storage 4

Graphics interface 4

Networking 4

I/O ports 4

Caring features 5

Product specification summary 6

2 System tour 7

System board 9

Connector and Header Locations 9

Configuration Jumpers 11

Serial Port Configuration Jumper 12

BIOS Select Jumper 13

Back Panel Connectors 14

External and internal structure 16

Front view (with bezel) 16

Front view (w/o bezel) 16

Front panel 17

Front Panel LED and Buttons description 17

Control Button Functions 18

LED Indicator Status 18

Rear view 20

Optional Peripherals 21

Internal components 22

3 Getting Started 23

Setting up the system 25

Preinstallation requirements 25

Contents

Selecting a site 25

Checking the package contents 25

System startup 26

Turning on the system 26

Turning off the system 26

Power-on problems 27

4 Configuring the system 29

Upgrading the system 31

Installation precautions 31

ESD precautions 31

Preinstallation instructions 31

Post-installation instructions 32

Opening the server 33

Before opening the server 33

Removing the Chassis Cover 33

Installing the Chassis Cover 35

Removing and Installing the Front Bezel 36

Removing the Front Bezel 36

Installing the Front Bezel 36

Removing and Installing the Processor Air Duct 37

Removing the Processor Air Duct 37

Installing the Processor Air Duct 37

Removing and Installing the Air Baffle 38

Removing the Air Baffle 38

Installing the Air Baffle 40

Installing and Removing a Hard Disk Drive 41

Installing a Fixed SATA Hard Disk Drive 41

Removing a Fixed SATA Hard Disk Drive 46

Installing a SATA or SCSI Hot-swap Hard Disk Drive 48

Removing a SATA or SCSI Hot-swap Hard Disk Drive 50

Installing or Removing a Floppy Drive 52

Installing a Floppy Drive into Slimline Bay (Backplane Installed)52

Removing a Floppy Drive from the Slimline Bay (Backplane In-

stalled) 55

Installing a Floppy Drive into Slimline Bay (No Backplane Installed)

Removing a Floppy Drive from the Slimline Bay (No Backplane In-

stalled) 60

Installing a Floppy Drive into the Converted Hard Drive Bay (Back-

plane Installed) 61

Removing a Floppy Drive from the Converted Hard Drive Bay64

Installing or Removing a DVD/CD-RW or CD-ROM Drive 66

Installing a DVD/CD-RW or CD-ROM Drive into Slimline Bay (Back-

plane Installed) 66

Removing a DVD/CD-RW or CD-ROM Drive from the Slimline Bay

(Backplane Installed) 68

Installing DVD/CD-RW or CD-ROM Drive into Slimline Bay (No

Backplane Installed) 69

Installing and Removing a PCI Riser Connector 72

Installing a PCI Riser Connector 72

Removing a PCI Riser Connector 74

Installing and Removing a PCI Add-in Card 76

Installing a PCI Add-in Card 76

Removing a PCI Add-in Card 77

Installing and Removing the SATA or SCSI Backplane (Optional)79

Removing the SATA or SCSI Backplane 79

Installing the SCSI or SATA Backplane 80

Processor Installation and Upgrade 83

Installing or Replacing the Processor 83

Installing the Processor 83

Installing the Heat Sink(s) 85

Removing a Processor 86

Memory Installations and Upgrade 87

Upgrading the system memory 87

Memory Sparing 89

Installing and Removing Memory 90

Installing DIMMs 90

Removing DIMMs 91

5 BIOS setup 93

Using the BIOS Setup Utility 95

Entering BIOS 95

If You Cannot Access Setup 95

Setup Menus 95

BIOS Setup Utility 96

BIOS Setup Keyboard Command Bar Options 97

Main 99

Advanced 101

Upgrading the BIOS 138

Preparing for the Upgrade 138

Recording the Current BIOS Settings 138

Obtaining the Upgrade 139

Upgrading the BIOS 139

Clearing the Password 139

Clearing the CMOS 140

6 Troubleshooting 143

Resetting the System 145

Problems following Initial System Installation 145

First Steps Checklist 145

Hardware Diagnostic Testing 146

Verifying Proper Operation of Key System Lights147

Confirming Loading of the Operating System 147

Specific Problems and Corrective Actions 147

Power Light Does Not Light 148

No Characters Appear on Screen 148

Characters Are Distorted or Incorrect 149

System Cooling Fans Do Not Rotate Properly 150

Diskette Drive Activity Light Does Not Light 150

CD-ROM Drive or DVD/CD-RW Drive Activity Light Does Not

Light 150

Cannot Connect to a Server 151

Problems with Network 151

System Boots when Installing PCI Card 152

Problems with Newly Installed Application Software152

Problems with Application Software that Ran Correctly Earli-

er 152

Devices are not Recognized under Device Manager (Win-

dows* Operating System) 153

Hard Drive(s) are not recognized 153

Bootable CD-ROM Is Not Detected 154

155

Appendix A: Management software installation157

Installing ASM 159

System requirements 159

ASM Agent 159

ASM Console 159

System setup 159

Installing ASM Agent (Windows version) 159

Installing ASM Console (Windows version) 160

Installing ASM Agent (Linux version) 160

Appendix B: Tool-less rail kit installation 163

Tool-less rail kit installation 165

Setting the Multi-Pin Adapters for Rack Type 165

Installing the Slide Rails into the Rack 166

Installing the Component into the Slide Rails 168

Cable Management ARM installation 169

Andere Handbücher für Altos R510

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer Altos G520 series Bedienungsanleitung

Acer

Acer Ferrari 1100 Series Bedienungsanleitung

Acer

Acer Veriton 9100 Bedienungsanleitung

Acer

Acer Network Device Altos R520 Bedienungsanleitung

Acer

Acer Altos R710 Bedienungsanleitung

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer AW2000h-AW175h F1 Bedienungsanleitung

Acer

Acer Altos 1200 Bedienungsanleitung

Acer

Acer Altos easyStore M2 Bedienungsanleitung

Acer

Acer WT 300 Bedienungsanleitung

Acer

Acer Altos G710 Bedienungsanleitung

Acer

Acer HDS AMS200 Bedienungsanleitung

Acer

Acer AR180 F1 Series Bedienungsanleitung

Acer

Acer M9N System Bedienungsanleitung

Acer

Acer 12000 Bedienungsanleitung

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer Altos G700 series Bedienungsanleitung

Acer

Acer G310 Altos Bedienungsanleitung

Acer

Acer Altos 19000PRO4 Stücklistenhandbuch

Acer

Acer Altos 900 Bedienungsanleitung

Acer

Acer Altos G500 Bedienungsanleitung

Acer

Acer Altos R500 Bedienungsanleitung

Acer

Acer Altos 350 Bedienungsanleitung

Acer

Acer AT350 F3 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung