Acer G310 Altos Bedienungsanleitung

Acer Altos G310

User’s guide

BB!H421!.!FO/cppl!!Qbhf!j!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondense concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Acer Altos G310 series

User’s guide

1st Issue: February 2004

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

BB!H421!.!FO/cppl!!Qbhf!jj!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

iii

Notices

FCC notice

Class A devices do not have an FCC logo or FCC IDE on the label. Class B devices

have an FCC logo or FCC IDE on the label. Once the class of the device is

determined, refer to the following corresponding statement.

Class B equipment

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/television technician for help

BB!H421!.!FO/cppl!!Qbhf!jjj!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class A or Class B limits may be attached to this equipment.

Operation with noncertified peripherals is likely to result in interference to

radio and TV reception.

Caution: Caution! Changes or modifications not expressly

approved by the manufacturer could void the user’s authority,

which is granted by the Federal Communications Commission, to

operate this server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class A/Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Laser compliance statement

The CD-ROM drive in this server is a laser product. The CD-ROM drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO

BEAM.

BB!H421!.!FO/cppl!!Qbhf!jw!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are

provided for ventilation; to ensure reliable operation of the

product and to protect it from overheating, these openings must

not be blocked or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or

heat register, or in a built-in installation unless proper ventilation

is provided.

6 This product should be operated from the type of power indicated

on the marking label. If you are not sure of the type of power

available, consult your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate

this product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the

total ampere rating of the equipment plugged into the extension

cord does not exceed the extension cord ampere rating. Also,

make sure that the total rating of all products plugged into the

wall outlet does not exceed the fuse rating.

9 Never push objects of any kind into this product through chassis

slots as they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock. Never spill liquid

of any kind on the product.

10 Do not attempt to service this product yourself, as opening or

removing covers may expose you to dangerous voltage points or

other risks. Refer all servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

BB!H421!.!FO/cppl!!Qbhf!w!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

b If liquid has been spilled into the product

c If the product has been exposed to rain or water

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions since improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to normal condition.

e If the product has been dropped or the cabinet has been

damaged

f If the product exhibits a distinct change in performance,

indicating a need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or

explosion. Refer battery replacement to a qualified service

technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from

children and dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in

your accessories box) for this unit. It should be a detachable type:

UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE

approved or its equivalent. Maximum length is 15 feet (4.6

meters).

BB!H421!.!FO/cppl!!Qbhf!wj!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

vii

Notices iii

FCC notice iii

Class B equipment iii

Laser compliance statement iv

Important safety instructions v

1 System information 1

Product briefing 3

Processor 3

Memory subsystem 3

Storage 4

Graphics interface 4

Networking 4

I/O ports 4

Serial ATA ports 5

Caring features 6

Product specification summary 7

2 System tour 9

System board 11

Mainboard layout 11

Jumper settings (JP8) clear CMOS 14

External and internal structure 15

Front bezel 15

Front panel 17

Rear panel 19

Internal components 21

3 Getting Started 23

Setting up the system 25

Preinstallation requirements 25

Selecting a site 25

Checking the package contents 25

System startup 26

Turning on the system 26

Turning off the system 27

Power-on problems 27

BIOS POST Checkpoint Codes 28

Bootblock Initialization Codes 28

Bootblock Recovery Codes 29

POST code checkpoints 31

Beep Codes 35

Contents

BB!H421!.!FO/cppl!!Qbhf!wjj!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

Contents

viii

4 Configuring the system 37

Upgrading the system 39

Installation precautions 40

ESD precautions 40

Preinstallation instructions 41

Post-installation instructions 41

Opening the server 42

Before opening the server 42

To remove the side panel 43

To remove the front panel 44

Installing and removing storage devices 45

To install a 5.25-inch storage device 45

Upgrading the CPU 47

To remove a CPU with heatsink 47

To install a CPU with heatsink 49

Upgrading the system memory 51

Memory configuration 51

To remove a DIMM 52

To install a DIMM 53

Reconfiguring the system memory 53

Installing an expansion card 54

To install an expansion card 54

Installing and removing a hard disk 57

To remove a hard disk 57

To install a hard disk 58

Configuring the SCSI/SCSI RAID HBA 59

How to use SCSI HBA setup utility 59

Loading HBA Default Settings 59

How to use SCSI RAID HBA setup utility 59

How To Create RAID 1 (Mirror) volume with a

Hot Spare Disk 59

RAID Volume Initialization 60

Exit and Restart the server 60

MegaRAID Configuration Utility 61

Load RAID Card Default Setting 61

Create RAID1 Volume 61

Assign Hot Spare Disk 62

Initialize RAID Volume 62

Save And Exit MegaRAID Configuration Utility 62

Configuring Parallel ATA and Serial ATA devices 63

ATA Operate Mode 63

Intel ICH5R Serial ATA RAID introduction 64

Parallel ATA and Serial ATA device configurations

supported by Intel ICH5R 64

BB!H421!.!FO/cppl!!Qbhf!wjjj!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

ATA Operate Mode BIOS configuration 64

Using the Intel RAID Option ROM 64

Creating, Deleting and Resetting RAID Volumes 64

Installation of Intel Application Accelerator RAID Utility71

RAID migration instructions 75

Create RAID Volume from Existing Disk 76

5 BIOS setup 81

BIOS setup 83

Entering BIOS setup 84

Main 86

Advanced 88

Peripheral Configuration 89

IDE Configuration 91

Primary IDE Master 93

Floppy Configuration 95

PCI/PnP Configuration 96

Boot Settings Configuration 98

OnBoard Device Configuration 101

Event Log Configuration 102

Remote Access Configuration 104

System Health Monitoring 105

Power 106

Boot 108

Boot Device Priority 109

Security 110

Exit 112

Appendix A: Management software installation115

Installing ASM 117

System requirements 117

ASM Agent 117

ASM Console 117

System setup 117

Installing ASM Agent (Windows version) 118

Installing ASM Console (Windows version) 118

Installing ASM Agent (Linux version) 119

Index 121

BB!H421!.!FO/cppl!!Qbhf!jy!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

Contents

BB!H421!.!FO/cppl!!Qbhf!y!!Xfeoftebz-!Gfcsvbsz!29-!3115!!5; 7!QN

Andere Handbücher für G310 Altos

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer AR380 F1 Series Bedienungsanleitung

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer Ferrari 1100 Series Bedienungsanleitung

Acer

Acer Altos 1200LP Bedienungsanleitung

Acer

Acer Altos R710 Bedienungsanleitung

Acer

Acer AC100 Bedienungsanleitung

Acer

Acer AW2000h-AW175h F1 Bedienungsanleitung

Acer

Acer Altos R520 M2 Bedienungsanleitung

Acer

Acer WT 300 Bedienungsanleitung

Acer

Acer R5250-Q2000 - Altos - 2 GB RAM Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer R310-U-P3200 - Altos - R310 Bedienungsanleitung

Acer

Acer Network Device Altos R520 Bedienungsanleitung

Acer

Acer 930 Bedienungsanleitung

Acer

Acer Altos G700 series Bedienungsanleitung

Acer

Acer Altos R360 F2 Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer Altos T350 F4 Bedienungsanleitung

Acer

Acer Altos 350 Bedienungsanleitung

Acer

Acer Altos 19000PRO4 Stücklistenhandbuch

Acer

Acer Altos R920 Series Bedienungsanleitung

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer AcerAltos 21000 Stücklistenhandbuch

Acer

Acer Altos R700 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung