Acer ALTOS R910 Series Bedienungsanleitung

Acer Altos R910 Series

User’s Guide

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your server. All correspondence concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Name :

Part Number:

Purchase Date:

Place of Purchase:

Acer Altos R910 Series

User’s Guide

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

Acer Altos R910

iii

Notices

FCC notice

Class A equipment

This device has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be required to

correct the interference at personal expense.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/television technician for help

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class A limits may be attached to this equipment. Operation

with noncertified peripherals is likely to result in interference to radio and TV

reception.

Caution! Changes or modifications not expressly approved by the

manufacturer could void the user’s authority, which is granted by

the Federal Communications Commission, to operate this server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice Canadian users

This device does not exceed the Class A limits for radio noise emissions from

digital apparatus set out in the interference-causing equipment standard

entitled “Digital Apparatus” ICES-003 of the Canadian Deparmment of

Communications.

Laser compliance statement

The DVD-ROM drive in this server is a laser product. The optical drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO

BEAM.

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are provided

for ventilation; to ensure reliable operation of the product and to protect

it from overheating, these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should never be placed near or

over a radiator or heat register, or in a built-in installation unless proper

ventilation is provided.

6 This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

9 Never push objects of any kind into this product through the chassis slots as

they may touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

10 Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks. Refer all

servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled on the product

c If the product has been exposed to rain or water

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal condition.

e If the product has been dropped or the chassis has been damaged

f If the product exhibits a distinct change in performance, indicating a

need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery type may present a risk of fire or

explosion. Refer battery replacement to a qualified service technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from children and

dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in your

accessories box) for this unit. It should meet the following criteria:

• An IEC 320 C13 connector to plug into the power supply on the server.

• For North America or similar electrical distribution systems: UL listed/

CSA certified, 16/3 type SJT/SO, with NEMA 6-15P SPT-2, or equivalent

attachment plug.

• For Europe or similar electrical distribution systems: VDE certified or

HAR rated 250V, 3 x 1.0mm2 minimum conductor size, rather for no

less than the product ratings.

• Maximum length is 14.76 feet (4.5 meters).

Contents

Notices iii

FCC notice iii

Laser compliance statement iv

Important safety instructions v

1 System tour 1

Features summary 3

External and internal structure 7

Front bezel 7

Front panel 8

Rear panel 15

Internal components 18

System boards 19

Mainboard 19

Backplane board 21

Hot-plug memory board 23

System jumpers 25

2 System setup 27

Setting up the system 29

Pre-installation requirements 29

Connecting peripherals 30

Turning on the system 31

Power-on problems 32

Configuring the system OS 33

Turning off the system 34

3 System upgrade 35

Installation precautions 37

ESD precautions 37

Pre-installation instructions 37

Post-installation instructions 38

Opening the server 39

Removing the front bezel 39

Installing the front bezel 40

Removing the top cover 40

Installing the top cover 41

Removing the CPU air baffle 42

Installing the CPU air baffle 43

Removing the center brace 44

Installing the center brace 45

viii

Removing a memory board air baffle 46

Installing a memory board air baffle 47

Configuring hot-pluggable components 48

Hard disk drives 49

System fan assembly 51

Power supply 53

Memory board 55

PCI card 59

Configuring cold-pluggable components 61

DVD drive 62

5.25-inch drive 64

Processor 65

Processor VRMs 70

Memory board 75

DIMM modules 77

PCI card 81

Fibre channel module 82

ARMC/3 or BMC module 84

SAS RAID adapter 86

Configuring the integrated hardware RAID components 88

SCSI hardware RAID components 88

SAS hardware RAID components 94

4 BIOS setup 101

Introduction 103

System options menu 104

BIOS setup 110

Using the BIOS menus 112

Main 112

Processor 114

Memory 117

Devices 123

Server Management 131

Security 136

Save, Restore & Exit 138

Upgrading the BIOS 139

5 Troubleshooting 141

Troubleshooting 143

Resetting the system 143

Problems following initial system installation 143

First steps checklist 144

Hardware diagnostic testing 145

Verifying proper operation of key system lights 145

Specific problems and corrective actions 146

Appendix A: Acer Altos R910

rack installation guide 155

Setting up the system rack 157

System rack installation 159

Vertical mounting hole pattern 160

Installing the system into the rack 161

Appendix B: Memory configuration options 169

Introduction 171

Installation and population order 172

Memory board installation order 172

DIMM module installation order 172

DIMM module population order 173

Memory modes 177

Maximum compatibility 178

Maximum performance 180

Memory sparing 182

Memory RAID 184

Memory mirroring 186

Appendix C: RAID configuration utilities 189

Overview 191

SCSI RAID configuration utility 192

SAS RAID configuration utility 194

Index 197

Andere Handbücher für ALTOS R910 Series

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer AR585 F1 Bedienungsanleitung

Acer

Acer AR320 F1 Series Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer Altos G710 Bedienungsanleitung

Acer

Acer Network Device Altos R520 Bedienungsanleitung

Acer

Acer Altos 1200 Bedienungsanleitung

Acer

Acer Altos G500 Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer Altos R920 Series Bedienungsanleitung

Acer

Acer AR320 Bedienungsanleitung

Acer

Acer AT110 F2 Bedienungsanleitung

Acer

Acer Altos G330 Series Bedienungsanleitung

Acer

Acer Altos easyStore M2 Bedienungsanleitung

Acer

Acer Extensa 500 Stücklistenhandbuch

Acer

Acer AR380 F2 Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer AR180 F1 Series Bedienungsanleitung

Acer

Acer AW2000h-AW170h Bedienungsanleitung

Acer

Acer Veriton 9100 Stücklistenhandbuch

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer 12000 Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer Altos 11000 System Bedienungsanleitung

Acer

Acer Veriton 9100 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung