Acnodes PCM8011 Bedienungsanleitung

User Manual

Embedded Computers

PCM8011

10.4" Military-Grade Panel PC

tel Celeron N2930 1.83GHz CPU

MIL-STD-461F / 810G Testing Compliance

For latest product information, please visit Acnodes’ website at www.acnodes.com.

14628 Central Ave. Chino, CA 91710 Tel: 909.597.7588

Fax: 909.597.1939

CHAPTER 1

Declaration

Please read this chapter with some important notice before operations.

FCC Regulation Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a class “a”

digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at him own expense.

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Disclaimer

We reserves the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s), conveys no

license or title under any patent, copyright, or masks work rights to these products, and makes

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in

this manual are for illustration purposes only. We make no representation or warranty that

such application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty that each of its products will be free from material and workmanship defects for a

period of one year from the invoice date. If the customer discovers a defect, we will, at its

option, repair or replace the defective product at no charge to the customer, provided it is

returned during the warranty period of one year, with transportation charges prepaid. The

returned product must be properly packaged in it’s original packaging to obtain warranty

service.

Customer Service

The user guide includes simple debug and trouble shooting. For system crack or serious

damage, please contact with your distributor, sales representative, or the customer service

center for technical support if you need additional assistance. You may have the following

information ready before you call:

Product serial number

Peripheral attachments

Description of complete problem

The exact wording of any error messages

Warranty

CAUTION

Read manual prior to installing the product. The operation of products depends on your

reading and following the information in this manual. Re-check your work prior to

operating the product.

EVENT

EFFECT

PREVENTION

Although the brightness is

good under sunlight, it

shines directly all day would

cause the panel damage.

You should avoid exposing

the computer under the

sunlight for whole working

hours.

If the product is close to

explosive environment or

such as on fire, the

overheat will cause the

product malfunction.

You should avoid placing

the product near explosive

or firing environment.

If the product is close to

the wet ground such as

grassplot, the moisture

between panel and glass

will make the product

malfunction.

You should avoid placing

the product on the ground.

Safety Instructions

Always completely disconnect the power cord from your chassis whenever you work

with the hardware. Do not make connections while the power is on. Sensitive

electronic components can be damaged by sudden power surges. Only experienced

electronics personnel should open the PC chassis.

Safety Instructions

Always ground yourself to remove any static charge before touching the CPU card. Modern

electronic devices are very sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or

static-shielded bag when they are not in the chassis.

Please read these safety instructions carefully.

• Please keep this user’s manual for later reference.

• Please disconnect this equipment from any AC outlet before cleaning. Do not

use acid or caustic liquid or spray detergents for cleaning. The good option is to use a damp cloth.

• Do not touch the LCD panel surface with sharp or hard objects.

• For pluggable equipment, the power outlet must be installed near the equipment and must be

easily accessible.

• Place this equipment on a reliable surface during installation. Dropping it or letting it fall could

cause damage..

• Make sure the voltage of the power source is correct before connecting the equipment to the

power outlet.

• Position the power cord so that people cannot step on it. Do not place anything over the power

cord.

• All cautions and warnings on the equipment should be noted.

• If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over-voltage.

• Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

Getting Started

The design allows you to use it in radical industrial environments – places

you would not take with normal commercial grade LCDs / Panel PCs. The

mechanical is designed to be embedded in various kind of equipment.

This chapter tells you will find instructions for the following procedures:

• Introduction

• Unpacking

• Installing the monitor

CHAPTER 2

2-1 Specification

Display

Size 10.4”

Active Display Area 211.2(H) x 158.4(V)

Pixel Pitch (mm) 0.264(H) x 0.264(V)

Display Colors

Resolution 1024 x 768

Brightness 350 nits (Default; 1,000-nits for optional)

Contrast Ratio 1,000:1 (typ.)

Viewing Angle 88/88/88/88 (L/R/U/D)

System

Processor Intel® Celeron® Bay Trail-M N2930 1.83GHz

System Memory 4GB DDR3L 1066/1333 SODIMM

System Chipset Intel® ATOM® SoC integrated

Storage Built-in 64GB mSATA SSD

Ethernet Dual Intel WG82574L GbE LAN

Touch 5-wire resistive touch screen (Default)

EMI Shield EMI Mesh filter applied

Power DC 9~36V with power isolation & surge protection

Operating System

Optional OS Windows 10 IoT Enterprise, Linux Support

Input/ Output (D38999 connector)

Serial Ports 1 x RS232 (D38999)

USB Ports 2x USB 2.0 (D38999)

1 x USB 2.0 (USB Type A receptacle)

Ethernet 1 x Gigabit LAN

Physical Buttons 1 x Power Button

1 x Reset Button

Mechanical Specification

Cooling System

Mounting

Dimensions

Fanless design

Wall mount/ VESA mount

300.0 x 248.0 x 77.0 (WxHxD)

16.2M

Operating Temperature

Operating Humidity

IP Rating

-20 to +60°C

5%~95% at 40°C (non-condensing, RH)

Full-IP67

Environmental Considerations

Power Input

Power Cord

9~36V DC Input

N/A

Power Specifications

2-2 I/O Layout

1. 2. 3.

No Connector No Description

D38999/24A98BN P1 DC Power Input

2 D38999/24WB35PN P2 2x USB,1x RS232, 1x LAN

3 D38999/USBFTV71G P3 USB2.0 TypeA Receptacle

2-3 OSD Keypad

2-4 Pin Definition

Power On/Off

Power LED Indicator

Storage LED Indicator

Reset Button

Pin# Pin Definition

AD+

BD-

C GND

1. Power Connector (D38999/24WA98PN)

2. Signal Connector (D38999/24WD35PN)

USB

RS232

LAN

Pin# Pin Definition Interface

14 TX_D1+

15 TX_D1-

16 RX_D2+

17 RX_D2-

18 BI_D3+

28 BI_D3-

29 BI_D4+

30 BI_D4-

Pin# Pin Definition Interface

27 CD

12 RXD

13 TXD

26 DTR

33 GND

34 DSR

35 RTS

36 CTS

37 RI

Pin# Pin Definition Interface

8 USB1_VCC

9 USB1_GND

10 USB1_D-

11 USB1_D+

22 USB2_VCC

23 USB2_GND

24 USB2_D-

25 USB2_D+

LAN1

USB

RS232

Inhaltsverzeichnis

Andere Acnodes Touchscreen Handbücher

Acnodes

Acnodes PC 8175 Bedienungsanleitung

Acnodes

Acnodes PC 8170 Bedienungsanleitung

Acnodes

Acnodes PC 8120 Bedienungsanleitung

Acnodes

Acnodes FPC 6150 Bedienungsanleitung

Acnodes

Acnodes PC 5151 Bedienungsanleitung

Acnodes

Acnodes PC 5150 Bedienungsanleitung

Acnodes

Acnodes PC 2120 Bedienungsanleitung

Acnodes

Acnodes PC9 A Series Bedienungsanleitung

Acnodes

Acnodes PC 1080 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

Acnodes

Acnodes PC 5171 Bedienungsanleitung

Acnodes

Acnodes FPC 5084 Bedienungsanleitung

Acnodes

Acnodes FPC 8104 Bedienungsanleitung

Acnodes

Acnodes FPC 8120 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

Acnodes

Acnodes FPC 8084 Bedienungsanleitung

Acnodes

Acnodes PCA80 Series Bedienungsanleitung

Acnodes

Acnodes FPC 7150 Bedienungsanleitung

Acnodes

Acnodes FPC 8077 Bedienungsanleitung

Acnodes

Acnodes FPC 8059 Bedienungsanleitung

Acnodes

Acnodes PC 1060 Bedienungsanleitung

Acnodes

Acnodes PCH3782 Bedienungsanleitung

Acnodes

Acnodes PANEL PC 1000 Bedienungsanleitung

Acnodes

Acnodes PC 8175 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung

FEC

FEC PP-9635 Bedienungsanleitung