ACTi R71CF-34 Bedienungsanleitung

Face Recognition Reader

User’s Manual

R71CF-31, R71CF-32, R71CF-33, R71CF-34

2019/09/23

www.acti.com

User’s Manual

TABLE OF CONTENTS

About this Manual............................................................................................... 4

Precautions......................................................................................................... 4

Regulatory Information........................................................................................ 5

Safety Instructions .............................................................................................. 7

1. Installation and Connections ...........................9

Installation Environment.................................................................................. 9

Installing with Gang Box.................................................................................. 9

Terminal Connection ...................................................................................... 12

2. Device Activation.............................................14

3. Basic Operation...............................................15

Application Mode Settings............................................................................. 15

General Parameters Settings......................................................................... 17

Communication Settings........................................................................... 17

System Settings........................................................................................ 19

User Management .................................................................................... 22

Managing User ......................................................................................... 25

Other Management................................................................................... 25

Appendix ...............................................................27

Tips When Collecting / Comparing Face Picture ......................................... 27

Position (Recommended Distance: 0.5 m)................................................ 27

Expression................................................................................................ 28

Posture ..................................................................................................... 28

Size........................................................................................................... 28

www.acti.com

User’s Manual

Tips for Installation Environment.................................................................. 29

Relationship Between Wake-Up Distance and Environment ...................... 30

www.acti.com

User’s Manual

About this Manual

This Manual is subject to domestic and international copyright protection. The manufacturer

reserves all rights to this manual. This manual cannot be reproduced, changed, translated, or

distributed, partially or wholly, by any means, without the prior written permission from the

manufacturer.

Precautions

Read these instructions

You should read all the safety and operating instructions before using this product.

Heed all warnings

You must adhere to all the warnings on the product and in the instruction manual. Failure to follow

the safety instruction given may directly endanger people, cause damage to the system or to

other equipment.

Servicing

Do not attempt to service this video device yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Trademarks

All names used in this manual are probably registered trademarks of respective companies.

Liability

Every reasonable care has been taken during the writing of this manual. Please inform your local

office if you find any inaccuracies or omissions. We cannot be held responsible for any

typographical or technical errors and reserve the right to make changes to the product and

manuals without prior notice.

Support

Should you have any questions, please do not hesitate to contact your local dealer.

Data Protection

During the use of the device, personal data will be collected, stored and processed. To protect

data, the development of devices incorporates privacy by design principles. For example, for

device with facial recognition features, biometrics data is stored in your device with encryption

method; As data controller, you are advised to collect, store, process and transfer data in

www.acti.com

User’s Manual

accordance with the applicable data protection laws and regulations, including without limitation,

conducting security controls to safeguard personal data, such as, implementing reasonable

administrative and physical security controls, conduct periodic reviews and assessments of the

effectiveness of your security controls.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

www.acti.com

User’s Manual

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with

"CE" and comply therefore with the applicable harmonized European standards

listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the

RoHS Directive 2011/65/EU

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed

of as unsorted municipal waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentation for specific battery information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see: www.recyclethis.info

www.acti.com

User’s Manual

Safety Instructions

Warnings

All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local region.

Please use the power adapter, which is provided by normal company. The power

consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause

over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire, install or

dismantle the device.

When the product is installed on wall or ceiling, the device shall be firmly fixed.

If smoke, odors or noise rise from the device, turn off the power at once and unplug the

power cable, and then please contact the service center. 

If the product does not work properly, please contact your dealer or the nearest service

center. Never attempt to disassemble the device yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)



Cautions

Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or

places subject to shock (ignorance can cause equipment damage).

Do not place the device in extremely hot (refer to the specification of the device for the

detailed operating temperature), cold, dusty or damp locations, and do not expose it to

high electromagnetic radiation.

The device cover for indoor use shall be kept from rain and moisture.

Exposing the equipment to direct sun light, low ventilation or heat source such as heater

or radiator is forbidden (ignorance can cause fire danger).

Do not aim the device at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfunction however), and affecting the endurance of sensor at

the same time.

Please use the provided glove when open up the device cover, avoid direct contact with

the device cover, because the acidic sweat of the fingers may erode the surface coating

of the device cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the device

cover, do not use alkaline detergents.

www.acti.com

User’s Manual

Please keep all wrappers after unpack them for future use. In case of any failure

occurred, you need to return the device to the factory with the original wrapper.

Transportation without the original wrapper may result in damage on the device and lead

to additional costs.

Improper use or replacement of the battery may result in hazard of explosion. Replace

with the same or equivalent type only. Dispose of used batteries according to the

instructions provided by the battery manufacturer.

Biometric recognition products are not 100% applicable to anti-spoofing environments. If

you require a higher security level, use multiple authentication modes.

Indoor and outdoor use. If installing the device indoors, the device should be at least 2

meters away from the light, and at least 3 meters away from the window or the door. If

installing the device outdoors, you should apply Silicone sealant among the cable wiring

area to keep the raindrop from entering.

www.acti.com

User’s Manual

Thank you for purchasing ACTi products. The following documentation covers the installation and

configuration of your device.

NOTE: The accuracy of the analytics algorithm may be affected by different environmental

factors or inappropriate installation. Please follow the procedures in this guide. ACTi will

not be held liable for inaccuracies resulting from the aforesaid causes.

1. Installation and Connections

Installation Environment

If installing the device indoors, the device should be at least 2 meters away from the light,

and at least 3 meters away from the window or the door.

If installing the device outdoors, you should apply silicone sealant to protect the cable

wiring area to keep raindrop from entering.

Make sure the environment illumination is more than 100 Lux.

NOTE: For more details about the installation environment, see Tips for Installation

Environment on page 29.

Installing with Gang Box

The device can be directly installed on a wall with gang box.

1. According to the Datum line on the drill template, stick the drill template on the surface at

1.4 meters higher than the ground.

www.acti.com

User’s Manual

2. Drill the holes on the surface according to the drill template and install the gang box.

3. Using the two (2) supplied screws, secure the mounting plate on the gang box. And use

another four (4) supplied screws to secure the mounting plate on the wall.

4. Route the cables through the cable hole of the mounting plate, and connect to the

corresponding external devices’ cables.

NOTE: If installing outdoors, make sure to apply Silicone sealant on the cable wiring area

to keep raindrops from entering.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACTi IP-Zugriffskontrollsysteme Handbücher

ACTi

ACTi R21CF-32 Bedienungsanleitung

ACTi

ACTi R21CF-31 Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung