ACTi ECD-200 Bedienungsanleitung
Quick Installation Guide
ECD-200
16-Channel Megapixel H.265 Video Decoder
with RJ-45 Video Input, HDMI Video Output
V18.1213
Thank you for purchasing ACTi Video Decoder. This guide contains all the
information you need to quickly set up the device via local display interface.
For detailed instructions on installation and operation, please search for the
product manuals on http://www.acti.com/downloadcenter.
The items below are required for installation:
• Network cameras
• Monitor (with HDMI or VGA input and the cable)
• Network cables
• Network switch
• USB Mouse
• USB Keyboard (optional)
• Screwdriver
If you have any problems during installation, please contact us via
https://www.acti.com/CHD or US/Canada toll-free number: 1-866-410-2284
(ACTI)
This package includes the following items:
• Video Decoder
• Screw Pack
• Cable Straps
• Mounting Bracket
• Power Adapter
• Power Cord
• Terminal Blocks
• Warranty Card
UNPACK
1
BEFORE YOU START
Quick Installation Guide 3
1 LED Indicators
- Power LED (blue)
- System LED (orange)
- Hard Disk LED (green)
2 Audio Ouput
3 Memory Card Slot
4 Audio Input
5 Reset Button
AT A GLANCE
2
3 5 6 7 8
1 2
4
9
10 11 12
6 DC 12V Power Connector
7 RS-232 Connector
8 Digital Input / Output Connector
9 USB 3.0 (2)
10
HDMI Connector
11
Ethernet Connector
12
VGA Connector
4 Quick Installation Guide
3
INSTALLATION
The device can be mounted in three ways: Surface Mount, Pole Mount, or VESA
Mount.
How to Surface Mount?
Use the six (6) supplied screws with tox to
securethedeviceonaatevensurface.
How to Install with VESA Mount?
1. Place the device in between a VESA
mount (10 x 10) with the top side of
the device facing the monitor while the
bottom side facing the VESA mount.
2. Attach the four (4) supplied bolts to
secure the device.
How to Use the Pole Mount?
1. With the smooth side outwards, insert the
cable straps through the holes (A-B-C-D).
NOTE: Use the inner A and D holes if
mounting on a pole with 1-inch diameter
or the outer holes for a 2-inch diameter
pole.
2. Align the pole mount to the pole.
A
B
C
D
3. Insert the cables through the
latches and push all the way until
theytsnuglytothepole.
4. Secure the four (4) supplied bolts to
attach the device to the mount.
Quick Installation Guide 5
4
CONNECT THE DEVICE
The example below displays a network with the Video Decoder and basic
required peripherals to start using the device.
Default IP Address
10.0.0.10
5
LOGIN
USB Devices
HDMI Monitor
Power Source
Network Switch
10.0.0.10310.0.0.100 10.0.0.101 10.0.0.102
Network Cameras
DEVICE
Account: admin
Password: 123456
“123456” is the default password of the
administrator’s user account. For security
reasons, please remember to change it.
1. Connect the device to a power source. Once connected, the device
automatically turns on.
2. On the Login screen, using the on-screen keyboard, type the Account and
Password.
Done
Numeric Keypad
6 Quick Installation Guide
6
THE USER INTERFACE
7
CHANGE IP ADDRESS
If your network has a DHCP server, the device will obtain the IP address
automatically. In this case, skip to the next step to continue setting up your
device. If you want to assign a different static IP address, change the IP address
manually.
1. Click > Network >
Ethernet.
2. On Connection Type,
select Manual.
3. Set the IP address and
Subnet Mask.
4. Click Save.
Device
List Live View
User System Date & Time
System Setup
Full Screen
Capture Screenshot
Logout
Power Off
View Grid
DI1 and DI2 Status Indicators: Lights
green when DI1 or DI2 is active
LAN
Press to manually
trigger DI1 / DI2
Quick Installation Guide 7
8
ADD CAMERAS
1. On the Live View screen, click Add.
2. Click Add Camera from the pop-up menu.
Or, click other network devices to add them in the ENR. You may also group
devices by creating a group. However, for this quick installation guide, we will
only cover adding cameras in general.
3. Click a model to select the camera. The text of the selected camera will turn
orange.
4. Repeat the above step to add more cameras.
5. Click Add to complete.
Make sure to
input the correct
account and
password here.
Add Camera Manually
If you are adding cameras located in another network, click Add Camera
Manually. Fill in the IP address, HTTP Port, Account and Password. Then click
Add. Or, use the RTSP page for RTP protocol.
8 Quick Installation Guide
CHECK LIVE VIEW
9
After adding the cameras, the models are listed on the left panel of the Live
View screen.
1. Create a page view on the right panel, click . Use to modify
how many channels you want to see on the live view screen.
2. Drag a model to the Live View screen.
Double-click the page
tab to rename it.
Right-click on a channel to
access the pop-up menu.
NOTE: Menu options vary
depending on camera model.
Use these buttons to modify
how many channels you want to
see on the live view screen.
Quick Installation Guide 9
10
MANAGE DEVICES
Managing the devices can be done from the Live View screen. Right-click on the
device model from the left panel, then click to:
• Rename the device name on the list
• Delete the device from the list
• Setup the camera settings (see below)
Camera Settings
From the Camera Settingsscreen,clickthecorrespondingpagetabtocongure
video settings and set up motion detection and other settings.
To modify the camera settings, click
Get Camera Settings. Modify as
needed, then click Apply.
• Toconguremotionsetup,click
Setup.
• To resize the detection area, drag
the box on the lower right corner
of the area.
To set the event trigger, double- click
the Edit icon .
The Schedule page tab is reserved
for future project-based requirements
needing recording functions.
10 Quick Installation Guide
SYSTEM SETUP
11
Administratorscancongurethedevicethroughitssystemsetup.
1. On the Live View screen, click the Setup icon on the bottom left corner of
the screen.
2. On the Setup screen, click a menu page tab to access the settings:
• System: Includes system information, date and time, email settings, etc.
• Network:Includesnetworkrelatedcongurations.
• Storage: This page is reserved for future project requirements.
• Controller:Includeskeyboardconguration.
• Maintenance:Includesrmwareupgradeandfactoryresetsettings.
• Permission: Includes users persmission setup.
• Log: Lists the system log of the device.
Due to continuous product improvements, some contents may have changed
from the time time this documentation was printed. Download the latest
documentation, which shall prevail over the printed version provided in the
package, from http://www.acti.com/downloadcenter.
Inhaltsverzeichnis
Andere ACTi Medienkonverter Handbücher
ACTi
ACTi ACD-2100T Bedienungsanleitung
ACTi
ACTi ACD-3100 Bedienungsanleitung
ACTi
ACTi TCD-2100 Bedienungsanleitung
ACTi
ACTi V21 Bedienungsanleitung
ACTi
ACTi SED-3320 Bedienungsanleitung
ACTi
ACTi ACD-2400 Bedienungsanleitung
ACTi
ACTi A1D-M2N-V2.05.12-AC Bedienungsanleitung
ACTi
ACTi V21 Bedienungsanleitung
ACTi
ACTi V31 Bedienungsanleitung
ACTi
ACTi ECD-1000 Bedienungsanleitung
