ACTi B419-P2 Bedienungsanleitung
Zoom Bullet Camera
Hardware Manual
B419-P2
2021/01/26
www.acti.com
Hardware Manual
2
Table of Contents
Precautions 3
Safety Instructions ...........................................................................5
Introduction 6
Package Contents.............................................................................6
Physical Description ........................................................................7
Installation Procedures 8
Step 1: Install the Camera................................................................8
Step 2: Waterproof the Ethernet Cable .........................................10
Using the Cable Gland.................................................................10
Step 3: Connect to Network...........................................................13
Step 4: Access the Camera Live View...........................................13
Other Connections 14
Connecting a Power Adapter (Optional).......................................14
Connecting Digital Input / Output Devices (Optional) .................15
Connecting Audio Devices (Optional)...........................................17
Other Accessories 18
How to Install / Remove the Memory Card ...................................18
Accessing the Camera 19
Configure the IP Addresses...........................................................19
Using DHCP Server to Assign IPAddresses................................19
Using the Default Camera IPAddress..........................................21
Access the Camera.........................................................................23
www.acti.com
Hardware Manual
3
Precautions
Read these instructions
Read all the safety and operating instructions before using this product.
Heed all warnings
Adhere to all the warnings on the product and in the instruction manual. Failure to follow the
safety instructions given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
ACTi and ACTi logo are registered trademarks of ACTi Corporation. All other names and
products used in this manual are registered trademarks of their respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local office if you find any inaccuracies or omissions. ACTi will not be held responsible for any
typographical or technical errors and reserves the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
4
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
www.acti.com
Hardware Manual
5
Safety Instructions
Cleaning
Disconnect this product from the power supply before cleaning.
Accessories and Repair Parts
Use only the accessories and repair parts recommended by the manufacturer. Using other
attachments not recommended by the manufacturer may cause hazards.
Water and Moisture
Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a
dry place protected from weather.
Servicing
Do not attempt to service this product yourself. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the product.
3) If the inner parts of product have been directly exposed to rain or water.
4) If the product does not operate normally even by following the operating instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as improper
adjustment of other controls may result in damage, and will often require extensive work
by a qualified technician to restore the product to its normal operation.
Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine if the product is in proper operating condition.
www.acti.com
Hardware Manual
6
Introduction
Package Contents
Camera
Mounting Screw Kit
Cable Gland with Washer
Wrench
Drill Template
Quick Guide &
Warranty Card
Drill Template
Warranty Card
www.acti.com
Hardware Manual
7
Physical Description
Item
Description
1
Ethernet Port
Connects to a network using a standard Ethernet cable.
2
Digital Input/ Output
Connects to digital input and output device, such as an alarm
trigger, panic button, LED light, etc.
3
Audio Input / Output
Connects to an audio input and output device, such as a
microphone and speaker.
4
DC 12V Power
Connects to an external DC 12V power adapter.
5
Reset Button
Press and hold the reset button to restore the camera factory
default settings.
6
Analog Video Output
Connects to a video output device, such as a camera installation
kit or monitor for testing. Use the bundled video output connector
to connect to an external monitor. This connection is used for
installation only.
7
Memory Card Slot
Insert a memory card into the slot for local recording.
www.acti.com
Hardware Manual
8
Installation Procedures
Step 1: Install the Camera
1. Mark the screw holes or attach the bundled drill template on the target surface.
NOTE: Depending on the surface where you will install the camera, it may be necessary to
drill four (4) holes and use the supplied screw tox.
2. If the cable will pass through the surface, drill the cable hole as indicated on the drill
template. If the cable will be routed along the surface, route the cable through the gap
on the bracket. For outdoor installations, you may need to purchase the optional junction
box to protect the cables, contact ACTi Sales for details.
3. Mount the camera to the surface using four (4) screws.
4. Loosen the screw to tilt, pan, or adjust the camera orientation.
www.acti.com
Hardware Manual
9
5. Adjust the camera angle and orientation.
Sample of Wall Installation Sample of Ceiling Installation
6. Tighten the screw to fix the tilt angle position.
or
www.acti.com
Hardware Manual
10
Step 2: Waterproof the Ethernet Cable
If the camera will be installed outdoors, ensure that the cable connections and the network
side cable itself are protected from water and other environmental factors.
Use the bundled cable gland for the Ethernet connector and use waterproof tape to protect the
other cable connection. An optional Junction Box is available for purchase, contactACTi sales
for details.
Using the Cable Gland
This section describes how to waterproof the cable-out or “pigtail” of the camera using the
bundled cable gland.
Perform the following to waterproof the “pigtail” using the cable gland:
1. Attach the washer to the Ethernet connector of the camera.
2. Detach the clamping nut and sealing insert from the gland body:
Gland Body
Clamping Nut
Sealing Insert
Inhaltsverzeichnis
Andere ACTi Sicherheitskamera Handbücher
ACTi
ACTi VER. 061030 CAM-6500 Gebrauchsanweisung
ACTi
ACTi ACM-3601 Bedienungsanleitung
ACTi
ACTi TCM-5001 Gebrauchsanweisung
ACTi
ACTi ACM-7511 Bedienungsanleitung
ACTi
ACTi A92 Bedienungsanleitung
ACTi
ACTi TCM-7811 Bedienungsanleitung
ACTi
ACTi D71 Bedienungsanleitung
ACTi
ACTi A81 Bedienungsanleitung
ACTi
ACTi TCM-3401 Bedienungsanleitung
ACTi
ACTi D21V Bedienungsanleitung
ACTi
ACTi D71 Bedienungsanleitung
ACTi
ACTi ACM-3401 Series Bedienungsanleitung
ACTi
ACTi Q51 Bedienungsanleitung
ACTi
ACTi E13 Bedienungsanleitung
ACTi
ACTi KCM-5511 Gebrauchsanweisung
ACTi
ACTi I99 Bedienungsanleitung
ACTi
ACTi KCM-8211 Bedienungsanleitung
ACTi
ACTi ACM-7511 Gebrauchsanweisung
ACTi
ACTi TCM-1231 Series Gebrauchsanweisung
ACTi
ACTi E616 Bedienungsanleitung
