ActionTec 11 Mbps Wireless Access Point Bedienungsanleitung
11 Mbps
Wireless Access Point
User’s Manual
1
Table of Contents
I. Introduction 2
II. Contacting Technical Support 3
III. Introduction to Wireless Networks 4
IV. Installing the Actiontec 11 Mbps Wireless Access Point 7
V. Configuring the Actiontec 11 Mbps Wireless Access Point 11
VI Troubleshooting 21
VII Frequently Asked Questions 22
VIII Regulatory Notes and Statements 24
IX Warranty Statements 26
Proprietary Notice and Disclaimer
Unless otherwise noted, this document and the information herein disclosed are proprietary
to Actiontec Electronics, Inc the manufacturer. Any person or entity to whom this document
is furnished or who otherwise has possession thereof, by acceptance agrees that it will not be
copied or reproduced in whole or in part, nor used in any manner except to meet the purposes
for which it was delivered.
The information in this document is subject to change without notice and should not be con-
strued as a commitment by Actiontec the manufacturer. Although Actiontec the manufacturer
will make every effort to inform users of substantive errors, Actiontec the manufacturer dis-
claims all liability for any loss or damage resulting from the use of this document or any hard-
ware or software described herein, including without limitation contingent, special or inci-
dental liability.
Note: PC is a trademark of IBM Corporation. Windows 98 and 98 SE is a trademark of
Microsoft Inc. All other brand or product names and logos used in this manual are trademarks
or registered trademarks of their respective holders.
Table of Contents
0530-0320-000
Page
l
2Introduction
Thank you for purchasing the Actiontec 11 Mbps Wireless Access Point. This Wireless
Access Point is easy to use and easy to setup. If you like the freedom of accessing your net-
work from anywhere within your home or office, then take your networking to the next
level with the Actiontec 11 Mbps Wireless Access Point. You will be able to have full access
to your network and share files, printers and even your High-Speed Internet access.
Package Contents
Make sure the following items came in this package:
Actiontec 11 Mbps Wireless Access Point and power adapter
Actiontec 11 Mbps Wireless Access Point Installation CD-ROM
This User’s Manual and Quick Start Installation Guide
Warranty Card
Minimum System Requirements
PC Computer with an Ethernet Adapter configured for TCP/IP.
Internet Browser (Microsoft Explorer, Netscape Navigator, etc..).
Microsoft Windows 2000/Windows Millennium Edition, Windows 98, Second
Edition (SE), XP/Windows NT 4.0
Introduction
ll
3
Contacting Technical Support
Actiontec Electronics prides itself on making high-quality, durable, high-performance
products. If you should need assistance, the Actiontec Technical Support Department is
available seven days a week from 6 am to 11pm (Mountain Time), to provide profes-
sional support.
Contacting Technical Support
Actiontec Electronics, Inc.
760 N. Mary Avenue
Sunnyvale, CA 94085
lll
4Introduction to Wireless Networks
A wireless network connects computers to each other using radio technology that
allows you the freedom to move around the area and to work anywhere within reach
of an Access Point.
The Actiontec 11 Mbps Wireless Access Point can be connected to a wired network,
allowing communication between the wired network and computers using Actiontec
11 Mbps Wireless PC Cards. This technology is an extension to the existing Ethernet
networking standard, so you can connect the Actiontec Wireless Access Point to an
existing Ethernet network.
Adding Access Points to Your Network
Placement and connection of the Actiontec Wireless Access Point depends entirely on
your specific (network) environment. The Actiontec Wireless Access Point can be
used for the following configurations:
Creating a wireless network.
Extending an existing wired Ethernet network.
Connecting to a single computer.
Creating a Wireless Network
Your Actiontec Wireless Access Point can be used to setup a wireless network as
shown in Figure 1. Follow the steps below to create a wireless network.
Introduction to Wireless Networks
Figure 1: Creating a Wireless Network
lll
5
Introduction to Wireless Networks
Note: Refer to the appropriate user manual for successful installation of your
wireless network.
1. Prepare one computer that you will want to connect wirelessly.
(Install wireless network card and software).
2. Configure the IP settings for this client computer.
3. Install the Actiontec Wireless Access Point.
4. Your 802.11b wireless network is now ready.
5.For further functionality and security, the Actiontec Wireless Access Point
can be configured using the Actiontec Wireless Access Point Configuration util-
ity and the Web Interface.
6. Install other client computers if this is applicable to your environment
Extending a Wired Network with One or More WirelessAccess Points
When the Actiontec Wireless Access Point is used as an extension to a wired network
(figure 2), please make sure that the current wired network is completely
functional.
Follow these steps to extend you wired network:
1. Install the Actiontec Wireless Access Point and connect it to your wired network
via an open Ethernet port in your switch or hub.
2. You can now use the wireless network.
Figure 2: Extending a Wired Network
lll
6Introduction to Wireless Networks
3. For further functionality and security, the Actiontec Wireless Access Point can
be configured using the Actiontec Wireless Access Point Configuration
utility and the Web Interface
4. Install the wireless client computer(s).
Connecting an Access Point Directly to a Computer
Your Actiontec Wireless Access Point can be connected directly to your computer
as shown in figure 3.
Note: Refer to the appropriate user manual for successful installation of your wireless
network.
Follow these steps to connect your Actiontec Wireless Access Point directly to your
computer:
1. Install a network interface card (NIC) in the computer you want to connect the
Actiontec Wireless Access Point to.
2. Configure the IP settings for this client.
3. Install the Access Point.
Note: For this connection you need to use a cross-over Ethernet cable.
4. You can now use the wireless network.
5. For further functionality and security, the Actiontec Wireless Access Point can
be configured using the Actiontec Wireless Access Point Configuration
utility and the Web Interface.
6. Install the wireless client computer(s).
Figure 3: Connecting Directly to a Computer
lV
7
Installing the Actiontec Wireless Access Point
This equipment is designed with the utmost care for the safety of those who install
and use it. However, special attention must be paid to the dangers of electric shock
and static electricity when working with electronic equipment. All guidelines in
this manual and of the computer manufacturer must therefore be followed at all
times to ensure the safe use of the equipment.
Physical Installation of the Actiontec 11 Mbps Wireless Access Point
For the best performance and range, the Actiontec Wireless Access Point needs to
be placed in an upright vertical position as shown in Figure 4.
Installing the Wireless Access Point
Important Notice
This device is a 2.4 GHz low power RF device intended for home and office use in
all EU member states except in France where restrictive use applies. For further
information, refer to “Regulatory notes and statements”
Figure 4: Actiontec 11 Mbps Wireless Access Point
lV
8Installing the Actiontec Wireless Access Point
The Actiontec Wireless Access Point can be installed in 2 different ways:
On a desktop.
Determine a clear area on your desktop where the Actiontec Wireless Access
Point can be placed in an upright position clear of obstructions.
Mounted on a wall.
Prior to drilling holes into a wall, make sure the wall area of interest is clear of
electrical wiring or water pipes.
Determine the position of the screws and mark with a pencil.
Drill holes in the wall at the location of the marks.
Insert plastic lugs into the holes
Fasten the screws into the plastic lugs, making sure to leave a 3mm distance
as clearance between the wall and screw heads.
Mount the Actiontec Wireless Access Point onto the screws.
.
Figure 5: Actiontec Wireless Access Point on a desktop
Figure 6: Actiontec Wireless Access Point on a wall
lV
9
Installing the Actiontec Wireless Access Point
Connecting the Access Point to a Network
Now that your Actiontec Wireless Access Point has been installed, it is ready to be
connected to the power outlet and to your wired network.
1. Attach the power adapter output connector to the Actiontec Wireless Access
Point, plug it into an AC outlet and check the power LED to confirm if you are
connected properly.
2. Identify the Ethernet port, which is located next to the power connector on the
Actiontec Wireless Access Point.
3. Attach the Ethernet cable to the Actiontec Wireless Access Point and connect the
cable on the other end to either a hub in the network or a computer. Please see
the note below for proper connection.
Figure 7: Actiontec Wireless Access Point connectors
If the Actiontec Wireless Access Point is connected to an Ethernet switch or
hub, a “normal” (not a cross-wired) Ethernet cable must be used.
If the Actiontec Wireless Access Point is connected directly to a computer, a
“cross-wired” (not a normal) Ethernet cable must be used.
Connecting to a switched Ethernet port is recommended so that the full 11
Mbps bandwidth of the Access Point is dedicated.
Andere Handbücher für 11 Mbps Wireless Access Point
4
Inhaltsverzeichnis
Andere ActionTec Drahtloser Zugangspunkt Handbücher
ActionTec
ActionTec MyWirelessTV 2 Bedienungsanleitung
ActionTec
ActionTec V2000H Bedienungsanleitung
ActionTec
ActionTec 11 Mbps Wireless Access Point Bedienungsanleitung
ActionTec
ActionTec GT701AP Bedienungsanleitung
ActionTec
ActionTec AU802C Bedienungsanleitung
ActionTec
ActionTec USB Driver R3010UW(AP) Bedienungsanleitung
ActionTec
ActionTec 802AA Bedienungsanleitung
ActionTec
ActionTec 802.11b Wireless Access Point Bedienungsanleitung
Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung
Ubiquiti
Ubiquiti NanoStation NSM2 Bedienungsanleitung
Cisco
Cisco Aironet 1550 Series Bedienungsanleitung
Aruba
Aruba IAP-335 Bedienungsanleitung
Advantek Networks
Advantek Networks AWN-AP-54MR Bedienungsanleitung
IP-COM
IP-COM AP355 Bedienungsanleitung
Buffalo
Buffalo AirStation WLA-L11G Bedienungsanleitung
EnGenius
EnGenius EnStationACv2 Bedienungsanleitung
D-Link
D-Link DAP-3662 Bedienungsanleitung
xG Technology
xG Technology xMax CN1300 Bedienungsanleitung
Widelink
Widelink ezWave WAP-1100 Series Bedienungsanleitung
Edimax
Edimax CAP1200 Bedienungsanleitung
