Cisco Aironet 1550 Series Bedienungsanleitung

GETTING STARTED GUIDE

Cisco Aironet 1550 Series Outdoor Mesh Access Points

INCLUDING LICENSE AND WARRANTY

Revised February 20, 2013

P/N: 78-19963-02

1About this Guide

2Introduction to the Access Point

3Unpacking the Access Point

4Configurations

5Becoming Familiar With the Access Point

6Network Deployment Examples

7Preparing the Access Point

8Deploying the Access Point

9Declarations of Conformity and Regulatory Information

10 In Case of Difficulty

11 Cisco 90-Day Limited Hardware Warranty Terms

1 About this Guide

This guide is designed to familiarize yourself with your Cisco Aironet 1550 Series Outdoor Mesh

Access Point and prepare it for use in your wireless network. Due to the complexity and number of

product options available, this guide does not provide detailed mounting and configuration

instructions. Those instructions can be found in the following documents:

•Cisco Mesh Networking Solution Deployment Guide

•Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

•Cisco Aironet 1520 Series Access Point Power Injector Installation Instructions

Detailed configuration information can also be found in the Cisco wireless LAN controller

documentation for the controller and software release you are using. These and other documents, such

as the Cisco Aironet 1550 Data Sheet, are available on Cisco.com. Follow these steps to access these

documents:

Step 1 Browse to http://www.cisco.com.

Step 2 Click Support. A pop-up window appears.

Step 3 Click Wireless under Select a Product Name. The Select Your Product or Technology page

appears.

Step 4 Click Wireless > Outdoor Wireless.

Step 5 Click Cisco Aironet 1550 Series in the Search for a Specific Product field. The Cisco Aironet

1550 Series Introduction page appears.

Step 6 Choose the appropriate link for the documentation you want to view or download.

FCC Safety Compliance Statement

The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio

frequency (RF) electromagnetic energy emitted by FCC certified equipment. When used with approved

Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in

OET-65 and ANSI C95.1, 1991. Proper installation of this radio according to the instructions found

in this manual will result in user exposure that is substantially below the FCC recommended limits.

Declaration of Conformity for RF Exposure

This access point product has been found to be compliant to the requirements set forth in CFR 47

Section 1.1307 addressing RF Exposure from radio frequency devices as defined in Evaluating

Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.

Use is permitted with antenna gain not exceeding 8 dBi in both the 2.4 GHz and 5 GHz band, as

described in filing, with a minimum separation distance of 20 cm (8") between the antenna and all

persons during normal operation.

Use is permitted with antenna gain not exceeding 13 dBi in the 2.4 GHz and 14 dBi in the 5 GHz band,

as described in filing, with a minimum separation distance of 50 cm (20") between the antenna and

all persons during normal operation.

Only antennas provided by Cisco for use with the product should be installed. The use of any other

antennas may cause damage to the access points or violate regulatory emission limits and will not be

supported by Cisco.

Declaration of Conformity with Regard to the EU Directive 1999/5/EC

(R&TTE Directive)

This declaration is only valid for configurations (combinations of software, firmware and hardware)

provided and/or supported by Cisco Systems. The use software or firmware not supported/provided

by Cisco Systems may result that the equipment is no longer compliant with the regulatory

requirements.

General Safety Guidelines

Warnings

Safety warnings appear throughout this guide in procedures that may harm you if performed

incorrectly. A warning symbol precedes each warning statement. The warnings below are general

warnings that are applicable to the entire guide. Specific warnings are included in the sections to which

they apply.

Translated versions of the safety warnings in this guide are provided in the Safety Warnings for

Cisco Aironet 1550 Series Outdoor Mesh Access Points document that accompanies this guide.

The translated warnings are also in Appendix A of the Cisco Aironet 1550 Series Outdoor Mesh

Access Point Hardware Installation Guide, which is available at cisco.com.

Warning

This warning symbol means danger. You are in a situation that could cause bodily injury.

Before you work on any equipment, be aware of the hazards involved with electrical

circuitry and be familiar with standard practices for preventing accidents. Use the

statement number provided at the end of each warning to locate its translation in the

translated safety warnings that accompanied this device.

Statement 1071

SAVE THESE INSTRUCTIONS

Warning

There is the danger of explosion if the battery is replaced incorrectly. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Dispose of

used batteries according to the manufacturer’s instructions.

Statement 1015

Warning

Do not operate the unit near unshielded blasting caps or in an explosive environment

unless the device has been modified to be especially qualified for such use.

Statement 364

Warning

This equipment must be externally grounded using a customer-supplied ground wire

before power is applied. Contact the appropriate electrical inspection authority or an

electrician if you are uncertain that suitable grounding is available.

Statement 366

Warning

Read the installation instructions before connecting the system to the power source.

Statement 1004

Warning

Only trained and qualified personnel should be allowed to install, replace, or service

this equipment.

Statement 1030

Warning

Ultimate disposal of this product should be handled according to all national laws and

regulations.

Statement 1040

2 Introduction to the Access Point

The Cisco Aironet 1550 Series Outdoor Mesh Access Point (hereafter called the access point or AP) is

a ruggedized outdoor access point designed for service in mesh networks. The 1550 series leverages

802.11n technology with integrated radio and internal/external antennas. The 1550 outdoor platform

consists of Multiple Input Multiple Output (MIMO) WLAN radios and integrated spectrum

intelligence (Clean Air).

CleanAir provides full 802.11n data rates while detecting, locating, classifying and mitigating radio

frequency (RF) interference to provide the best client experience possible. CleanAir technology on the

outdoor 11n platform mitigates WiFi and non-WiFi interference on both 2.4 GHz and 5 GHz radios.

The 1550 AP series contains a 2.4 GHz and 5 GHz radio with an option to configure in centralized,

Flexconnect, or mesh mode. The 2.4 GHz radios are used primarily for local access, and the 5 GHz

radios can be configured for both local access and/or wireless backhaul in the Mesh mode.

The 1550 series supports the modularity of the 1520 series and allows flexibility in radio

configuration. In addition to full interoperability with 802.11n clients, the 1550 series interoperates

with legacy clients and offers enhanced backhaul performance. The 1552C access point is configured

with an integrated DOCSIS 3.0 cable modem.

The access point is a standalone unit that can be cable strand or tower mounted. The access point can

also operate as a relay node for other access points not directly connected to a wired network.

Intelligent wireless routing is provided by the Adaptive Wireless Path Protocol (AWPP). This enables

each access point to identify its neighbors and intelligently choose the optimal path to the wired

network by calculating the cost of each path in terms of signal strength and the number of hops

required to get to a controller. The access point is configured, monitored, and operated through a Cisco

wireless LAN controller (WLC), referred to as a controller in this document. The WLC is described in

the appropriate Cisco Wireless LAN Controller Configuration Guide. The Cisco Mesh Networking

Solution Deployment Guide describes how to plan and initially configure the Cisco mesh network,

which supports wireless point-to-multipoint mesh deployments. The controllers use a browser-based

management system, a command-line interface (CLI), or the Cisco Wireless Control System (WCS)

network management system to manage the controller and the associated access points. The access

point is compliant with Wi-Fi Protected Access 2 (WPA2) and employs hardware-based Advanced

Encryption Standard (AES) encryption between wireless nodes to provide end-to-end security.

3 Unpacking the Access Point

Follow these steps to unpack the access point:

Step 1 Open the shipping container and carefully remove the contents.

Step 2 Return all packing materials to the shipping container and save it.

Step 3 Ensure that all items listed in the “Package Contents” section on page 6 are included in the

shipment. Check each item for damage. If any item is damaged or missing, notify your

authorized Cisco sales representative.

Package Contents

Each access point package contains the following items:

•One 1550 series access point

•Three liquid-tight adapters

•Two-pin DC power connector

•Ground lug (Panduit PLCD6-10A-L) and screws with lock washers

•Watertight cable glands for Power-over-Ethernet (PoE) ports (depending on the 1552 access point

model, 2 or 3 cable glands are provided)

•Cisco product documentation and translated safety warnings

Optional Equipment

Depending on what you ordered, the following optional equipment may be part of your shipment:

•External antennas, depending on which ones you purchased

•Strand mount kit (AIR-ACCSMK1550=)

•Pole mount kit (AIR-ACCPMK1550=)

•Band installation tool for pole mount kit (AIR-BAND-INS-TL=)

•AC power cord, 40 ft. (12.2 m) with North American plug (AIR-CORD-R3P-40NA=)

•AC power cord, 40 ft (12.2 m) with European unterminated end (AIR-CORD-R3P-40UE=)

•Street light power tap (AIR-PWR-ST-LT-R3P=)

•Power injector (AIR-PWRINJ1500-2=)

•1000BASELX single-mode Rugged SFP (GLC-LX-SM-RGD=)

•1000BASESX multimode Rugged SFP (GLC-SX-MM-RGD=)

•EPON ONU Rugged SFP module

•Battery, 6 amp hour (AIR-1520-BATT-6AH=)

•FIPS kit (AIRLAP-FIPSKIT=)

•Optional directional-antenna mounting kit (AIR-ACCAMK-1)

•Third-party lightning arrestors as required by local authorities

Supported Antennas

Dual Band Antennas

•Internal (2/4 dBi)

•AIR-ANT2547V-N (4/7 dBi)

•AIR-ANT2588P3M-N= (8/8 dBi)

Mono Band Antennas (used on AIR-CAP1552EU/CU APs)

2.4 GHz

•AIR-ANT2420V-N (2 dBi)

•AIR-ANT2450V-N (5 dBi)

•AIR-ANT2480V-N (8 dBi)

•AIR-ANT2413P2M-N= (13 dBi, dual polarized patch)

5 GHz

•AIR-ANT5140V-N (4 dBi)

•AIR-ANT5175V-N (7.5 dBi)

•AIR-ANT5180V-N (8 dBi)

•AIR-ANT5114P-N= (14 dBi, patch)

•AIR-ANT5114P2M-N= (14 dBi, dual polarized patch)

4 Configurations

There are two radio configurations for the 1552 AP radio, the 2 GHz MIMO radio and the 5 GHz

MIMO radio. The 2GHz MIMO radio operates in 2.4 GHz ISM band. It supports channels 1-11 in

US, 1-13 in Europe, and 1-13 in Japan.The 5GHz MIMO radio operates in the UNII-2 band (5.25 –

5.35 GHz), the UNII-2 Extended/ETSI band (5.47 – 5.725 GHz), and the upper ISM band (5.725 –

5.850 GHz).

The configurations for the two 1552 radios are:

•AIR-CAP1552E-x-K9 2.4GHz b/g/n, 5GHz a/n MIMO, Outdoor Mesh AP with external antennas

•AIR-CAP1552H-x-K9 2.4GHz b/g/n, 5GHz a/n MIMO, Outdoor Mesh AP for hazardous

locations

•AIR-CAP1552C-x-K9 2.4GHz b/g/n, 5GHz a/n MIMO, Outdoor Mesh AP with integrated

antennas and DOCSIS 3.0 and Euro DOCSIS 3.0 Cable Modem

•AIR-CAP1552I-x-K9 2.4GHz b/g/n, 5GHz a/g/n MIMO, Outdoor Mesh AP with integrated

antennas

•AIR-CAP1552EU-x-K9 Band Separated Outdoor Mesh AP with External Antennas

•AIR-CAP1552CU-x-K9 Band Separated Outdoor Mesh Cable AP with External Antenna and

DOCSIS 3.0 and EURO DOCSIS 3.0 Cable Modem

For information on the regulatory domains (shown above as “x”) see “Regulatory Domains” section

on page 9.

Regulatory Domains

The 1550 series supports the following regulatory domains (shown as “x” in the model numbers):

•-A FCC/North America, including Canada, Mexico, and some South American countries

•-C China, Indonesia, Malaysia, Egypt

•-E ETSI and many European, Middle Eastern, and African countries (EMEA)

•-K Korea

•-M Kuwait and Saudi Arabia

•-N Non-FCC, including Australia, New Zealand, Hong Kong, India, Brazil, Panama, and

Mexico

•-Q Japan (5.47-5.725GHz channels)

•-R Russia

•-S Singapore

•-T Taiwan

For the latest details and accurate listing of country homologation, refer to “Table 3. 802.11abgn

Mesh Access Points” on the Wireless-LAN-Compliance-Status page at:

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80

537b6a.html#wp9005628

5 Becoming Familiar With the Access Point

The following illustrations show identify the access point connections. Before you begin the

installation process, use these illustrations to familiarize yourself with the access point.

Note The illustrations show all available connections for the configuration ordered. Unused

connections are capped to ensure the watertight integrity of the access point. Liquid tight

connectors are provided for all ports, which can be installed prior to or after deploying the

access point.

Figure 1 and Figure 3 shows the access point bottom and side connectors for models

AIR-CAP1552E-x-K9, AIR-CAP1552EU-x-K9, and AIR-CAP1552H-x-K9. Figure 2 and Figure 6

show the access point top connectors for AIR-CAP1552EU-x-K9 and AIR-CAP1552CU-x-K9.

Figure 4 and Figure 5 show the access point bottom and side connectors for models

AIR-CAP1552I-x-K9, AIR-CAP1552C-x-K9, and AIR-CAP1552CU-x-K9. Figure 7 shows the RF

splitter components for models AIR-CAP1552C-x-K9 and AIR-CAP1552CU-x-K9. Figure 8 shows the

access point right side connectors for all models.

Figure 1 Access Point Bottom Connectors - Models AIR-CAP1552E-x-K9, AIR-CAP1552EU-x-K9, and

AIR-CAP1552H-x-K9

Note Antenna ports 1, 2 and 3 are not shown in Figure 1. These ports are reserved for future use

and will be located on the top of the access point.

1Antenna port 4 6Fiber port

2Antenna port 5 7PoE-out port

3Antenna port 6 8LEDs (Status, Up Link, RF1, RF2)

4AC power connector for model

AIR-CAP1552H-x-K9 only

9PoE-in port

5AC power connector for model

AIR-CAP1552E/EU-x-K9 only

45 6

282137

1 2 3

789

Andere Handbücher für Aironet 1550 Series

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco Meraki Go GR12 Bedienungsanleitung

Cisco

Cisco AIR-AP1020 - 1000 Series Lightweight Access... Bedienungsanleitung

Cisco

Cisco 1830 Series Bedienungsanleitung

Cisco

Cisco WAP150 Bedienungsanleitung

Cisco

Cisco AIR-LAP1142N-A-K9 Bedienungsanleitung

Cisco

Cisco Meraki MR56 Bedienungsanleitung

Cisco

Cisco Aironet Wave 2 Installationshandbuch

Cisco

Cisco Meraki MR76 Bedienungsanleitung

Cisco

Cisco Small Business WAP551 Bedienungsanleitung

Cisco

Cisco Meraki MR36H Bedienungsanleitung

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco aironet 1522 Leitfaden

Cisco

Cisco 7200 VXR Series Bedienungsanleitung

Cisco

Cisco Aironet 1815i Bedienungsanleitung

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Bedienungsanleitung

Cisco

Cisco Small Business AP541N Bedienungsanleitung

Cisco

Cisco 700 series Bedienungsanleitung

Cisco

Cisco WAP361 Bedienungsanleitung

Cisco

Cisco Aironet 1250 Series Bedienungsanleitung

Cisco

Cisco Aironet 1530 Series Handbuch

Cisco

Cisco Linksys WAP54G LA Bedienungsanleitung

Cisco

Cisco WAP150 Bedienungsanleitung

Cisco

Cisco MR74 Handbuch

Cisco

Cisco WAP4410N - Small Business Wireless-N Access... Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung