ActionTec R3000 Bedienungsanleitung
User Guidev1
Wireless Router
Model # R3000
i
Table of Contents
Introduction 1
Minimum System Requirements 1
Features 1
Getting to Know the R3000 3
Performing a Quick Setup 7
Accessing Quick Setup Screens 7
Changing the Password 11
Configuring Wireless Settings 12
Accessing Wireless Settings 12
Basic Settings 14
Advanced Settings 15
WPS 17
Wireless MAC Authentication 19
Wireless Schedule 20
Wireless Auto Configuration 21
Configuring Firewall Settings 22
Accessing Firewall Settings 22
Firewall 24
Port Forwarding 25
Applications 26
DMZ Hosting 27
UPnP 28
ConfiguringAdvanced Setup 29
Accessing Advanced Setup Options 29
Services Blocking 32
Website Blocking 33
Scheduling Access 34
LAN IP and DHCP Settings 36
WAN VLAN 38
QoS Settings 40
Remote GUI 42
Remote Telnet 43
Dynamic Routing 44
Static Routing 45
Admin Password 46
Port Forwarding 47
i
ii
Table of Contents
ii
Applications 48
DMZ Hosting 50
Firewall 51
NAT 52
UPnP 52
Viewing the R3000’s Status 56
Accessing Wireless Settings 56
Connection Status 58
WAN Status 59
WAN Ethernet Status 60
Routing Table 61
Firewall Status 61
NAT Table 62
Wireless Status 62
Modem Utilization 63
LAN Status 64
Specifications 65
General 65
Wireless Operating Range 66
LED Indicators 66
Environmental 66
Notices 67
Regulatory Compliance Notices 67
Modifications 67
GPL (General Public License) 68
1
Introduction
Thank you for choosing the R3000. With its powerful wireless N radio, gigabit
Ethernet switch, and WAN port, as well as its dual-core processor and support for
HPNA, the R3000 will propel you to new speeds as you traverse the Internet. We
are sure the R3000 will provide you with years of hassle-free performance.
Minimum System Requirements
• Computer with an 10 Mbps or 10/100/1000 Mbps Ethernet connection
• Microsoft Windows 2000, XP, Vista; Mac OS 7.1+, 8.0+, 9.0+, OS X+
• Internet Explorer (7.0 or higher), Firefox, Safari web browsers
• TCP/IP network protocol installed on each computer
Features
• Gigabit Ethernet (WAN and LAN)
• Optional Java Virtual Machine and Java Runtime software
• TR-069 support with remote management
• TR-064 local management
• 64-, 128-, and 256-bit WEP/WPA/WPA2 wireless LAN security
• IEEE 802.3 Ethernet standard compliance
• Four 10/100/1000 Base-T Ethernet ports (LAN)
1
2
R3000 Wireless Router
• One 10/100/1000 Base-T Ethernet ports (WAN)
• DHCP server option
• MAC address cloning
• QoS support, including diffserv and random early detection
• PPPoE support
• External Radius support
• Web-based configuration support
• FTP firmware upgradeable
• Web download support
• 802.11n/ac support
• WPS support
• Advanced firewall
• ALG
3
Introduction
Getting to Know the R3000
This section contains a quick description of the R3000’s lights, ports, etc.
The R3000 has several indicator lights (LEDs) and a button on its front panel, and a
series of ports and switches on its rear panel.
Front Panel
The front panel of the R3000 features 11 LEDs: Power, WAN Ethernet, Internet,
Ethernet (4), USB, 2.4G WiFi, 5G WiFi and WPS Push Button.
4
R3000 Wireless Router
Power
The Power LED displays the R3000’s current status. If the Power LED glows
steadily green, the R3000 is receiving power and fully operational. When the
Power LED is rapidly flashing, the R3000 is initializing. If the Power LED is glows
red when the Power cord is plugged in, the R3000 has suffered a critical error
and technical support should be contacted. If the Power LED is flashing red, the
R3000 is performing a firmware update.
WAN Ethernet
When the WAN Ethernet LED glows steadily, the R3000 is connected to an
Ethernet WAN. When it flashes, it signifies that data traffic is traveling across the
connection.
Internet
When the Internet LED glows steadily, the R3000 is connected to the DSL pro-
vider. When it flashes, data traffic is passing across the R3000.
LAN Ethernet
The LAN Ethernet LEDs illuminate when the R3000 is connected to another
device via one of its LAN Ethernet ports. When one of the LAN Ethernet LEDs
flashes, data traffic is passing across the corresponding connection.
USB
The USB LED illuminates when a USB device is connected via the R3000’s USB
port. This port is not currently operational, but may be enabled in a future firm-
ware update.
Wireless
The Wireless LED illuminates when the R3000 is connected wirelessly, assuming
the R3000’s Wireless feature is turned on.
5
Introduction
WPS Button
The WPS button activates WPS (WiFi Protected Setup) on the R3000. To use
WPS, press the WPS button on the R3000, then, within two minutes, press the
WPS button on a device you wish to connect to the R3000’s wireless network.
The device will automatically join the R3000’s wireless network. Repeat for other
wireless devices.
Rear Panel
The rear panel of the R3000 features 8 ports (Line, HPNA, LAN Ethernet, WAN
Ethernet, USB, and Power), as well as a Reset switches.
Line Port
The Line port is used to connect the R3000 to a telephone line connection.
HPNA Port
The HPNA port is used to connect the R3000 to an HPNA connection via
coaxial cable.
6
R3000 Wireless Router
LAN Ethernet Ports (4)
The LAN Ethernet ports are used to connect computers to the R3000 via
Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto-sensing ports,
and either a straight-through or crossover Ethernet cable can be used when con-
necting to the ports.
WAN Ethernet Port
The WAN Ethernet port is used to connect the R3000 to a WAN via an
Ethernet cable.
USB Port
The USB port is used to connect the R3000 to a USB device. This port is not yet
active; it may be activated in a future firmware update.
Reset Switch
Depressing the Reset switch for one second will restore the R3000’s factory
default settings. To reset the R3000, depress and hold the Reset switch for
approximately ten seconds. The reset process will start after releasing the switch.
Power Port
The Power port is used to connect the Power cord to the R3000.
WARNING! Do not unplug the Power cord from the R3000 during the
reset process. Doing so may result in permanent damage to the R3000.
7
Performing a
Quick Setup
This chapter is a guide through a quick set up of the R3000, including how to con-
nect the R3000 to the ISP.
To complete the quick setup, have the Welcome Letter or ISP Worksheet handy. If
the document is not available, contact the ISP immediately.
Accessing Quick Setup Screens
To access the Quick Setup screens:
1. Open a Web browser. In the “Address” text box, type:
http://192.168.0.1
then press Enter on the keyboard.
2
Andere Handbücher für R3000
1
Inhaltsverzeichnis
Andere ActionTec WLAN-Router Handbücher
ActionTec
ActionTec PK5000 Bedienungsanleitung
ActionTec
ActionTec C3000A Bedienungsanleitung
ActionTec
ActionTec GT724WG Sicherheitsleitfaden
ActionTec
ActionTec MI424WRN Bedienungsanleitung
ActionTec
ActionTec MI424-WR Bedienungsanleitung
ActionTec
ActionTec Q1000 Bedienungsanleitung
ActionTec
ActionTec MI424-WR Bedienungsanleitung
ActionTec
ActionTec MI424-WR Bedienungsanleitung
ActionTec
ActionTec V1000H Bedienungsanleitung
ActionTec
ActionTec R3000 Bedienungsanleitung
ActionTec
ActionTec Broadband Router MI408 Bedienungsanleitung
ActionTec
ActionTec Broadband Router RI408 Bedienungsanleitung
ActionTec
ActionTec GT701WRU Bedienungsanleitung
ActionTec
ActionTec V1000H Bedienungsanleitung
ActionTec
ActionTec MI424-WR Bedienungsanleitung
ActionTec
ActionTec Broadband Router RI408 Bedienungsanleitung
