ACTiSYS ACT-IR2002UL Bedienungsanleitung
921 Corporate Way, Fremont, CA94539, USA
Tel: +1-510-490-8024, Fax: +1-510-623-7268
Web: http://www.actisys.com, E-mail: [email protected]
ACT-IR2002UL/ACT-IR4002US
IrReadyTM FIR USB Adapter
User’s Manual
ACT-IR2002UL
ACT-IR4002US
April 7, 2014
Version. 1.0.6
©Copyright 2002-2014 ACTiSYS Corporation,
All Rights Reserved
Warning! Please Install Driver BEFORE you
plug in the Dongle to USB port, for MAC & all
Windows OS unless your PC is Windows 7 or
8 which is plug and play already.
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 2 of 30 Apr. 7, 2014
V.1.0.6
FEDERAL COMMUNICATIONS COMMISSION
DECLARATION OF CONFORMITY
FOR THE FOLLOWING EQUIPMENT:
PRODUCT NAME: _IrReady™ USB ADAPTER
MODEL NO.: ACT-IR2002UL/ACT-IR4002US
IS HEREWITH CONFIRMED AND FOUND TO COMPLY WITH THE REQUIREMENTS OF CFR 47
PART 15 REGULATION.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND,
THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
NOTE: Must be used with shielded cable only.
FOR YOU RECORDS
For your assistance in reporting this product in case of loss or theft, please record below the model
number and serial, which are located on the bottom of the case. Please retain this information.
Model Number Serial Number
Date of Purchase Place of Purchase
All indicated copyrights and trademarks in the following pages are the properties of their respective
owners.
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 3 of 30 Apr. 7, 2014
V.1.0.6
TABLE OF CONTENTS
REVISION HISTORY........................................................................................................................................................... 4
1INTRODUCTION....................................................................................................................................................... 6
2PACKAGING CHECK LIST .................................................................................................................................... 6
3SYSTEM REQUIREMENTS..................................................................................................................................... 6
4BIOS SETUP ............................................................................................................................................................... 6
5DRIVER INSTALLATION FOR WINDOWS XP/2000/ME/98SE........................................................................ 7
6DRIVER INSTALLATION FOR WINDOWS 8/7/VISTA (32 & 64 BIT)............................................................. 8
7DRIVER INSTALLATION FOR MAC OS INTEL BASED PC.......................................................................... 10
8CHECK DRIVER INSTALLATION IN WINDOWS 8/7/VISTA/XP/2000/ME................................................. 13
9CHECK DRIVER INSTALLATION IN MAC OS................................................................................................ 14
10 DRIVER UN-INSTALLATION FOR WINDOWS XP ......................................................................................... 14
11 DRIVER UN-INSTALLATION FOR WINDOWS 8/7/VISTA (32 & 64 BIT).................................................... 16
12 DRIVER UN-INSTALLATION IN MAC OS ........................................................................................................ 17
13 MANUALLY UPDATE THE DRIVER IN WINDOWS XP/ VISTA /7 / 8 ......................................................... 18
14 IRCOMM2K DRIVER AND THE VIRTUAL COM PORT................................................................................ 22
15 TROUBLE SHOOTING........................................................................................................................................... 25
16 SPECIFICATION..................................................................................................................................................... 26
17 PRECAUTIONS........................................................................................................................................................ 28
18 WARRANTY INFORMATION .............................................................................................................................. 29
19 CONTACT INFORMATION .................................................................................................................................. 30
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 4 of 30 Apr. 7, 2014
V.1.0.6
REVISION HISTORY
Revision History
Revision Date Comment
1.0.0 6/26/2009 Initial released
1.0.1 6/25/2010 Windows 7 update and Added chapter for guide to update the driver
manually in Windows XP / Vista / Windows 7
1.0.2 7/02/2010 Combined ACT-IR2002UL and ACT-IR4002US User’s Manual
1.0.3 7/30/2010 Updated Driver and installation procedure for Windows O.S
1.0.3.1 8/4/2010 Added chapter of IrCOMM2K driver & Virtual COM port
1.0.4 5/12/2011 Updated to single click & silent installer driver for Win XP/Vista/Win7
32 & 64 bit OSes
1.0.5 3/5/2014 Updated Windows Support which includes Win 8
1.0.5.1 3/21/2014 Added IR4002US in the 1st paragraph of chapter 8 Check Driver
1.0.6 4/7/2014 Updated screen shot in Installation step, & Add or Remove
Programs. Updated FCC declaration chapter.
ACTiSYS reserves the right to make changes without further notice to any products herein to improve reliability,
function or design. ACTiSYS does not assume any liability arising out of the application or use of any product or
circuit described herein.
All trademarks, logos, organizations or company names and product model names are the properties of the
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 5 of 30 Apr. 7, 2014
V.1.0.6
respective owners.
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 6 of 30 Apr. 7, 2014
V.1.0.6
1 INTRODUCTION
ACT-IR2002UL & ACT-IR4002US are advanced Infrared USB adapters to replace the serial port
peripheral through USB port.
ACT-IR4002US is the thumb size version of ACT-IR2002UL. The latter has build in USB cable while the
former, like a flash disk, has only build in USB connector so that it becomes more compact to be carried.
They are also the next generation of ACT-IR2000UL/ ACT-IR4000US respectively. You will find no any
functional difference between them except the new generation has new driver and more flexible to use.
Features :
Supports all Windows from Win98 up to Win8 (32 & 64 bit), Win CE 4.2 & 5.0 (USB host), Mac 10.x
(both Intel & Power PC based) and Linux.
WHQL certified.
Fully compliant to USB specification 1.1 and IrDA®specification 1.4
Full-speed (12 Mbps) USB device operation
Supports FIR (4Mbps), MIR (1.152 Mbps) and all SIR speeds (9.6, 19.2, 38.4, 57.6 and 115.2 kbps).
Bus-powered device. Obtain power from USB port. No external power supply required.
Low power consumption in standby mode (Standby current 20 mA).
Not occupy PC's COM or Parallel port and has no complicated hardware port and resource setting
and conflict, such as IO address / IRQ / DMAnumbers.
2 PACKAGING CHECK LIST
The package includes:
A) ACT-IR2002UL B) ACT-IR4002US
1. ACT-IR2002UL USB Dongle with built in USB
cable.
2. Installation CD for Driver and User’s manual.
1. ACT-IR4002US USB Dongle
2. USB Cable
3. Installation CD for Driver and User’s manual.
3 SYSTEM REQUIREMENTS
1. Windows 98SE/ME/2000/XP/Vista/Windows 7/8, Win CE 4.2 & 5.0 (USB host), Mac 10.x (both Intel
& Power PC based) and Linux
2. One unoccupied USB port.
4 BIOS SETUP
Before you use this device, you MUST enable your computer USB port in BIOS Settings.
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 7 of 30 Apr. 7, 2014
V.1.0.6
5 DRIVER INSTALLATION FOR WINDOWS XP/2000/ME/98SE
1. Insert the driver CD, It
will automatically
initialize the driver
installation wizard as
shown. Or manually
browse CD to double
click “setup.exe” for this
installation.
2.The Installer will install
ACT-IR2002UL /
ACT-IR4002US driver
without any user action.
The installer will exit
without any prompts after
successful installation
3.Now plug the
ACT-IR2002UL. /
ACT-IR4002US dongle It
will pop up a Bubble
Window : “Found New
Hardware” as shown in the
figure. Then this bubble
window will show
“USB-Infrared Adapter”
after completing this
procedure.
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 8 of 30 Apr. 7, 2014
V.1.0.6
6 DRIVER INSTALLATION FOR WINDOWS 8/7/VISTA (32 & 64 BIT)
Note: Windows 8/7/Vista actually has its Native drivers for you. You can just Plug and Play and
Windows will auto find it.So you can skip this chapter. Yet, you can still follow below procedure just in
case you fail to find the proper native driver.
1. Insert the driver CD, It
will automatically
initialize the driver
installation wizard as
shown
2. The Installer will install
the driver. After this step
completes, you will see
“Completed” window.
3. Please click Finish to
close it.
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 9 of 30 Apr. 7, 2014
V.1.0.6
4. Now plug the dongle
ACT-IR2002UL./
ACT-IR4002US It will
pop up a Bubble
Window : “Installing
device driver software”,
which will display as
“USB-Infrared Adapter”
after installed
successfully as right
figure.
The Infrared Wireless Expert
ACT-IR2002UL/ACT-IR4002US
User’s Manual
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information Page 10 of 30 Apr. 7, 2014
V.1.0.6
7 DRIVER INSTALLATION FOR MAC OS INTEL BASED PC
IMPORTANT: Please install driver BEFORE you plug in ACT-IR2002UL / ACT-IR4002US
to USB port.
1. Insert the CD, Double
click the package file
MCS7780DriverDisk.
pkg for installing the
driver or go to
Applications and
double click the
installer and browse
for the
MCS7780DriverDisk.p
kg
2. An installer wizard will
popup. Click Continue to
start the installation.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere ACTiSYS Adapter Handbücher
ACTiSYS
ACTiSYS RS232 Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IR100MU Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IR204UN Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IR100SD OBEX Server Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IR320L Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IR100SD OBEX Server Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IR100M+ Bedienungsanleitung
ACTiSYS
ACTiSYS IR4020U Bedienungsanleitung
ACTiSYS
ACTiSYS BT5900US Bedienungsanleitung
ACTiSYS
ACTiSYS IR200L Bedienungsanleitung
ACTiSYS
ACTiSYS IR100M Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IR8250SW Bedienungsanleitung
ACTiSYS
ACTiSYS IR303FM Handbuch
ACTiSYS
ACTiSYS ACT-IR220L Bedienungsanleitung
ACTiSYS
ACTiSYS IrDA PC Adapter ACT-IR220L+/220L/200L Bedienungsanleitung
ACTiSYS
ACTiSYS IR2000UL Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-100M Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IR200L Bedienungsanleitung
ACTiSYS
ACTiSYS BT5100US Bedienungsanleitung
ACTiSYS
ACTiSYS ACT-IRx24UN-Lx Bedienungsanleitung
