ACU-RITE 2023 Bedienungsanleitung

SAVE THIS MANUAL FOR FUTURE REFERENCE.

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets................. 3

Setup .................................... 4

Set the Time & Units ............... 6

Backlight Settings................... 6

Placement Guidelines ............. 7

Using the Thermometer........... 8

Troubleshooting ..................... 9

Care & Maintenance.............10

Specications........................10

FCC Information ...................10

Customer Support ................. 11

Warranty..............................11

Instruction Manual

Thermometer

models 02023/02028

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com

Congratulations on your new AcuRite product. To ensure the best

possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this

product. Locate the tab and peel off to remove.

Package Contents

1. Display unit

2. Outdoor sensor

3. Power adapter

4. Instruction Manual

PRODUCT REGISTRATION

to receive 1 year

warranty protection

www.AcuRite.com

IMPORTANT PRODUCT MUST BE REGISTERED

TO RECEIVE WARRANTY SERVICE

►

AUTO

Features & Benets

DISPLAY UNIT

1. Freeze Alert Indicator

Indicates temperature is below

freezing (33ºF; 0ºC).

2. Current Outdoor Temperature

Arrow icon indicates the direction

the temperature is trending.

3. AUTO DIM Mode Indicator

See page 6.

4. Current Indoor Temperature

Arrow icon indicates the direction

the temperature is trending.

5. “ “ Button

For setup preferences and press to

view low records.

6. “ “ Button

For setup preferences.

12 10

5 6 7

7. “ “ Button

For setup preferences and press to

view high records.

8. Display Low Battery Indicator

9. Clock

10. Outdoor Sensor Signal Strength

11. Backlight Button

12. Outdoor Sensor Low Battery Indicator

OUTDOOR SENSOR

13. Integrated Hanger

for easy placement.

14. Wireless Signal Indicator

Flashes when data is being sent to

the display unit.

15. Battery Compartment Cover

9 811

SETUP

Install or Replace Batteries

AcuRite recommends high quality

alkaline or lithium batteries in

the outdoor sensor for the best

product performance. Heavy duty

or rechargeable batteries are not

recommended.

The sensor requires lithium batteries

in low temperature conditions. Cold

temperatures can cause alkaline

batteries to function improperly. Use

lithium batteries in the sensor for

temperatures below -4ºF / -20ºC.

1. Slide off the battery compartment

cover.

2. Insert 2 x AA batteries into the

battery compartment, as shown.

Follow the polarity (+/-) diagram

in the battery compartment.

3. Replace the battery cover.

Sensor Setup

Install Batteries

2 AA batteries

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used

batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ﬁre,

as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge

non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Display Unit Setup

Install or Replace Backup

Batteries (optional)

AcuRite recommends high

quality alkaline batteries in the

display unit for the best product

performance. Heavy duty or

rechargeable batteries are not

recommended.

1. Remove the battery

compartment cover.

2. Insert 3 x AA alkaline batteries

into the battery compartment,

as shown. Follow the polarity

(+/–) diagram in the battery

compartment.

3. Replace the battery cover.

Plug in Power Adapter

For the best performance, plug

in the power adapter as the main

power source for this product.

1Install Backup Batteries

(optional)

3 AA batteries

IMPORTANT: Batteries are

a backup power source to

preserve records in the event of

a power outage. Power adapter

is recommended as the primary

power source to enjoy the full

functionality of this product.

2Plug in Power Adapter

Set the Time & Units

Press the “ ” button, located on the back of the display unit, to enter SET

MODE. Once in set mode, the preference you are currently setting will blink on

the display.

To adjust the currently selected (ashing) item, press and release the “ “ or

“ ” buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “ ” button again to adjust

the next preference. The preference set order is as follows:

CLOCK HOUR

CLOCK MINUTE

TEMPERATURE UNITS (ºF or ºC)

You will automatically exit SET MODE if no buttons are pressed for 10 seconds.

Enter setup mode at any time by pressing the “ ” button.

Display Backlight Settings

This weather station’s color display features three different lighting settings:

High (100%) brightness, Medium (60%) brightness and Low (30%) brightness

Using battery power alone, the backlight is available momentarily for 10

seconds by pressing the “BACKLIGHT” button.

When display is powered with the power adapter, backlight remains on at

100% brightness. Press “BACKLIGHT” button once to dim to 60% brightness;

press again to dim to 30%, press a 3rd time to enter “AUTO DIM” mode.

“ “ will appear to the left of the time.

AUTO DIM MODE: Automatically adjusts display brightness based on time of day

6:00 a.m. - 8:00 p.m. 100% brightness

8:01 p.m. - 5:59 a.m. 30% brightness

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper

placement of both the display unit and outdoor sensor are critical to the

accuracy and performance of this product.

Display Unit Placement

Place the display unit in a dry area free of dirt and dust. Display

unit stands upright for tabletop use.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions.

Sensor is water resistant and is designed for general outdoor

use, however, to extend its life place the sensor in an area

protected from direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or

by using string (not included) to hang it from a suitable location,

like a well covered tree branch. The best location is 4 to 8 feet

above the ground with permanent shade and plenty of fresh air

to circulate around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct

sunlight and away from heat sources or vents.

• Display unit and outdoor sensor must be within 165 ft (50 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick

walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (.9 m) away

from electronic devices (TV, computer, microwave, radio, etc.)

Setup is Complete

The sensor will now synchronize with the display unit. It may take a few

minutes for synchronization to complete. Please refer to the troubleshooting

section of this manual if anything appears to be functioning improperly.

(50 meters)

(165 feet maximum)

AUTO

Using the Thermometer

High/Low Records

Today’s high and low values are recorded for indoor and outdoor

temperature. The high and low records automatically clear at 12:00am.

To view the LOW temperature record, press and release the “ ” button. The

“LOW” icon appears on the display next to the low records. To view the HIGH

temperature record, press and release the “ “ button. The “HIGH” icon

appears on the display next to the high records.

To reset the LOW records, press AND HOLD the “ ” button while viewing

the low records. Dashes will display to conrm all low values have been

cleared.

To reset the HIGH records, press AND HOLD the “ “ button while viewing

the high records. Dashes will display to conrm all high values have been

cleared.

OPERATION

Troubleshooting

No outdoor sensor

reception

no bars

If the wireless signal indicator shows no bars:

• Relocate the display unit and/or the outdoor sensor.

The units must be within 165 ft (50 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m)

away from electronics that may interfere with the

wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries (or lithium batteries in

sensor when temperature is below -4ºF/-20ºC). Do not

use heavy duty or rechargeable batteries. NOTE: It

may take up to 20 minutes for display unit and sensor

to synchronize after batteries are replaced.

Outdoor

temperature

is ashing or

showing dashes

Flashing of the outdoor temperature is generally an

indication of wireless interference.

1. Bring both the sensor and display unit indoors and

remove at least one battery from each.

2. Reinstall the battery in the outdoor sensor.

3. Reinstall the battery in the display unit.

4. Let the units sit within a couple feet of each other

for about 20 minutes to gain a strong connection.

Inaccurate

temperature

• Make sure both the display unit and sensor are

placed out of direct sunlight and away from any heat

sources or vents (see page 7).

Display screen

not working

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep

away from dust, dirt and moisture. Clean ventilation ports regularly with a

gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Specications

TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC

Indoor: 32ºF to 122ºF; 0ºC to 50ºC

WIRELESS RANGE 165 ft / 50 m depending on home construction materials

WIRELESS FREQUENCY 433 MHz

POWER Display: 5V AC power adapter

3 x AA alkaline batteries (optional)

Sensor: 2 x AA alkaline or lithium batteries

DATA REPORTING 30 second updates

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.

Such modications could void the user authority to operate the equipment.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACU-RITE Thermometer Handbücher

ACU-RITE

ACU-RITE 02042 Bedienungsanleitung

ACU-RITE

ACU-RITE 278 Bedienungsanleitung

ACU-RITE

ACU-RITE 02044W Bedienungsanleitung

ACU-RITE

ACU-RITE 00611 Bedienungsanleitung

ACU-RITE

ACU-RITE 02044W Bedienungsanleitung

ACU-RITE

ACU-RITE 00782W3 Bedienungsanleitung

ACU-RITE

ACU-RITE 384 Bedienungsanleitung

ACU-RITE

ACU-RITE 00411 Bedienungsanleitung

ACU-RITE

ACU-RITE 603 Bedienungsanleitung

ACU-RITE

ACU-RITE 02044W Bedienungsanleitung

ACU-RITE

ACU-RITE 01184 Bedienungsanleitung

ACU-RITE

ACU-RITE 782 Bedienungsanleitung

ACU-RITE

ACU-RITE 00891W3 Bedienungsanleitung

ACU-RITE

ACU-RITE 00986A2 Bedienungsanleitung

ACU-RITE

ACU-RITE 02067 Bedienungsanleitung

ACU-RITE

ACU-RITE 00609 Bedienungsanleitung

ACU-RITE

ACU-RITE 00529W Bedienungsanleitung

ACU-RITE

ACU-RITE 00611 Bedienungsanleitung

ACU-RITE

ACU-RITE 02029W Bedienungsanleitung

ACU-RITE

ACU-RITE 00648SB1 Bedienungsanleitung

ACU-RITE

ACU-RITE 10378 Handbuch

ACU-RITE

ACU-RITE 00754 Bedienungsanleitung

ACU-RITE

ACU-RITE 888 Bedienungsanleitung

ACU-RITE

ACU-RITE 617 Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Veridian Healthcare

Veridian Healthcare 09-349 Bedienungsanleitung