ACV Smart Line SLE 130 Montageanleitung

Smart Line SLE - SLE Plus : 661Y2100 • A

INSTALLATION, OPERATING AND

MAINTENANCE INSTRUCTIONS

SLE

130 - 160 - 210 - 240 - 300

SLE Plus

210 - 240 - 300

SMART Line

2Smart Line SLE - SLE Plus : 661Y2100 • A

TABLE OF CONTENTS

USER'S GUIDE.............................................................................................5

Control panel ............................................................................................................................................................. 5

APPLIANCE DESCRIPTION........................................................................6

TECHNICAL CHARACTERISTICS..............................................................7

Main characteristics ............................................................................................................................................. 7

Dimensions.................................................................................................................................................................. 7

Heating connections ........................................................................................................................................... 8

Domestic hot water connections.............................................................................................................. 8

Domestic hot water performances.......................................................................................................... 9

Maximum operating conditions................................................................................................................ 9

Electrical characteristics ................................................................................................................................10

INSTALLATION ........................................................................................11

Package contents ................................................................................................................................................. 11

Tools required for the installation........................................................................................................... 11

Safety instructions...............................................................................................................................................12

Connection................................................................................................................................................................14

Connection to the DHW circuit.................................................................................................................15

Connection to the primary circuit..........................................................................................................16

Examples of possible combinations of the SLE and SLE Plus...........................................17

Tank used as electric DHW tank only...................................................................................................18

Smart Line SLE - SLE Plus : 661Y2100 • A

TABLE OF CONTENTS

STARTING UP ...........................................................................................19

Safety instructions to ll the tank...........................................................................................................19

Filling ..............................................................................................................................................................................20

Checks before starting up.............................................................................................................................22

Starting up .................................................................................................................................................................22

MAINTENANCE........................................................................................23

Periodic checks by the user .........................................................................................................................23

Annual maintenance .........................................................................................................................................23

Draining........................................................................................................................................................................24

Bringing back into service after maintenance .............................................................................25

Fault nding..............................................................................................................................................................26

NOTES

• This manual contains important information with respect to the installation, the starting up

and the maintenance of the hot water tank.

• This manual must be provided to the user, who will read it carefully and keep it in a safe

place.

• The availability of certain models as well as their accessories may vary according to the markets.

• The manufacturer reserves the right to change the technical characteristics and features of

its products without prior notice.

We accept no liability should any damage result from the failure to comply with theinstruc-

tions contained in this technical manual.

Essential instructions forthe safety of persons and the environment

• It is strictly prohibited to bring any modification to the appliance, without

themanufacturer’s prior written approval.

• The appliance must be installed by a qualified installer, in accordance with

applicable regulations.

• The installation must comply with the instructions contained in this manual and

with the regulations applicable to installations.

• Failure to follow the instructions in this manual could result in personal injury or a

risk of environmental pollution.

• The manufacturer declines all liability for any damage caused as a result of

incorrect installation or in the event of the use of appliances or accessories that are

not approved by the manufacturer.

Essential instructions forthecorrect operation oftheinstallation

• In order to ensure that the appliance operates correctly, it is essential to have it

serviced by a certified installer or maintenance contractor every year.

• In case of problem, please contact your installer for advice.

• Faulty parts must only be replaced with genuine parts.

• Our domestic hot water tanks are designed and manufactured exclusively for the

heating and storage of domestic hotwater.

• The domestic hot water heaters must only be heated using hot water in a closed

circuit.

• The part number (N° Art.) and serial number (N° Ser.) of the tank are indicated on

its rating plate and must be provided to ACV in case of warranty claim. Failure to

do so will make the claim void.

4Smart Line SLE - SLE Plus : 661Y2100 • A

GENERAL RECOMMENDATIONS

Smart Line SLE - SLE Plus : 661Y2100 • A

USER'S GUIDE

CONTROL PANEL

Key :

1. Control thermostat [60/90°C] - to set the domestic hot water (DHW) temperature.

2. Manual reset high limit thermostat - to restart the tank after overheating of the primary circuit.

3. Connection plug - to connect the electrical power supply.

4. Thermometer - indicates the temperature of the DHW.

6Smart Line SLE - SLE Plus : 661Y2100 • A

APPLIANCE DESCRIPTION

MODELS  SLE / SLE Plus

High efficiency storage water tanks, to be installed on the floor. Possibility to heat by transfer fluid

or independently with an optional electric resistance.

1. Manual air bleed valve

2. Polypropylene shell

3. Dip tube

4. Electrical heating element (optional)

5. Outer steel tank (primary circuit)

6. Polypropylene top lid

7. Polyurethane foam insulation

8. Dry well

9. Stainless steel tank (DHW)

10. Polypropylene bottom lid

Smart Line SLE - SLE Plus : 661Y2100 • A

TECHNICAL CHARACTERISTICS

MAIN CHARACTERISTICS

SLE

130

SLE

160

SLE /

SLE Plus

210

SLE /

SLE Plus

240

SLE /

SLE Plus

300

Total capacity L 130 161 203 242 293

Primary circuit capacity (heating) L 55 62 77 78 93

Sanitary circuit capacity L 75 99 126 164 200

Primary uid ow rate L/h 2100 2600 3500 4200 5500

Primary pressure drop mbar 17 22 37 45 51

Tank heating surface m² 1,03 1,26 1,54 1,94 2,29

Empty weight kg 45 54 66 76 87

DIMENSIONS

SLE

130

SLE

160

SLE

210

SLE

240

SLE

300

SLE Plus

210

SLE Plus

240

SLE Plus

300

A (mm) 1025 1225 1495 1740 2045 1495 1740 2050

B (mm) 760 960 1230 1480 1780 1230 1480 1785

C (mm) 235 235 235 235 230 235 235 235

D (mm) 235 235 335 340 405 315 305 340

E (mm) — — — — — 940 1070 1280

F (mm) — — — — — 475 455 525

G (mm) — — 375 375 405 355 345 380

H (mm) — — 235 235 230 235 235 235

FGHG

360

150

565

8Smart Line SLE - SLE Plus : 661Y2100 • A

TECHNICAL CHARACTERISTICS

HEATING CONNECTIONS

DOMESTIC HOT WATER CONNECTIONS

1. Heating ow connection (tank loading)

2. Auxiliary heating return

(only SLE Plus)

3. Auxiliary heating return

(only SLE Plus)

4. Heating ow connection / heat pump

(except SLE 130 - 160)

5. Optional electrical heating element connection

6. Heating return connection / heat pump

7. Flow heating circuit

(except SLE 130 - 160)

8. Return heating circuit

(except SLE 130 - 160)

1. Cold water inlet connection

2. Auxiliary connection (DHW)

3. Domestic hot water connection

Connections

dimensions

SLE /

SLE Plus

Heating connection Ø 1" [F]

Optional electrical heating

element connection Ø 1"½ [F]

Connections

dimensions

SLE /

SLE Plus

Cold / hot water

connections Ø 3/4" [M]

Auxiliary

connections Ø 3/4" [F]

Smart Line SLE - SLE Plus : 661Y2100 • A

TECHNICAL CHARACTERISTICS

DOMESTIC HOT WATER PERFORMANCES

DHW performance :

Heating source = External boiler

connected to tank *

SLE

130

SLE

160

SLE /

SLE Plus

210

SLE /

SLE Plus

240

SLE /

SLE Plus

300

Peak ow at 40°C [∆T = 30K] L/10' 236 321 406 547 800

60°C [∆T = 50K] L/10' 117 161 209 272 370

Constant ow at 40°C [∆T = 30K] L/h 658 890 1132 1527 2100

60°C [∆T = 50K] L/h 320 465 576 769 970

Peak ow 1st hour at 40°C [∆T = 30K] L/60' 784 1063 1349 1820 2360

60°C [∆T = 50K] L/60' 384 549 689 913 1100

Maximum absorbed power kW 23 31 39 53 68

Reheat time Minutes 22 22 20 20 22

* Conditions : Primary circuit temperature : 85°C, water intake temperature : 10°C

MAXIMUM OPERATING CONDITIONS

Maximum Service Pressure [tank full of water]

- Primary circuit : .................................................3 bar

- DHW water circuit : ......................................8,6 bar

Maximum Temperature

- Maximum DHW temperature : ....................90°C

Supply Pressure (DHW circuit)

- Max. 6 bar without requiring a pressure reducing valve

Water Quality

- Chlorides < 150 mg/L

- 6 ≤ pH ≤ 8

- If the water hardness is > 20°fH, the installation of a water softener is recommended.

10 Smart Line SLE - SLE Plus : 661Y2100 • A

TECHNICAL CHARACTERISTICS

ELECTRICAL CHARACTERISTICS

Main characteristics SLE / SLE Plus

Rated voltage V~ 230

Rated frequency Hz 50

Optional heating element

The models SLE / SLE Plus can be installed with a self- controlled heating element with built-

in control safety thermostats. The control thermostat of the tank can not control the heating

element. To be mounted with an external box with a switch and a circuit breaker - not included

in the delivery.

Volt Amp Power Code

1 x 230 V 13 3 kW 10800081

3 x 400 V + N 4.4 3 kW 10800082

1 x 230 V 26 6 kW 10800083

3 x 400 V + N 8.8 6 kW 10800084

Wiring diagram

1. Manual reset high limit thermostat

2. Control thermostat [60/90°C]

Bk. Black

Br. Brown

Or. Orange

R. Red

W. White

Y/Gr. Yellow/Green

Y/Gr

T2S3 T1 NL1

T2 S3T1NL1

N/C

N/O

Andere Handbücher für Smart Line SLE 130

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACV Kessel Handbücher

ACV

ACV HeatMaster 201 Betriebsanleitung

ACV

ACV HeatMaster 25 TC Handbuch

ACV

ACV Delta G25 Fehlerbehebungshandbuch

ACV

ACV HeatMaster TC Service-Handbuch

ACV

ACV MCBA Bedienungsanleitung

ACV

ACV BNE 2 Condens Handbuch

ACV

ACV SL320 Betriebsanleitung

ACV

ACV E-Tech S Bedienungsanleitung

ACV

ACV HeatMaster 200N Booster Handbuch

ACV

ACV ACCU B 600 Betriebsanleitung

ACV

ACV The Challenger Leitfaden

ACV

ACV EVO S 40 Kurzanleitung

ACV

ACV TER 259 Bedienungsanleitung

ACV

ACV E-tech P 201 Montage- und Wartungsanleitung

ACV

ACV ECO Benutzerhandbuch

ACV

ACV Prestige 47 Betriebsanleitung

ACV

ACV Smart line SLE W 100 Benutzerhandbuch

ACV

ACV Delta Performance 25 Gebrauchsanweisung

ACV

ACV E-Tech W 09 Gebrauchsanweisung

ACV

ACV BNE Series Montageanleitung

ACV

ACV HeatMaster 100 N Bedienungsanleitung

ACV

ACV HeatMaster 200N Booster Bedienungsanleitung

ACV

ACV alfa Sprint S Benutzerhandbuch

ACV

ACV HR 601 Benutzerhandbuch

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung