Adam Equipment MTB Bedienungsanleitung
© Adam Equipment Company 2013 © Adam Equipment Company2013
ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than 40
years experience in the production and sale of electronic weighing equipment.
Adam products are predominantly designed for the Laboratory, Educational, Health and
Fitness, retail and Industrial Segments. The product range can be described as follows:
-Analytical and Precision Balances
-Compact and Portable Balances
-High Capacity Balances
-Moisture analysers / balances
-Mechanical Scales
-Counting Scales
-Digital Weighing/Check-weighing Scales
-High performance Platform Scales
-Crane scales
-Health and Fitness Scales
-Retail Scales for Price computing
For a complete listing of all Adam products visit our website at www.adamequipment.com
© Copyright by Adam Equipment Co. Ltd. All rights reserved. No part of this publication
may be reprinted or translated in any form or by any means without the prior permission of
Adam Equipment.
Adam Equipment reserves the right to make changes to the technology, features,
specifications and design of the equipment without notice.
All information contained within this publication is to the best of our knowledge timely,
complete and accurate when issued. However, we are not responsible for
misinterpretations which may result from the reading of this material.
The latest version of this publication can be found on our Website.
www.adamequipment.com
Adam Equipment
MTB SCALE
(Revision A1, Sept 2013)
(P.N. 7.00.6.6.0263 - Revision A1, September 2013)
© Adam Equipment Company 2013 © Adam Equipment Company2013
© Adam Equipment Company 2013 © Adam Equipment Company2013
SPECIFICATIONS
Capacity (max.) 20 kg 44 lb
Readability 0.005 kg 0.005 lb
Weighing units kg and lb
Power 6V, 500mA DC adapter
Batteries 4 x AA size
Pan Size
560 x 285 mm
(22” x 11.2”)
Overall Size (w x h x d)
560 x 350 x 175 mm
(22" x 13.75" x 7.0")
Net weight 3.2 kg (7 lb.)
OPERATION
Install batteries, ensuring the polarity is as shown in the battery holder, or insert the power adapter
jack into the connector on the rear of the scale and turn on.
Place the scale on a flat, very stable surface, and clear the scale platform.
Press the [ON/ZERO] key to turn on the scale.
Display will show 0.000 kg or 0.000 lb. depending on the last weighing unit selected.
It is now ready to weigh.
Put the subject on the scale platform, as central as possible. The display shows the weight.
Once reading is stable, the display flashes.
Press the [ON/ZERO] key briefly to tare the scale, setting the display to 0.000.
Any additional weight now added will displayed.
SELECT WEIGHING UNIT
Press the [MODE] key to change from kilograms to pounds and back again.
The display will show the weighing unit selected.
STORE THE WEIGHT
To store the displayed weight: Press the [MEM] key when the LCD display is flashing.
RECALL THE STORED THE WEIGHT
To recall the stored weight: Press the [MEM] key when the LCD display is at zero
Press it a second time to return to weighing.
To turn off the scale.
Press and hold the [ON/ZERO] key
The scale will turn off automatically after 5 minutes if it is not being used.
CALIBRATION
Place the scale on a flat, very stable surface, and clear the scale platform.
When the scale is off press the [MODE] key, then press the [ON/ZERO] key. Hold both keys down
until the display shows “CAL” then release both keys.
The display will show a number representing the internal count from the sensor
Press the [ON/ZERO] key briefly.
The display will flash “C10 “ and then show “ 0”.
Place a 10kg mass on the platform.
The display will show a number from the sensor.
Press the [ON/ZERO] key.
The display will flash “C20 “ and then show “ 0000”.
Press the [ON/ZERO] key again, the display will show “End” then turn off.
The calibration is complete.
Remove the 10kg mass from the platform and turn on the scale.
Place the 10kg on the scale, it should display 10.000kg ±0.010kg. If it is not within acceptable
values repeat the calibration.
WARNING MESSAGES
“Loo”: Low power, please change the batteries.
“o_Ld”: Over loading (>23 kg, 50 lb), please remove the item immediately to protect the scale.
© Adam Equipment Company 2013 © Adam Equipment Company2013
WARRANTY INFORMATION
Adam Equipment offers Limited Warranty (Parts and Labour) for components which fail due
to defects in materials or workmanship. Warranty starts from the date of delivery.
During the warranty period, should any repairs be necessary, the purchaser must inform its
supplier or Adam Equipment Company. The company or its authorised Technician reserves
the right to repair or replace the components at any of its workshops depending on the
severity of the problems. However, any freight involved in sending the faulty units or parts
to the service centre should be borne by the purchaser.
The warranty will cease to operate if the equipment is not returned in the original packaging
and with correct documentation for a claim to be processed. All claims are at the sole
discretion of Adam Equipment.
This warranty does not cover equipment where defects or poor performance is due to misuse,
accidental damage, exposure to radioactive or corrosive materials, negligence, faulty
installation, unauthorised modifications or attempted repair or failure to observe the
requirements and recommendations as given in this User Manual. Additionally rechargeable
batteries (where supplied) are not covered under warranty.
Repairs carried out under the warranty does not extend the warranty period. Components
removed during the warranty repairs become the company property.
The statutory right of the purchaser is not affected by this warranty. The terms of this
warranty is governed by the UK law. For complete details on Warranty Information, see the
terms and conditions of sale available on our web-site.
Andere Handbücher für MTB
2
Andere Adam Equipment Skala Handbücher
Adam Equipment
Adam Equipment CRW Series Bedienungsanleitung
Adam Equipment
Adam Equipment CQT 202 Montageanleitung
Adam Equipment
Adam Equipment BFW 75 Bedienungsanleitung
Adam Equipment
Adam Equipment Cruiser CKT Series Bedienungsanleitung
Adam Equipment
Adam Equipment NBL 84 e/i Bedienungsanleitung
Adam Equipment
Adam Equipment ADK 10 Bedienungsanleitung
Adam Equipment
Adam Equipment WBZ 3 Bedienungsanleitung
Adam Equipment
Adam Equipment AQT Series Bedienungsanleitung
Adam Equipment
Adam Equipment Luna LAB Series Bedienungsanleitung
Adam Equipment
Adam Equipment CPW 25 Bedienungsanleitung
Adam Equipment
Adam Equipment CFC SERIES Bedienungsanleitung
Adam Equipment
Adam Equipment CORE SERIES Bedienungsanleitung
Adam Equipment
Adam Equipment LBK Series Bedienungsanleitung
Adam Equipment
Adam Equipment PGL SERIES Bedienungsanleitung
Adam Equipment
Adam Equipment AZextra 3 Bedienungsanleitung
Adam Equipment
Adam Equipment CPWplus 6 Bedienungsanleitung
Adam Equipment
Adam Equipment QBW Series Bedienungsanleitung
Adam Equipment
Adam Equipment IHS Series Bedienungsanleitung
Adam Equipment
Adam Equipment GBC Series Bedienungsanleitung
Adam Equipment
Adam Equipment CB 501 Bedienungsanleitung
