Adaptec AUA-1420 Bedienungsanleitung

AUA-1420

USB2connect for Notebooks Adapter

Installation Guide

This Installation Guide describes how to install the Adaptec AUA-1420

USB2connect for Notebooks adapter and its associated drivers in a

notebook computer.

Taking Inventory

Your USB2connect for Notebooks kit includes the USB2connect for

Notebooks adapter and the USB2connect for Notebooks CD, which

includes the following:

■Readme file

■USB2connect for Notebooks User’s Guide in Acrobat format, which

contains complete installation information, Customer Support and

Warranty information, and troubleshooting tips.

■Adobe Acrobat software

■Windows drivers

■Product registration information

Installation for Windows Notebooks

1With your notebook computer on, insert the USB2connect for

Notebooks adapter in the CardBus slot.

2Insert the USB2connect for Notebooks CD.

Proceed with instructions appropriate to your operating system:

■Windows XP on page 3

■Windows 2000 on page 6.

■Windows Me on page 8.

■Windows 98 SE on page 9.

CardBus slot

USB2connect for

Notebooks adapter

Windows XP

Continue here after performing steps outlined on page 2.

1Start Windows XP.

Windows XP will automatically discover the new hardware and start

the Found New Hardware Wizard to walk you through the device

driver installation.

2Select Install from a list or specific location (Advanced), then select

Next.

3Select Don’t search, I will choose the driver to install, then click

Next.

4Click Next again.

5Click Have Disk.

6Insert the Adaptec USB2connect CD into the CD-ROM drive. Type

the drive letter for your CD-ROM drive in the Copy manufacturer’s

files from box, as shown below, and click OK.

Note: Your CD-ROM drive may have a different drive letter than

the one shown in the example above.

7On the next screen, click Continue Anyway.

8When the installation is complete, click Finish.

9If you are prompted to restart the computer, click Yes.

Note:

For instructions on verifying the driver installation, see the

USB2connect for Notebooks User’s Guide

on the CD.

Windows 2000

Continue here after performing steps outlined on page 2.

1When the Found New Hardware Wizard begins, click Next,

accepting the recommendations and defaults presented by the

wizard.

2On the Locate Driver Files window, uncheck all options except

CD-ROM drives, and click Next.

On the Driver Files Search Results window, ensure that

Install one of the

other drivers

not

checked, and click

4When Windows is finished copying drivers, click Finish.

5Restart your computer if prompted to do so.

Note:

For instructions on removing the USB2connect for Notebooks

adapter from a Windows 2000 notebook, see the

USB2connect for

Notebooks User’s Guide

on the CD.

Windows Me

Continue here after performing steps outlined on page 2.

1When the Add New Hardware Wizard opens, click Next.

2If you see a message that the PCI Universal Serial Bus driver was not

located, select Automatic search for a better driver (Recommended).

Then, click Next.

3When Windows has finished copying the USB 2.0 drivers from the

USB2connect for Notebooks CD, click Finish.

4Restart your computer if prompted to do so.

Windows 98 SE

Windows 98 SE requires two device driver installations using the Add

New Hardware Wizard because the operating system has no embedded

USB drivers. During driver installation, you may need to use the

Windows 98 SE CD.

Continue here after performing steps outlined on page 2.

1The Found New Hardware Wizard opens. Click Next.

2The Add New Hardware Wizard opens. Click Next.

Select

Search for the best driver for your device (Recommended)

and click Next.

4In the following window, uncheck all options and click Next.

Andere Handbücher für AUA-1420

Inhaltsverzeichnis

Andere Adaptec Adapter Handbücher

Adaptec

Adaptec AHA-3985 Kurzanleitung

Adaptec

Adaptec ASH-1205SA Bedienungsanleitung

Adaptec

Adaptec 1220SA - RAID Controller Bedienungsanleitung

Adaptec

Adaptec PC/104 Bedienungsanleitung

Adaptec

Adaptec SlimSCSI APA-1460A Bedienungsanleitung

Adaptec

Adaptec AUA-1411 Bedienungsanleitung

Adaptec

Adaptec RCM-FC2500 Bedienungsanleitung

Adaptec

Adaptec 29320LP-R - SCSI Card RAID Controller Bedienungsanleitung

Adaptec

Adaptec P2280A Bedienungsanleitung

Adaptec

Adaptec 72405 Bedienungsanleitung

Adaptec

Adaptec XHub2 - Hub - USB Bedienungsanleitung

Adaptec

Adaptec AHA-3940 Bedienungsanleitung

Adaptec

Adaptec Trantor T260 Handbuch

Adaptec

Adaptec Ultra Wireless Ultra WirelessTM USB Adapter Bedienungsanleitung

Adaptec

Adaptec AHA-2740W Bedienungsanleitung

Adaptec

Adaptec AHA-1510A Series Bedienungsanleitung

Adaptec

Adaptec 19160 - SCSI Card Storage Controller U160 160... Service-Handbuch

Adaptec

Adaptec 29320ALP Bedienungsanleitung

Adaptec

Adaptec APA-9310 Installations- und Betriebsanleitung

Adaptec

Adaptec 2126700 - Ultra ATA Card 1233 Storage... Bedienungsanleitung

Adaptec

Adaptec Adaptec Series 8 SAS/SATA RAID Referenzhandbuch

Adaptec

Adaptec APA-1350 Bedienungsanleitung

Adaptec

Adaptec ACB-2002A Bedienungsanleitung

Adaptec

Adaptec AHA-2920 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung