Adaptec ICP 5045BL Bedienungsanleitung

--------------------------------------------------------------------

README.TXT

ICP ICP9085LI/ICP5085BR SAS RAID Controller

ICP ICP9047MA/ICP9087MA SATA RAID Controller

ICP ICP9014RO/ICP9024RO SCSI RAID Controller

ICP ICP5805BL/ICP5045BL/ICP5085BL/ICP5125BR/ICP5165BR Unified Serial Controllers

as of September 14, 2007

--------------------------------------------------------------------

Please review this file for important information about issues

and erratas that were discovered after completion of the standard

product documentation. In the case of conflict between various

parts of the documentation set, this file contains the most

current information.

NOTE: The latest BIOS and documentation can be downloaded

from www.icp-vortex.com.when they become available.

The following information is available in this file:

1. Software and Documentation

1.1 Controller & Utility Software

1.2 Documentation on this CD

2. Installation Instructions

3. General Cautions

4. Known Limitations

4.1 Booting to a bootable CD

4.2 ICP9014RO/ ICP9024RO controllers

4.3 ICP9024RO controller

4.4 ICP9085LI controller

4.5 Using the controller in a Dell Precision 530

4.6 ACU utility

4.7 FreeBSD

4.8 ICP Storage Manager

4.9 ICP5085BR/ICP ICP5805BL/ICP5045BL/ICP5085BL/ICP5125BR/ICP5165BR

controllers

4.10 OpenServer 6.0

4.11 SAS and SATA controllers and Adaptec 335SAS enclosure

4.12 Using the ICP5085BR in a Gateway 920

4.13 Creating an Array from the ICP Storage Manager CD

4.14 Using the controller with an Adaptec S50 JBOD Enclosure

4.15 SMART errors on SATA controllers

4.16 Firmware upgrades

4.17 RAID 10/50/60 array leg limitations

4.18 Microsoft VDS Storage Manager LUN Error

4.19 ICP5085BR controller

4.20 UnixWare and OpenServer

4.21 SATA disks do not support Dual Path with Expanders

4.22 Usage of firmware, utilities and flash tools

4.23 DOS OS not supported

4.24 DAT drive restoration fails when spanning tapes

--------------------------------------------------------------------

1. Software and Documentation

1.1. Controller & Utility Software

Note: The latest versions of BIOS and driver software

can be downloaded from www.icp-vortex.com when they become

available.

- BIOS

- ACU

- Windows Drivers

o Windows 2000 Server, Advanced Server, Professional

o Windows 2003 Server, Enterprise, Standard, and Web Edition

o Windows XP Professional

o Windows Vista - All versions

- Linux Drivers

o Red Hat Enterprise 4.0, IA-32 and x64

o Red Hat Enterprise 5.0, IA-32 and x64

o SuSE Linux Enterprise Server 9.0, IA-32 and x64

o SuSE Linux Enterprise Server 10.0, IA-32 and x64

- FreeBSD Drivers

o FreeBSD 5.3, 5.4 (ARCCONF 32-bit only)

o FreeBSD 6.1 (ARCCONF 32/64-bit only)

- SCO Drivers

o OpenServer 6.0

o UnixWare 7.1.4

- VMware Drivers

o VMware ESX Server 3.0.1

- Sun Solaris Drivers

o Solaris 10 Update 1

1.2. Documentation on this CD

- ICP SAS, SATA, and SCSI RAID Controllers Installation

and User's Guide

- ICP SAS, SATA, and SCSI RAID Controllers

README.TXT file

--------------------------------------------------------------------

2. Installation Instructions

- The ICP SAS, SATA, and SCSI RAID Controllers Installation

and User's Guide contains complete installation information for

the controllers and drivers, as well as complete instructions

for all utilities. The ICP Storage Manager User's Guide

contains complete installation information for the ICP

Storage Manager software.

--------------------------------------------------------------------

3. General Cautions

- While an array is being built or cleared, DO NOT remove and

reinsert any drive from that array. Doing so may cause

unpredictable results for any of the controller's arrays.

- While a drive is being cleared, DO NOT try to include it in a

new array. Doing so may cause unpredictable results.

- DO NOT move drives containing an array or volume from one

controller to another while the power is on. Doing so could

cause the loss of the array configuration or data, or both.

Instead, power off both affected controllers, move the drives,

and then restart.

--------------------------------------------------------------------

4. Known Limitations

4.1 Booting to a bootable CD

A system cannot boot to a bootable CD in a SCSI optical drive,

such as CD or DVD drive, connected to the ICP9024RO SCSI RAID

controller.

4.2 ICP9014RO/ICP9024RO controllers

Use only the utilities/flash tools included with this release.

Upgrade any existing tools to those included with this

release, as this release supports additional features that

were not available with previous releases

4.3 ICP9024RO controller

With an Intel Pro/1000 MT 32-bit PCI NIC on the system, after

controller POST the controller goes to a

BLED 0xEF NMI_HANDLER_FAILURE.

4.4 ICP9085LI controller

When the controller is connected to an external enclosure,

only the internal SAS connector closest to the bracket is

available for use with internal SAS or SATA disk drives. The

other internal SAS connector shares the SAS bus with the

external connector, which is occupied.

Various devices on the serial bus can negotiate at different

speeds. To determine the speed at which a particular device

is negotiating, view the device properties in ICP Storage

Manager. (Click on the device, then click the Properties

button.)

4.5 Using the controller in a Dell Precision 530

When using the controller in a Dell Precision 530 with

Diskercise and Diskstress, data corruption/miscompares may

occur.

4.6 ACU utility

On some Intel and IBM systems, when you try to run the ACU,

this message appears:

“Not enough free memory to load the utility!

Press any key to attempt loading the utility forcibly

OR Wait for the system initialization to be completed

[Default]”

This is normal. On Intel systems, wait for the system

initialization to be completed. Then the ACU will run. On IBM

systems, press any key when prompted to load the utility

forcibly.

The ACU /C0 buildall command does not start a build/verify on

RAID 1 or RAID 10 arrays that are being created using the

quick init method.

4.7 FreeBSD

ICP Storage Manager is not supported in FreeBSD; storage

management must be done through the ICP Configuration

Utility (ACU) and ARCCONF command line utility.

4.8 ICP Storage Manager

After a rebuild and waking up from hibernation, a controller

may be detected incorrectly in ICP Storage Manager.

Press F5 to correct the problem.

4.9 ICP5085BR/ICP ICP5805BL/ICP5045BL/ICP5085BL/ICP5125BR/ICP5165BR

controllers

When the controller is installed in PCI-E slot 2 of a

Dell PE 1800 system, there is no BIOS POST.

When the controller is installed in PCI-E slot 3 in a

Dell PE 1800 system, the system halts and the keyboard locks

up.

When the controller is set to boot from a RAID array and a

second RAID array is created, the controller may no longer

be able to find the boot drive.

When the controller is installed in the primary PCIe slot of

an Intel 955X or nVidia nForce4 (Intel edition) motherboard,

if you use the Adaptec Flash Utility to perform a Mode0 flash,

the controller will show incorrectly and cannot be flashed. If

a Mode0 flash is required, install the controller in an

alternate PCIe slot or alternate computer.

4.10 OpenServer 6.0

Arrays may not be displayed correctly, even after you restart

your computer.

To resolve the problem:

As root, run 'resmgr -r -m vtoc' until it fails. Then, as

root, run '/etc/conf/bin/idconfupdate -f'. Then, reboot.

4.11 SAS and SATA controllers and Adaptec 335SAS enclosure

When the Adaptec 335SAS enclosure is attached to an ICP

SAS controller, such as ICP9085LI or ICP5085BR, the

enclosure numbering nomenclature starts with "0". For

example, if two Adaptec 335SAS enclosures are connected to an

ICP9085LI SAS controller, management tools such as Storage

Manager will denote the enclosures as "Enclosure 0" and

"Enclosure 1". When the Adaptec 335SAS enclosure is attached

to an Adaptec SATA controller, such as ICP9047MA or

ICP9087MA, the enclosure numbering nomenclature starts with

"14". For example, if two Adaptec 335SAS enclosures are

connected to an ICP9087MA controller, management tools such

as Storage Manager will denote the enclosures as

"Enclosure 14" and "Enclosure 15".

4.12 Using the ICP5085BR in a Gateway 920

When more than one ICP5085BR controllers are installed in a

Gateway 920 server, the system will not POST.

4.13 Creating an Array from the ICP Storage Manager CD

When you create an array with the ICP Storage Manager

bootable CD, the maximum size of the array is 2 TB.

4.14 Using the controller with an Adaptec S50 JBOD Enclosure

Temperature warnings from Adaptec S50 JBOD Enclosure (firmware

version T016) are not shown in Adaptec Storage Manager (or on

the enclosure).

4.15 SMART errors on SATA controllers

During POST, SMART errors for disk drives connected to SATA

controllers are indicated as follows:

o N = No SMART errors reported

o Y = SMART errors reported

o N/A = Disk drive does not support SMART error reports

4.16 Firmware upgrades

Check your controller BIOS settings after upgrading the

controller firmware/BIOS, as the BIOS may have been reset to

its default settings during the upgrade.

4.17 RAID 10/50/60 array leg limitations

A RAID 10, RAID 50, or RAID 60 array cannot have more than 32

legs when created using the Build method. Maximum disk drive

count is only limited by RAID level. For instance, a RAID 10

array built with 32 RAID 1 legs (64 disk drives) is supported;

a RAID 5 array built with 32 RAID 5 legs (96 disk drives) is

also supported. Although you can create a RAID 10 array with

more than 64 drives using the Quick Init method, the maximum

number of build/verify operations that can happen at any one

time is 32; therefore, such an array could not be verified.

4.18 Microsoft VDS Storage Manager LUN Error

On some systems when creating a new LUN, the Microsoft VDS

Storage Manager for SANs snap-in may not work properly and

crash with an MMC snap-in error.

4.19 ICP5085BR controller

On Intel 945X or 955X motherboards with Mode0 set, the controller

is not recognized when installed in the primary 16x PCIe slot.

4.20 UnixWare and OpenServer

Adding or moving controllers in an existing UnixWare or OpenServer

system may cause some device resources to change, which may lead

to the operating system being unable to boot. Currently, there

is no workaround available in the operating system. Before

installing the operating system, make sure all PCI devices are

either enabled or installed.

The individual behavior and affected devices will vary from system

to system. This is due to the different ways in which motherboards

may handle their PCI bus layouts, and how those layouts could be

changed when installing or rearranging devices. If the bus layout

changes and affects a critical system device (video, boot controller,

etc.) then the operating system may be unable to recover from that

change and be non-bootable.

4.21 SATA disks do not support Dual Path with Expanders

Connect Dual Path SAS Enclosures with 2 Expanders only via one

Expander when using SATA disks, SATA disks do not support

Dual Path. If SATA disks are connected using 2 Expanders the

controller BIOS may crash.

4.22 Usage of firmware, utilities and flash tools

Use only the utilities/flash tools included with this release.

Upgrade any existing tools to those included with this release,

as this release may support additional features that were not

available with previous releases.

4.23 DOS OS not supported

The DOS environment is supported for Adaptec tool execution only

(AFU.EXE and ACU.EXE).

4.24 DAT drive restoration fails when spanning tapes

When restoring from two or more tapes with a Sony SDX-470,

Sony SDX-570, or Quantum DLT V4 DAT drive, the operation aborts

automatically when restoring the second tape but gives the

(erroneous) message "Restore Operation has Completed".

--------------------------------------------------------------------

This software contains the valuable trade secrets of Adaptec or its

licensors. The software is protected under international copyright

laws and treaties. This software may only be used in accordance with

the terms of its accompanying license agreement.

No part of this publication may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, recording or otherwise, without prior

written consent of Adaptec, Inc., 691 South Milpitas Blvd.,

Milpitas, CA 95035.

Andere Handbücher für ICP 5045BL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Adaptec Controller Handbücher

Adaptec

Adaptec 2256100-R Bedienungsanleitung

Adaptec

Adaptec AAR-2020SA Merkblatt

Adaptec

Adaptec 2025ZCR - SCSI RAID Storage Controller Bedienungsanleitung

Adaptec

Adaptec 2930U2 - Storage Controller Ultra2 SCSI 80... Service-Handbuch

Adaptec

Adaptec ACB-2322B Bedienungsanleitung

Adaptec

Adaptec GDT8546RZ - ICP Vortex RAID Controller Bedienungsanleitung

Adaptec

Adaptec ASR-5085 Handbuch

Adaptec

Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID... Bedienungsanleitung

Adaptec

Adaptec Workstation xw4100 Sicherheitsleitfaden

Adaptec

Adaptec RAID 6405E Bedienungsanleitung

Adaptec

Adaptec GDT6110 Bedienungsanleitung

Adaptec

Adaptec 58300 - SAS Storage Controller 300 MBps Bedienungsanleitung

Adaptec

Adaptec 2231700-R - 5M Int Mini-sas X4 SFF-8087 Bedienungsanleitung

Adaptec

Adaptec AAR-2420SA Merkblatt

Adaptec

Adaptec 2120S - SCSI RAID Controller Bedienungsanleitung

Adaptec

Adaptec 29320-R - SCSI Card RAID Controller Bedienungsanleitung

Adaptec

Adaptec 2258400-R - 51245 RAID 512MB PCI-Express... Bedienungsanleitung

Adaptec

Adaptec PowerDomain 29160N Bedienungsanleitung

Adaptec

Adaptec ACB-4525Z Bedienungsanleitung

Adaptec

Adaptec ACB-2310 Bedienungsanleitung

Adaptec

Adaptec GDT8546RZ - ICP Vortex RAID Controller Bedienungsanleitung

Adaptec

Adaptec 44300 Bedienungsanleitung

Adaptec

Adaptec ASR-3085 Betriebsanleitung

Adaptec

Adaptec AAR-1420SA Merkblatt

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung